Phase2_SIP_Explanation_Submission_Latest

更新时间：2023-08-10 18:46:01 阅读量：工程科技文档下载

说明：文章内容仅供预览，部分内容可能不全。下载后的文档，内容与下面显示的完全一致。下载之前请确认下面内容是否您想要的，是否完整无缺。

phase2是什么意思推荐度：
相关推荐

ipv6 ready 测试文档

IPv6 READY Logo Phase 2Session Initiation Protocol

The explanation of the submissionVersion 2.0.1

IPv6 Forum Converged Test Specification IPv6 Ready Logo CommitteeIPv6 Promotion Council (Japan)

ipv6 ready 测试文档

Modification Record

Version 0.1 Version 1.0.0 Version 1.0.1 Version 1.0.2 Version 1.1.0 Version 2.0.0 Version 2.0.1

Mar. 16, 2007 Apr. 27, 2007 Jul.31, 2007 May.30, 2008 Dec. 12, 2008 Nov. 27, 2009 Jan. 13, 2010

- First release

- Modify the name syntax in section 3.4.5. - Added UNH-IOL members in Author's List. - Added UNH-IOL in copyright. - Changed some explanation.

- Changed "3.3 Submission for conformance test". - Major revision up.

- Some typos were corrected. -Modified for Major Version up - Modified some misspellings. - Modified some incorrect parts.

＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

ipv6 ready 测试文档

Acknowledgement

IPv6 Forum would like to acknowledge the efforts of the following organizations and commentators in the development of this test specification.

- IPv6 Promotion Council

Certification Working Group SIP IPv6 Sub Working Group

- Commentators:

＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

ipv6 ready 测试文档

Table of Contents

1. Overview..........................................................................................................................1 2. Reference Standards.......................................................................................................2 3. About the submission......................................................................................................3 3.1 The list of the submission..........................................................................................3 3.2 Application form.........................................................................................................4 3.3 Submission for conformance test..............................................................................5 3.4 Submission for interoperability test........................................................................6 3.5 Directory structure...................................................................................................8

＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

ipv6 ready 测试文档

1. Overview

This document describes about the required submission to obtain the SIP IPv6 Ready Logo Phase-2.

ipv6 ready 测试文档

2. Reference Standards

(1) RFC3261: SIP: Session Initiation Protocol (/rfc/rfc3261.txt) (2) RFC3264: An Offer/Answer Model with Session Description Protocol

(/rfc/rfc3264.txt)

(3) RFC4566: SDP: Session Description Protocol (/rfc/rfc4566.txt) (4) RFC2617: HTTP Authentication: Basic and Digest Access Authentication

(/rfc/rfc2617.txt)

(5) RFC3665: SIP Basic Call Flow Examples (/rfc/rfc3665.txt) (6) IPv6 Ready Logo Phase 2 Policy (7) SIP IPv6 Test Scope

ipv6 ready 测试文档

3. About the Submission

3.1 The List of the Submission

These files that are shown in Table 3-1 are necessary to submit for obtaining the SIP IPv6 Ready Logo Phase-2.

Table 3-1 The list of the submission

Application Form Conformance test

Configuration file Test tool

Interoperability Test Result Table test

Topology Map Test log

Application Form

Explanation

Application Phase-2.

The HTML log generated when conformance test was executed.

The config.txt set up when conformance test was executed.

conformance test was executed.

The sheet that describes the information of test results in interoperability test.

The sheet that describes the information of interoperability test was executed.

Packet Capture File

The detail of each submission is described in the following subsections. Also, the directory structure is described in subsection 3.5.

interoperability test was executed.

ipv6 ready 测试文档

3.2 Application Form

The application form has been released on IPv6 Ready Logo Web Site (/). The name of application form is as below.

- User Agent: app_form_Phase2_SIP-IPv6_UA.txt - Endpoint: app_form_Phase2_SIP-IPv6_EP.txt.

