design

400 Commonwealth Drive, Warrendale, PA 15096-0001 U.S.A. Tel: (724) 776-4841 Fax: (724) 776-5760 Web: 6215ff9951e79b8968022666 SAE TECHNICAL

PAPER SERIES 2004-01-1657

Sizing in Conceptual Design at BMW

Ingo Raasch

BMW AG

Reprinted From: CAD/CAM/CAE Technology and Design Tools

(SP-1858)

2004 SAE World Congress

Detroit, Michigan

March 8-11, 2004

Licensed to Hefei University of Technology

Licensed from the SAE Digital Library Copyright 2010 SAE International

E-mailing, copying and internet posting are prohibited

Downloaded Saturday,

DX8-04F-MultifactorRSM-IVopt.docx Rev. 5/17/10

Multifactor RSM Tutorial

(Optimal design)

This tutorial details how Design-Expert® software crafts a response surface method (RSM) experiment within an irregular process space.

A food scientist wants to optimize a wheat product cooked at varying times versus temperatures. After a series of screening and in-depth factorial designs, the search for a process optimum has been narrowed to two factors, ranging as follows:

A. Temperature, 110 to 180 degrees C.

B. Time, 17 to 23 minute

Following up with the speech technology development, spoken dialogue systems are getting commercialized. Many public transportation companies, call centres, tourist information centres, etc are using spoken dialogue systems instead of the touch-tone teleco

User’s Experience of a Commercial Speech Dialogue System

Fang Chen, Yael Katzenellenbogen

Interaction Design Group

Department of Computer Science and Engineering Chalmers University of Technology, Gothenburg, Sweden

fanch@cs.chalmers.se

Abstract Following up with the speech te

1

? Copyright by Ami Abraham Silberman, 1997

RTM — DESIGN AND IMPLEMENTATION

BY

AMI ABRAHAM SILBERMAN

A. B., Cornell University, 1985

M.S., University of Illinois, 1989

THESIS

Submitted in partial fulfillment of the requirements

for the degree of Doctor of Philosophy in Computer Science in the Graduate College of the

University of Illinois at Urbana-Champaign, 1997

Urbana, Illinois

RTM —Design and Implementation

Ami Abraham Silberman, Ph.D.

Department of Computer Science

University of Illinois at Urbana-Champaign, 1997

Jane W. S. Liu, Advi

Following up with the speech technology development, spoken dialogue systems are getting commercialized. Many public transportation companies, call centres, tourist information centres, etc are using spoken dialogue systems instead of the touch-tone teleco

User’s Experience of a Commercial Speech Dialogue System

Fang Chen, Yael Katzenellenbogen

Interaction Design Group

Department of Computer Science and Engineering Chalmers University of Technology, Gothenburg, Sweden

fanch@cs.chalmers.se

Abstract Following up with the speech te

Integrating Hardware Description

Languages and Proof Systems?

K.G.W.Goossens

Laboratory for Foundations of Computer Science

Department of Computer Science

University of Edinburgh

Scotland,UK

1The Problem

Simulation in Hardware Design and Testing

Hardware description languages(hdl s)have been used in industry since the1960s to document and simulate hardware designs.Simulation of hdl descriptions is very useful to ?nd design faults without the need to manufacture the design.A well known drawback of simulation,however,is that the numbe

第1章 Cadence IC 5.1.41 的基本设置

本章是 Cadence IC 5.1.41 是设计 的简明入门教程，目的是让读者在刚接触该软件的时候 对它的基本功能有一个总体的了解。本章主要内容如下：[1] 启动 Cadence IC 前的准备；[2] Command Interpreter Window (CIW, 命令行窗口)；[3] Library Manager 设计库管理器；[4] Virtuoso? Schematic Editor 电路图编辑器简介；[5] Virtuoso? Analog Design Environment (ADE) 简 介。

1.1 启动前的准备

要在 Unix/Linux 使用 Cadence IC 5.1.41 工具应当保证以下的条件：

[1] 保证 Cadence IC 5.1.41 已经由管理员正确地安装在电脑上；并且软件授权密钥已经设置

完成。 [2] 在 Shell 中设置了正确的环境变量。 必须将 Cadence IC 的安装路径加入 Shell 环境变量，Cadence IC 5.1.41 才能正常运行。以 Cshell 为例，Cadence IC 被安装在了/tools/

bucuo de dongxi

I. Functional Description

(Algorithm overview and description; missions and tasks of the module)

II. Module Micro-architecture

(A very detailed section; put as many details as possible; should be a heavy section)

(A) Design Requirements

(B) Block Diagrams and Description

(Block diagram – in hierarchical form for complicate designs)

(Describe what each block does; and the thoughts how and why it is micro-architected so)

(C) State Machine Diagram and description

(Major state diagrams in your design, and describe/explain

ONEDAY第一讲

1.万事开头难，从建立一个 *.DDB 文件开始

2.定义新建*.DDB的选项.GIF

3.所有新建的文件一般放置在主文件夹中

4.进入并新建*.SCH

5.新建一个*.SCH文件（注意看一下那些中文的文字注释）

6.添加新的零件库.GIF

7.下面这个就是具体的添加方法了

8.做好这些我们就可以开始进行画一个漂亮的SCH格式的原理图了

ONEDAY第二讲

开始画原理图啦! 首先要先设置一下，去掉讨厌的网格显示

在这里我们利用先前添加好的SCH零件库做一个简单的SCH格式原理图，然后进行自动布线

1.如何调出SCH零件进行并且进行属性设置

教学设计经典文献A History of Instructional Design and Technology Part II A__ History of Instructional Design

A History of Instructional Design and Technology: Part II: A History of Instructional DesignRobert A. Reiser

This is the second of a two-part article that discusses the history of the field of instructional design and technology in the United States. The first part, which focused on the history of instructional media, appeared in the previous issue of this journal (volume 49, number 1). This part of the article focuses on the