哈斯操控面板-加工中心

哈斯操作面板

哈斯操作面板

版本各异 排布相同

哈斯操作面板

显示键 — 即使机床在运行中也可按任何的显示键 光标键 功能键 进给键

模态键

超控键

数字键

字母键

哈斯操作面板

位置键:POSITION (MEM)O91002 N0000

按或

(OPERATOR) X Y Z 0.0000 in 0.0000 in 3.5179 in

(WORK G54) X -9.0000 in Y -7.0000 in Z 3.5179 in (DIST TO GO) X 0.0000 in Y 0.0000 in Z 0.0000 in

可呈不同显页: Operators (操作坐标) Work (工作坐标) Machine (机床原点) Dist-to-Go (剩余距离)在 Debug 模态 可查阅 机床的原始数据

(MACHINE) X Y Z 0.0000 in 0.0000 in 3.5179 in

哈斯操作面板

POS-OPER (操作坐标系显页)输入 X, Y, Z 等键 再 按 <ORIGIN> 可分别各轴清零在手动模态: 按 X, Y, Z 进给键 再 按 <ORIGIN> 可分别各轴清零 你可输入例如: Z 3.5179 再 按 <ORIGIN> 显页则呈现其读数POS-OPER (MEM)O91002 N0000

X 0.0000 in Y 0.0000 in Z 3.5179 in

哈斯操作面板

POS-TO-GO (剩余距离)POS-TO-GO(MEM) O91002 N0000

显页 POS-TO-GO 在运行模态: 各轴进给剩余距离动态 在手动模态: 各轴位移累计动态 如果按不同的模态键再回 按手动模态键将会自动调零

X 0.0000 in Y 0.0000 in Z 0.0000 in

哈斯操作面板

偏置键——刀具偏置OFFSET 包括: 刀具偏置 和 工作坐标偏置. 重复点按 <OFFSET> 键会循环两界面. 输入 数字 并且 按 <F1> 新读数会覆盖旧读数; 按 <F2> 会显负的新读数. 按<TOOL OFFSET MEAS> 键 来设定刀长偏置.OFFSET (MEM) O91002 N0000 ACTUAL DIAMETER 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. COOLANT ----LENGTH-------RADIUS---TOOL POSITION GEOMETRY WEAR GEOMETRY WEAR FLUTES 1 4 -11.1234 0. 0. 0. 2 2 3 -11.4567 0 0. 0. 0. 2 3 0 0. 0. 0. 0. 2 4 5 6 7 8 9 10 11 0 0 0 0 0 0 0 0 0 0 0 0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. WRITE ADD/F1 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. SET/OFSET 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. TOGGLE 2 2 2 2 2 2 2 2 2 2 2 2

右翼方块输入数字则在 CURNT COMDS 现行指令显 示排屑负载和切削表面速度. 设置 Setting 40 设定 刀具偏置 采用半径或直径 设置 Setting 90 设定 刀具数目(上限为 200)

12 13 14 15 CLNT POS

哈斯操作面板

偏置键——工作坐标偏置共有105 个工作坐标偏置: 按 <PART ZERO SET> 键 来设定工作坐标偏置.OFFSET(JOG) O91002 N0000

WORK ZERO OFFSET G CODE X G 52 0.G 54 G 55 -9.0000 0.

Y 0. 0. 0.

Z 0. 0. 0.

G 56 G 56G 58 G 59 G154 P1 G154 P2 G154 P3 G154 P4 G154 P5 G154 P6 G154 P7 G154 P8

0. 0.0. 0. 0. 0. 0. 0. 0. 0. 0. 0.

0. 0.0. 0. 0. 0. 0. 0. 0. 0. 0. 0. WRITE ADD/F1

0. 0.0. 0. 0. 0. 0. 0. 0. 0. 0. 0. SET/OFSET (G110) (G111) (G112) (G113) (G114) (G115) (G116) (G116) TOGGLE

X POSITION: -9.0000

JOGGING Z AXIS HANDLE .01

哈斯操作面板

现行指令键:现行指令的显示包括 正运行程序的模态指令,现行 位置,负载,水位,刀号,齿轮箱 挡位和主轴工况. 按 <PAGE UP> 或 <PAGE DOWN> 翻页显示: 模态值, 系统时间, 宏程序, 保养, 刀具寿命, 和 刀具负载.COMMAND (MEM) O91002 N00000 MACHINE coo