- Back to Back User Agent: app_form_Phase2_SIP-IPv6_B2BUA.txt. - Proxy Server: app_form_Phase2_SIP-IPv6_PX.txt. - Registrar Server: app_form_Phase2_SIP-IPv6_RG.txt.

For information on how to fill in the application form, see the following: -- Target Information

Fill in name, country, version (version of the product), and explanation of applicant

device. You can just write the explanation of product briefly.

-- Contact Person

Fill in name and e-mail address of applicant.

-- Test Information

Fill in name of OS/Protocol stack that the applicant implementation includes,

the Logo ID of IPv6 Ready Logo Phase-2 for IPv6 Core, the version of the Conformance test / interoperability test document.

Fill in OS/Protocol stack ONLY WHEN the applicant implementation uses that.

-- Test results

Fill in the information of the applicant implementation in the interoperability test. Write vender name and device / product, and version.

There must be two or more different types (different vendors) of equipments.

-- Target Supporting Functions

Select the functions that the applicant implementation supports. All BASIC functions MUST be supported. Select ADVANCED functions if the applicant implementation supports ADVANCED functions and executed the related Conformance test scenario to obtain ADVANCED Logo.

ipv6 ready 测试文档

3.3 Submission for Conformance Test

3.3.1. Conformance Test Log

Submit all HTML logs that have been generated and stored in a configured directory during conformance test. The directory structure is described in subsection 3.5.

3.3.2. Conformance Test Configuration File

Submit the config.txt that has been configured and stored in the same directory as subsection 3.3.1 during conformance test.

3.3.3. Conformance Test Tool

Submit the test tool that was used during conformance test. The directory structure is described in subsection 3.5.

ipv6 ready 测试文档

3.4 Submission for Interoperability Test

3.4.1. Interoperability Test Result Table

Fill in the information of interoperability test results. Fill out the Result Table sheets included in Interoperability test Scenario document and submit it to us (You can use any formats for sending Result Table to us. For example, you can use txt format.). The directory structure for submission is described in subsection 3.5.

For information on how to fill out Result Table sheets, see the following.

-- Result Table

Fill out interoperability test results, as the examples at the end of Result Table

sheets. You can submit it only if all blanks are filled in “PASS”.

3.4.2. Topology Map

Fill in vender name, device name, topology map of UA /EP/B2BUA/PX/RG that is used in interoperability test.

Fill in the information of test topology in interoperability test. Fill out the Topology Map sheets included in Interoperability test Scenario document and submit it to us (You can use any formats for sending Topology Map to us. For example, you can use txt format.). The directory structure for submission is described in subsection 3.5.

For information on how to fill out Topology Map sheets, see the following.

Fill in the configuration of interoperability test as the examples in Topology Map sheets.

-- Topology Map

Fill in Interoperability test scenario Item number, vender name, device name,

topology map of UA / EP / B2BUA / PX / RG that is used in interoperability test.

-- IP address information

Fill in the prefix of each link and IP address / MAC address of UA / EP / B2BUA /

PX / RG / Router. Fill in the address of when you have executed interoperability test.

ipv6 ready 测试文档

3.4.3. Scenario Check Sheet

This sheet is used to check items of “Observable Result” in interoperability scenario when interoperability test is executed. This document does not have to be submitted for the SIP IPv6 Ready Logo Phase-2. It is included in this document.

3.4.4. Packet Capture File

Submit packet capture files (e.g. tcpdump (pcap)) of links in interoperability test. The file name of this packet capture file must be:

[ScenarioName]_[Send Vendor]_[Receive Vendor]_[Link No].cap. Ex.)

