Cadence中Capture向Allegro中导入网表时的常见错误
更新时间:2024-07-11 09:19:01 阅读量: 综合文库 文档下载
一、Capture生成netlist的时候报错:
1. Unable to open c:\\Cadence\\PSD_14.2\\tools\\capture\\allegro.cfg for reading. Please correct the above error(s) to proceed 错误解释:
allegro.cfg文件找不到或allegro.cfg文件不能打开,这个问题的根源是,有可能每台电脑上安装Allegro的的位置不一样,allegro.cfg文件找不到是理所当然的。 处理办法:
点生成netlist,点setup,修改路径为capture\\allegro.cfg所在路径,把allegro.cfg文件的位置选择你现在安装目录的文件位置。
2. Spawning... \-pst -d \\
\\
#1 Error [ALG0012] Property \instance U3: SCHEMATIC1, PAGE1 (2.00, 2.10).
#2 Error [ALG0012] Property \instance C2: SCHEMATIC1, PAGE1 (2.30, 0.30).
#17 Aborting Netlisting... Please correct the above errors and retry. 错误解释:
Error [ALG0012] Property \Footprint\missing from part
在Allegro中,每个器件都需要一个PCB封装。所以在取消列出网表之前,软件会列出所有没有此项的器件。你可以选择列出的器件添加PCB封装,然后选择Edit Properties来编辑器件的值。 处理办法:
在导出Netlist 之前,只需要保证每个器件都是有封装的,且器件PCB Footprint值与对应的.dra封装文件名一致。
3. [DRC0011] Reference is invalid for this part
The reference for the part is invalid. For example, this occurs when a part reference like U?A has not been updated. Update the part reference。
Reference项不可随意修改。
4. Pin numbers do not match. Check device file.
原因:原理图中的晶振给了两个管脚,而其封装却是四个管脚。 原理图与PCB封装对应原则:
除了PCB Footprint的名字要写对以外,还有一点,就是原理图的元件的管脚数目一定要和封装的管脚数目必须一样。这里说的管脚,包括了原理图中可能没有现实的Power Pins,不包括封装中的machanical pins;另外,原理图和封装的对应关系是依靠pin number来建立的,所以两者的相应的pin number一定要一样,而pin number是不是数字并没有关系。
5. ERROR(SPMHNI-191): Device/Symbol check error detected. WARNING(SPMHNI-337): Unable to load symbol 'HDR1X2' for device
'B2S_HDR1X2_B2S': WARNING(SPMHUT-127): Could not find padstack 57S40DP.
due to ERROR(SPMHDB-274): Unable to load flash symbol THS79X59X45X4X15 (Check PSMPATH setting for this symbol).\ 原因:花焊盘Flash没有创建.fsm的symbol文件,或是该文件保存路径与.psm文件不一致。
二、Allegro导入netlist的时候报错can not find symbol:
出现Netrev succeeded即可,说明已没有error了,可以直接打开自动生成的.brd文件了。但此时Updating Allegro PCB Editor Board仍然会有红叉,貌似还有问题。果然,在QuickPlace的时候,有一些器件的Footprint无法Place,提示的错误原因是can not find symbol,不知所云。
有一种可能就是Allegro工作区的面积不够大,而QuickPlace放置的Footprint都位于Outline范围之外,因而如果工作区面积设置的不够大的话,会导致有一些器件的Footprint无法Place。
还有一种可能就是元件在原理图中的引脚数目与Footprint中的引脚数目不一致。这是也会出现Netrev succeeded,同时有警告,但是同样会导致这些器件的Footprint无法Place。
第三种可能: 在导入Netlist时会产生如下警告:
WARNING(SPMHNI-192): Device/Symbol check warning detected.
WARNING(SPMHNI-337): Unable to load symbol '8P4R_0402_CN_42' for device 'RESARR_IS_4/SM_8P4R_0402_CN_4_1': WARNING(SPMHUT-127): Could not find padstack 8P4R-0402_CN-42_BIGPAD.