rdinates – Press / X Y Z 0.0000 in 0.0000 in 0.0000 in D00 PGM F0. CURRENT PROGRAM O91002 ; (Mill Engraving HAAS Logo) ; T1 M06 (Tool #1 Engraving Tool) ; G90 G54 G00 X-0.7355 Y0.4929 ; S5000 M03 ; G00 G43 H01 Z1. M08 ; G01 Z0.03 F100. ; G91 ; G01 Z-0.0337 F7. ; G01 X-0.5687 Y-0.9857 ; G01 X-0.2275 ; G01 X0.1314 Y-0.9857 ; G01 X-0.7835 ; G01 X0.1314 Y0.2275 ; G01 X0.7835 ;

G00 G49 G69 G17 G80 G90 G98 G90 G98 G20 G54 G40 G64 SP LD: X LOAD: Y LOAD: Z LOAD: Surf Spd

H00 ACT F0. M00 PGM S0 M00 PGM S0 ACT S0 CLNT POS 0% 0% 0% 0% 0 fpm Chip Load 0.0000

TOOL 1 IN SPINDLE LOW GEAR STOP

FD 0.0 SP

0

哈斯操作面板

现行指令——运行时间COMMAND (MEM) O91002 N00000

POWER ON TIME

542:21:0CYCLE START TIME

1:23:45FEED CUTTING TIME

按 清除所选显示,但最后 循环不可清除.

0:56:12M30 COUNT #1 1 THIS CYCLE 1:45:67 M30 COUNT #2 36 LAST CYCLE 1:45:56

哈斯操作面板

现行指令——宏程序COMMAND (MEM) O91002 N00000

宏程序 显示现值包括: 1-33 和 100-199, 500-699 和 800-999. 用显态键的 上/下 箭头键 浏览各显页.

MACRO VARIABLES G65 LEVEL = 0 VAR.----VALUE VAR.-----VALUE VAR.----VALUE VAR.----VALUE 1 17 33 2 18 3 19 4 20 5 21 6 22 7 23 8 24 9 25 10 26 11 27 12 28 13 29 14 30 15 31 16 32

哈斯操作面板

现行指令——保养激活高选的保养项目: 按COMMAND (MEM) O91002 N00000MAINTENANCE - to select, ORIGIN to change, <> to adjust Remaining Hours 100 ON-TIME 250 250 1800 10 50 250 50 10 250 ON-TIME ON-TIME ON-TIME ON-TIME CS-TIME ON-TIME CS-TIME ON-TIME ON-TIME COOLANT - Needs replacement

激活的保养项目则显出设置 167—186 所定的时限并随着 机床 工时的递增而递减. 时限到零时: “MAINTENANCE DUE” 的提示会显示,但不会出现报警. 再按

AIR FILTER in control enclosure - replace OIL FILTER - replaced GEARBOX OIL - replaced COOLANT TANK – check level, leakage, oil in coolant WAY LUBE SYSTEM – check level GEARBOX OIL – check level SEALS/WHIPERS missing, torn, leaking - check AIR SUPPLY FILTER – check for water HYDRAULIC OIL – check level

MONITORING STARTED WITH DEFAULT HOURS

一次则停止激活所高选的保养项目 两次则恢复默认原值.

哈斯操作面板

现行指令——自动刀具管理自动刀具管理这功能如果被启用 则软件升级时必须 要作备份保存及 数据恢复.

哈斯操作面板

帮助/计算 键:帮助显页 是本迷你手册. 不同的软件版本会有 不同的格式.COMMANDS (EDIT) O91002 N00000

MAIN HELPThis the Help Function. You are in the (EDIT) operating mode. You were viewing the COMMANDS display.

A program is not running.The servo is opened. There are no operational alarms. Press ALARM to get a general description of alarms. Press F1 to get G-code help. Press F2 to get M-code help Enter a word and press F3 to search for that word. Enter a word and press F4 to search for that word in each section title. Press CANCEL to return to your original screen.