In case of executing test of Interop.1.1, Foo Corp is a send vendor, HogeCorp is a receiving vendor, and uses Link1, the file name should be:

Interop.1.1_FooCorp_HogeCorp_Link1.cap

ipv6 ready 测试文档

3.5 Directory Structure

Before submitting, check and organize your all data as following directory structure:

IPv6ReadyLogoForSip_YourVenderName / |

| |----- ct-sip-ipv6[ua|ep|b2bua|px|rg] | |-----Makefile | |-----Makefile.inc

| |----- Interop.1.1_SendVender_RecieveVendor_LinkNo.cap | |----- Interop.1.2_SendVender_RecieveVendor_LinkNo.cap | |----- Interop.1.3_SendVender_RecieveVendor_LinkNo.cap | |-----

|-----TargetVenderName_02/ |-----Topology_Map.txt |-----PacketCaptureFile/

|-----Interop.1.1_SendVender_RecieveVendor_LinkNo.cap |----- Interop.1.2_SendVender_RecieveVendor_LinkNo.cap |----- Interop.1.3_SendVender_RecieveVendor_LinkNo.cap |-----

Put your all data file under “IPv6ReadyLogoForSip_YourVenderName” directory. Also, make and submit a tar.gz archive file instead of uncompressed files themselves.

ipv6 ready 测试文档

IPv6ReadyLogoForSip_YourVenderName / |

|-----app_form_Phase2_SIP-IPv6 |-----ConformanceTestLog/

| |-----

| | | | | | | | |

|-----IOTestLog/ |

| |----- Interop.1.1_SendVender_RecieveVendor_LinkNo.cap | |----- Interop.1.2_SendVender_RecieveVendor_LinkNo.cap | |----- Interop.1.3_SendVender_RecieveVendor_LinkNo.cap | |-----

|----- TargetVenderName_02/ |-----Topology_Map.txt |----- PacketCaptureFile /

|----- Interop.1.1_SendVender_RecieveVendor_LinkNo.cap |----- Interop.1.2_SendVender_RecieveVendor_LinkNo.cap |----- Interop.1.3_SendVender_RecieveVendor_LinkNo.cap |-----

Put your all data file under “IPv6ReadyLogoForSip_YourVenderName” directory. Also, make and submit a tar.gz archive file instead of uncompressed files themselves.

ipv6 ready 测试文档

IPv6ReadyLogoForSip_YourVenderName / |

|-----app_form_Phase2_SIP-IPv6_PX.txt |-----ConformanceTestLog/

| |-----

| | |

|-----IOTestLog/ |

|-----Result_Table.txt

TargetVenderName_03/ |-----

|----- TargetVenderName_AA01/ (If the ADVANCED architecture is executed.) | |----- ... (same as above “TargetVenderName_01”)

|----- TargetVenderName_AA02/ (If the ADVANCED architecture is executed.) | |----- ... (same as above “TargetVenderName_01”)

|----- TargetVenderName_AA03/ (If the ADVANCED architecture is executed.) | |----- ... (same as above “TargetVenderName_01”)

|----- TargetVenderName_AA04/ (If the ADVANCED architecture is executed.) |----- ... (same as above “TargetVenderName_01”)

Put your all data file under “IPv6ReadyLogoForSip_YourVenderName” directory. Also, make and submit a tar.gz archive file instead of uncompressed files themselves.

ipv6 ready 测试文档

APPENDIX

Checksheet of IPv6 Ready Logo Program Phase-2 for SIP IPv6

Interoperability Test Scenario

This sheet is for checking the files that should be submitted for the Interoperability Test. Fill in “OK” or “NG” on the following blanks (check item) to check that the mandatory files are ready to submit.

Category : UA / Endpoint / B2BUA / Proxy Server / Registrar Server Required submission Test Result Table

Reference Chapter 3

Description

End Result

OK or NG

*1 : Document of “The explanation of the submission”.

For UA /

Required submission

Topology Map

Chapter 3 *1 Chapter 3 *1

Network Topology map address, link etc

each link

Check item *2

CmbPtn 11

Packet Capture File

*1 : Document of “The explanation of the submission”. *2 : The number of combinations of the vendor.

*3 : Refer to the next section “Packet Capture File for UA” to see all the Packet Capture Files.

