国家紧固件标准 GBT 与汉语、英语对照表

2 GB/T 8-1988 方头螺栓 C 级 Square head bolts--Product grade C

3 GB/T 10-1988 沉头方颈螺栓 Flat countersunk square neck bolts

4 GB/T 11-1988 沉头带榫螺栓 Flat countersunk nib bolts

5 GB/T 12-1988 半圆头方颈螺栓 Cup head square neck bolts

6 GB/T 13-1988 半圆头带榫螺栓 Cup head nib bolts

7 GB/T 15-1988 大半圆头带榫螺栓 Cup head nib bolts with large head

8 GB/T 22-1976 小六角头导颈螺栓 Bolts, small hexagon head with fit neck

9 GB/T 23-1976 小六角头螺杆带孔螺栓 Bolts, small hexagon head with hole through the shank

10 GB/T 24-1976 小六角头螺杆带孔导颈螺栓 Bolts, small hexagon head with fit neck and hole through the shank

11 GB/T 25-1976 小六角头头部带孔螺栓 Bolts, small hexagon head with holes through the head

12 GB/T 26-1976 小六角头头部带孔导颈螺栓 Bolts, small hexagon head with fit neck and holes through the head

13 GB/T 27-1988 六角头铰制孔用螺栓 A 和 B 级 Hexagon fit bolts--Product grade A and B

14 GB/T 28-1988 六角头螺杆带孔铰制孔用螺栓 A 和 B 级 Hexagon fit bolts with Split pin hole on shank--Product grade A and B

15 GB/T 29.1-1988 六角头头部带槽螺栓 A 和 B 级 Hexagon bolts with slot on head--Product grade

A and B

16 GB/T 29.2-1988 十字槽凹穴六角头螺栓 Cross recessed hexagon bolts with indentation

17 GB/T 31.1-1988 六角头螺杆带孔螺栓 A 和 B 级Hexagon bolts with split pin hole on shank--Product grade A and B

18 GB/T 31.2-1988 六角头螺杆带孔螺栓细杆 B 级Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B

19 GB/T 31.3-1988 六角头螺杆带孔螺栓细牙 A 和 B 级 Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B

20 GB/T 32.1-1988 六角头头部带孔螺栓 A 和 B 级 Hexagon bolts with wire holes on head--Product grade A and B 21 GB/T 32.2-1988 六角头头部带孔螺栓细杆 B 级 Hexagon bolts with wire holes on head--Reduced shank--Product grade B