哈斯操作面板

帮助/计算 键—— 铣削和攻丝 (Milling/Tapping)HELP (EDIT) O91002 N00000

M

ILLING/TAPPING 帮助计算出 SFM (表面切削速度/分), RPM (主轴转速/分), Feed Rate (进给量/分), Chip Load (切屑负载) Horsepower (马力). 工料存列21种金属材料 按

CALCULATOR MILLING0.000000000 0.00000 LOAD (MACHINE) 0.0000 in. 0.0000 in. 3.5179 in. CUTTER DIA SURFACE SPEED RPM FLUTES FEED CHIP LOAD MATERIAL TOOL TYPE CUT WIDTH CUT DEPTH . IN . FT/MIN RECOMMENDED 450 TO 650 . . . IN/MIN . IN RECOMMENDED 0.003 TO 0.006

X Y Z

LOW CARBON UNALLOYED STEEL CARBIDE . REQUIRED POWER .

0.0 HP

THREAD RPM FEED

TAPPING . . .

选择相应的工件以算出恰 当的 SFM 和 chip loads.

哈斯操作面板

帮助/计算 键——时间/日期HELP (EDIT) O91002 N00000

按下 <急停> 用 和 高选 时间/日期

REAL-TIME CLOCK Use the up and down cursor arrows to select the date or time.

04-22-2006 12:35:25

用手轮或和 更改 时间/日期.

哈斯操作面板

设置/图形 键:SETTING (EDIT) O91002 N00000

SETTINGS 设置 是车工之可选性操控功能

GENERAL 26 82 1 81 9 77 33 53

KEY IN A NUMBER SERIAL NUMBER: LANGUAGE: 30244 ENGLISH 0 1 INCH DEFAULT FANUC OFF RADIUS ON

7 – 参数锁 23 – 9xxx 宏程序编辑锁 51 – 门锁操控(仅适用于旧版机床) 53 – 机床未回零,手动坐标轴 155 – 下载刀套编排 134/900 – ENET

AUTO POWER OFF TIME: TOOL AT POWER DOWN: DIMENTIONING: SCALE INTEGER F: COORDINATE SYSTEM: JOG W/O ZERO RETURN:

40 TOOL OFFSET MEASURE: 64 T OFS MEAS USES WORK:

109110 111 112

WARMUP TIME IN MIN:WARMUP X DISTANCE: WARMUP Y DISTANCE: WARMUP Z DISTANCE:

00.0000 0.0000 0.0000

哈斯操作面板

按

图形:GRAPHICS (MEM) O91002 N00000 F1:HELP F2:ZOOM F3:POSITION F4:PROG

并 PRESS 或 进行图形缩放 按 <箭头显态键> 进行图形位移 按 <WRITE/ENTER> 确认你的调整 按 <CYCLE START> 进行图形模拟 按 <HOME> 进行图形复原

哈斯操作面板

参数/诊断 键:参数影响机器运行特性 主要为服务部应用 不当使用会损坏机床 部分参数须要解锁码 76 – Low Air Delay 254 – Lathe Spindle Center 257 – Spindle Orient Offset 210 – Mill X-axis TC Offset 211 – Mill Y-axis TC Offset 64 – Mill Z-axis TC OffsetPARAMETERS (MEM) O91002 N00000COMMON SW 1 REV CRANK DISABLE T. C DISABLE G. B POF AT E-STP RIGID TAP REV SPIN ENC REPT RIGID TAP EX ST MD CHG SAFETY CIRC. SP DR LIN AC PH LOSS DET COOLANT SPGT OVER T IS NC SKIP OVERSHT MONINV SP ST SP LOAD MONI (PARAMETER 57) 1 0 1 0 0 0 0 1 0 1 1 1 1 0 0 1 -1692623227 0 0 1 1 1 0 0 0 1 1 0 1 1 0 0 1 SP TEMP MONI ENA ROT & SC ENABLE DNC ENABLE BGEDT ENA GRND FLT M19 SPND ORT ENABLE MACRO INVERT SKIP HANDLE CURSR NEG WORK OFS TRANS OIL QUICK CODE OILER ON/OFF NC OVER VOLT SP MOTOR ENC DOOR STOP SP

哈斯操作面板

诊断DGNOS (MEM) O91002 N00000

DIAGNOSTICS 显现机床功能性数据

哈斯操作面板

报警/信息 键:按ALARMS (MEM) O91002 N00000

显现报警历史 ALARM HISTORY 按

10

2 SERVOS OFF Indicates that the servo motors are off, the tool changer is disabled, the coolant pump is off, and the spindle motor is stopped. Caused by EMERGENCY STOP, motor faults, tool changer problems, or power fail.

浏览最新 500 条报警历史 输入报警号 按ALARM

ALARM VIEWER 显示报警内容

本文来源：https://www.bwwdw.com/article/ywy1.html