Quidway S5700-52C-EI console密码破解及恢复出厂配置

版本信息：

display version

Huawei Versatile Routing Platform Software

VRP (R) software, Version 5.130 (S5700 V200R003C00SPC300) Copyright (C) 2000-2013 HUAWEI TECH CO., LTD

Quidway S5700-52C-EI Routing Switch uptime is 0 week, 0 day, 0 hour, 4 minutes

CX22EMGE 0(Master) : uptime is 0 week, 0 day, 0 hour, 3 minutes 256M bytes DDR Memory 32M bytes FLASH PcbVersion : VER D

Basic BOOTROM Version : 181 Compiled at Jun 29 2013, 10:18:52 CPLD Version : 79

Software Version : VRP (R) Software, Version 5.130 (V200R003C00SPC300) FANCARD I information PcbVersion : FAN VER B PWRCARD I information PcbVersion : PWR VER B PWRCARD II information PcbVersion : PWR VER B

一．启动时按住Ctrl+B进入BootROM模式，BootROM模式默认密码为Admin@huawei.com

BIOS loading ...

Copyright (c) 2008-2013 HUAWEI TECH CO., LTD.

Basic BootROMversion : 181 Compiled at Jun 29 2013, 10:18:52

Press Ctrl+B to enter BootROM menu ... 3 password:

BootROM MENU

1. Boot with default mode 2. Enter serial submenu 3. Enter startup submenu 4. Enter ethernet submenu 5. Enter filesystem submenu 6. Modify BootROM password

7. Clear password for console user

8. Reboot

选择7清空console密码

Enter your choice(1-8): 7

Note: Clear password for console user? Yes or No(Y/N): y

Clear password for console user successfully. Choose \

Note: Do not choose \effect.

BootROM MENU

1. Boot with default mode 2. Enter serial submenu 3. Enter startup submenu 4. Enter ethernet submenu 5. Enter filesystem submenu 6. Modify BootROM password

7. Clear password for console user 8. Reboot

选择1启动默认模式

Enter your choice(1-8): 1

Loading \Decompressing VRP software ................................................ done There is no record in region Exception.

Initializing DEV module ................................................... done

Initializing hardware system .............................................. done Begin to start the system ...

Initializing VFS ..................................... done

Checking startup system-software .......................................... done Reading PAF file .......................................................... done Initializing VOS monitor .............................done CFM initialization advance ........................... done Initializing PAT ..................................... done Initializing HA ......................................done VFS registering to HA ................................done

VRP root begin ...

VRP root end

VRP task initialization begin ... Init the Device Link.............OK

CFG initialization begin .............................done CFM initialization begin .............................done CLI initialization begin .............................done

Registering VRP all link command begin ............... done Creating task begin ... Creating task end

Task initialization begin ... Task initialization end

Cmd registering begin ... Cmd registering end

Recover configuration...OK! Press ENTER to get started.

二．进入console密码配置模式，点击N进入交换机。

An initial password is required for the first login via the console. Continue to set it? [Y/N]:

Error: Please choose 'YES' or 'NO' first before pressing 'Enter'. [Y/N]:n

Warning: There is a risk on the user-interface which you login through. Please change the configuration of the user-interface as soon as possible.

三．重置交换机配置reset saved-configuration选择Y

reset saved-configuration

Sep 8 2016 15:19:50-05:13 Quidway %
EZOP/3/PROCESS_STOP(l)[1]:Easy-operation upgrade process has been stopped. (Reason=There is a configuration file in this device) reset saved-configuration

Warning: The action will delete the saved configuration in the device. The configuration will be erased to reconfigure. Continue? [Y/N]:y Warning: Now clearing the configuration in the device.

Sep 8 2016 15:20:20-05:13 Quidway %
CFM/4/RST_CFG(l)[2]:The user chose Y when deciding whether to reset the saved configuration.

Info: Succeeded in clearing the configuration in the device.

四．重启交换机reboot，选择N。

reboot

Info: The system is now comparing the configuration, please wait.

Warning: The configuration has been modified, and it will be saved to the next startup saved-configuration file . Continue? [Y/N]:n

Info: If want to reboot with saving diagnostic information, input 'N' and then execute 'reboot save diagnostic-information'.

System will reboot! Continue?[Y/N]:y

Sep 8 2016 15:20:54-05:13 Quidway %
CMD/4/REBOOT(l)[3]:The user chose Y when deciding whether to reboot the system. (Task=co0, Ip=**, User=**) Info: System is rebooting, please wait...

Sep 8 2016 15:20:54-05:13 Quidway %
SRM/4/MSTRSCURST(l)[4]:Master SCU is reset.

Sep 8 2016 15:20:54-05:13 Quidway %
SRM/4/RESETREASON(l)[5]:Board reset by VRP command or net manager. System reboot at 15:20:55

本文来源：https://www.bwwdw.com/article/yey.html