即找不到PAD文件。如果本身就没有PAD文件,则按照Datasheet上面引脚大小自己画一个;若有PAD文件,则应设置好路径:在PCB Editor中Setup→User Preferences→Design_paths,设置padpath和psmpath;若对PAD文件进行过修改(包括重命名),则应在PCB Editor中Tools→Padstack,Replace或Refresh。
第四种可能:.dra封装文件有DRC错误。此时在生成网表时,在Capture的Session Log中只会有Warning而无Error,但QuickPlace仍无法放置该Footprint。如何修改DRC错误。
WARNING(SPMHNI-337): Unable to load symbol '8P4R_0402_CN_42' for device 'RESARR_IS_4/SM_8P4R_0402_CN_4_1': WARNING(SPMHUT-127): Could not find padstack 8P4R-0402_CN-42_BIGPAD.
即找不到PAD文件。如果本身就没有PAD文件,则按照Datasheet上面引脚大小自己画一个;若有PAD文件,则应设置好路径:在PCB Editor中Setup→User Preferences→Design_paths,设置padpath和psmpath;若对PAD文件进行过修改(包括重命名),则应在PCB Editor中Tools→Padstack,Replace或Refresh。
第四种可能:.dra封装文件有DRC错误。此时在生成网表时,在Capture的Session Log中只会有Warning而无Error,但QuickPlace仍无法放置该Footprint。如何修改DRC错误。
正在阅读:
Cadence中Capture向Allegro中导入网表时的常见错误07-11
项目开盘流程图03-10
基于Wordpress实现个人博客网站的开发毕业设计04-25
闽南古城游作文300字06-24
景观绿化施工工程招标文件08-14
热动工程师热力基础题库12-01
狐狸与乌鸦续写600字07-07
不积跬步无以至千里12-01
九年级知识与能力训练化学答案03-18
理财学复习资料 doc03-22
- 多层物业服务方案
- (审判实务)习惯法与少数民族地区民间纠纷解决问题(孙 潋)
- 人教版新课标六年级下册语文全册教案
- 词语打卡
- photoshop实习报告
- 钢结构设计原理综合测试2
- 2014年期末练习题
- 高中数学中的逆向思维解题方法探讨
- 名师原创 全国通用2014-2015学年高二寒假作业 政治(一)Word版
- 北航《建筑结构检测鉴定与加固》在线作业三
- XX县卫生监督所工程建设项目可行性研究报告
- 小学四年级观察作文经典评语
- 浅谈110KV变电站电气一次设计-程泉焱(1)
- 安全员考试题库
- 国家电网公司变电运维管理规定(试行)
- 义务教育课程标准稿征求意见提纲
- 教学秘书面试技巧
- 钢结构工程施工组织设计
- 水利工程概论论文
- 09届九年级数学第四次模拟试卷
- 中导
- 入网
- 常见
- 错误
- Cadence
- Capture
- Allegro
- STM32F10x_SPI与I2S
- 《第一单元写作 写诗歌》教学设计
- 非晶合金的制备技术
- 2018人教版小学语文公开课优秀教案《开满鲜花的小路》教学设计与
- 安全生产综合监管工作面临的突出问题及其对策
- 血与泪的呼唤观后感
- 格兰仕日用电器营销渠道问题及对策研究
- Flash CS3课后习题参考答案
- 弘农杨氏世祖系总表目录 (1)
- 会展场馆篇
- 年产400万件(套)机械配件加工生产线项目可行性研究报告书
- 汉族丧葬仪式研究综述(修改稿一)
- 科室工作人员年终总结
- 浙江省历考年高考分数线及对应平均分试
- 河北省衡水中学2018届高三生物上学期五调考试试题
- 建筑施工技术课程设计
- 2017黑龙江公务员面试综合分析题技巧
- 2018-2024年中国浓缩果汁行业市场深度分析报告(目录) - 图文
- 经济学经济师基础重点
- 老师作文之女学生被老师打屁屁图片和作文