For Endpoint

Required submission

Topology Map

Chapter 3 *1

Check item *2

CmbPtn 1

CmbPtn 2

Network Topology map The information of node address, link etc

Packet Capture File Chapter 3 Save the packet logs on *3 *1 each link

*1 : Document of “The explanation of the submission”. *2 : The number of combinations of the vendor.

*3 : Refer to the next section “Packet Capture File for Endpoint” to see all the Packet Capture Files.

1 CmbPtn : Combination Pattern

ipv6 ready 测试文档

For B2BUA

Required submission Topology Map

Chapter 3 *1

Network Topology map*4node address, link etc

Check item *2

CmbPtn 1

CmbPtn 2

CmbPtn 1

CmbPtn 2

CmbPtn 3CmbPtn 3

CmbPtn 2

CmbPtn 3

CmbPtn 4CmbPtn 2

CmbPtn 3

CmbPtn 4

*6CmbPtn 1

Packet Capture File

*3 Chapter 3 *1 Save the packet logs on *4each link

*6CmbPtn 1

*1 : Document of “The explanation of the submission”. *2 : The number of combinations of the vendor.

*3 : Refer to the next section “Packet Capture File for B2BUA” to see all the Packet Capture Files. *4 : interop.1.1-1.4, interop.2.9-2.12 *5 : interop.3.1-3.3, interop.3.6 *6 : interop.3.4-3.5

For Proxy Server

Required submission Topology Map

Chapter 3 *1

Network Topology map*4node address, link etc

Check item *2

CmbPtn 1

CmbPtn 2

CmbPtn 3CmbPtn 3

CmbPtn 4

CmbPtn 3

CmbPtn 4

CmbPtn 2

CmbPtn 3

Packet Capture File

*3 Chapter 3 *1 Save the packet logs on *4each link

CmbPtn 1

*1 : Document of “The explanation of the submission”. *2 : The number of combinations of the vendor.

ipv6 ready 测试文档

*3 : Refer to the next section “Packet Capture File for Server” to see all the Packet Capture Files. *4 : BASIC architecture

*5 : ADVANCED architecture

For Registrar Server

Required submission Topology Map

Chapter 3 *1

Check item *2

CmbPtn 1

CmbPtn 2

Network Topology map The information of node address, link etc

Packet Capture File Chapter 3 Save the packet logs on *3 *1 each link

*1 : Document of “The explanation of the submission”. *2 : The number of combinations of the vendor.

*3 : Refer to the next section “Packet Capture File for Endpoint” to see all the Packet Capture Files.

ipv6 ready 测试文档

1 Confirmation of Topology Map

Topology Map File for UA

*1 : The number of combinations of the vendor.

ipv6 ready 测试文档

Topology Map File for Endpoint

*1 : The number of combinations of the vendor.

ipv6 ready 测试文档

Topology Map File for B2BUA

Confirm the files that should be submitted under the Interoperability Test.

Fill in “OK” or “NG” on the following blanks (check item) to check that the mandatory files are ready to submit.

For Interop.1.1-1.4, Interop.2.9-2.12 For Interop.3.1-3.6 Node

Vendor Name

CmbPtn 1

CmbPtn 2

Node

CmbPtn 1

Vendor Name

CmbPtn 2

CmbPtn 3

CmbPtn 4

* UA1 : The node that may necessary to execute

Interop.2.9-2.12, Interop.3.1-3.6.

B2BUAServer0* UA1 : The node that is necessary to execute Interop.3.4-3.5*Server0 : The node that isn’t necessary to execute Interop.3-1-3-3, Interop.3-6

*1 : The number of combinations of the vendor.

ipv6 ready 测试文档

Topology Map File for Proxy Server

Confirm the files that should be submitted under the Interoperability Test.

Fill in “OK” or “NG” on the following blanks (check item) to check that the mandatory files are ready to submit.

Node

CmbPtn 1

Vendor Name

CmbPtn 2

CmbPtn 3

CmbPtn 4

*Server1 : The node that isn’t necessary to execute Interop.2.1-2.6, Interop.2.9-2.12