22 GB/T 32.3-1988 六角头头部带孔螺栓细牙 A 和 B 级 Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B

23 GB/T 35-1988 小方头螺栓 B 级 Square head bolts with small head--Product grade B

24 GB/T 37-1988 T 型槽用螺栓 Bolts for T-Slot

26 GB/T 39-1988 方螺母 C 级 Square nuts--Product grade C

27 GB/T 41-1986 1 型六角螺母 C 级 Hexagon nuts--Style 1--Product grad C

28 GB/T 56-1988 六角厚螺母 Hexagon thick nuts

30 GB/T 62-1988 蝶形螺母 Wing nuts

31 GB/T 63-1988 环形螺母 Lifting nuts

32 GB/T 65-1985 开槽圆柱头螺钉 Slotted cheese head screws

33 GB/T 67-1985 开槽盘头螺钉 Slotted pan head screws

34 GB/T 68-1985 开槽沉头螺钉 Slotted countersunk head screws

35 GB/T 69-1985 开槽半沉头螺钉 Slotted raised countersunk head screws

36 GB/T 70-1985 内六角圆柱头螺钉 Hexagon socket cap head screws

37 GB/T 71-1985 开槽锥端紧定螺钉 Slotted set screws with cone point

38 GB/T 72-1988 开槽锥端定位螺钉 Slotted set screws with cone point

39 GB/T 73-1985 开槽平端紧定螺钉 Slotted set screws with flat point

40 GB/T 74-1985 开槽凹端紧定螺钉 Slotted set screws with cup point

41 GB/T 75-1985 开槽长圆柱端紧定螺钉 Slotted set screws withlong dog point

42 GB/T 77-1985 内六角平端紧定螺钉 Hexagon socket set screws with flat point

43 GB/T 78-1985 内六角锥端紧定螺钉 Hexagon socket set screws with cone point

44 GB/T 79-1985 内六角圆柱端紧定螺钉 Hexagon socket set screws with dog point

45 GB/T 80-1985 内六角凹端紧定螺钉 Hexagon socket set screws with cup point

46 GB/T 83-1988 方头长圆柱球面端紧定螺钉 Square set screws with long dog point and rounded end

47 GB/T 84-1988 方头凹端紧定螺钉 Square set screws with cup point

48 GB/T 85-1988 方头长圆柱端紧定螺钉 Square set screws with long dog point

49 GB/T 86-1988 方头短圆柱锥端紧定螺钉 Square set screws with short dog point and cone end

52 GB/T 91-1986 开口销 Split pins

53 GB/T 93-1987 标准型弹簧垫圈 Single coil spring lock washers--Normal type

57 GB/T 95-1985 平垫圈 -C 级 Plain washers--Product grade C

90 GB/T 794-1993 加强半圆头方颈螺栓 Strengthened cap head square neck bolts

91 GB/T 798-1988 活节螺栓 Eye bolts

92 GB/T 799-1988 地脚螺栓 Eyelet bolts

93 GB/T 800-1988 沉头双榫螺栓 Flat countersunk double nib bolts

94 GB/T 802-1988 组合式盖形螺母 Acorn nuts

95 GB/T 804-1988 球面六角螺母 Hexagon nuts with raised face

96 GB/T 805-1988 扣紧螺母 Tight nuts

97 GB/T 806-1988 滚花高螺母 Knurled nut with collar

98 GB/T 807-1988 滚花薄螺母 Knurled nuts

99 GB/T 808-1988 小六角特扁细牙螺母 Small hexagon thin nuts-Fine pitch thread

100 GB/T 809-1988 嵌装圆螺母 Insert round nuts

101 GB/T 810-1988 小圆螺母 Small round nuts

102 GB/T 812-1988 圆螺母 Round nuts

103 GB/T 815-1988 端面带孔圆螺母 Round nuts with drilled holes in one face

104 GB/T 816-1988 侧面带孔圆螺母 Round nuts with set pin holes in side

105 GB/T 817-1988 带槽圆螺母 Slotted round nuts

106 GB/T 818-1985 十字槽盘头螺钉 Cross recessed pan head screws

107 GB/T 819-1985 十字槽沉头螺钉 Cross recessed countersunk head screws

108 GB/T 820-1985 十字槽半沉头螺钉 Cross recessed raised countersunk head screws

109 GB/T 821-1988 方头倒角端紧定螺钉 Square set screws with chamfered end

110 GB/T 822-1988 十字槽圆柱头螺钉 Cross recessed cheese head serews

111 GB/T 823-1988 十字槽小盘头螺钉 Cross recessed small pan head screws

112 GB/T 824-1976 圆柱头内花键螺钉 Screws,fluted socket head

113 GB/T 825-1988 吊环螺钉 Eyebolts

114 GB/T 827-1986 标牌铆钉 Rivets for name plate

115 GB/T 828-1988 开槽盘头定位螺钉 Slotted pan head set setscrews with dog point

116 GB/T 829-1988 开槽圆柱端定位螺钉 Slotted setscrews with dog point

117 GB/T 830-1988 开槽圆柱头轴位螺钉 Slotted cheese head screws with shoulder

118 GB/T 831-1988 开槽无头轴位螺钉 Slotted shoulder screws

119 GB/T 832-1988 开槽带孔球面圆柱头螺钉 Slotted capstan screws

120 GB/T 833-1988 开槽大圆柱头螺钉 Slotted large cheese head screws

121 GB/T 834-1988 滚花高头螺钉 Knurled thumb screws

122 GB/T 835-1988 滚花平头螺钉 Knurled screws

123 GB/T 836-1988 滚花小头螺钉 Knurled screws with small head

124 GB/T 837-1988 开槽盘头不脱出螺钉 Slotted pan head screws with waisted shank

125 GB/T 838-1988 六角头不脱出螺钉 Hexagon screws with waisted shank

126 GB/T 839-1988 滚花头不脱出螺钉 Knurled thumb screws with waisted shank

127 GB/T 840-1988 塑料滚花头螺钉 Plastic diamond knurlhead screws

128 GB/T 845-1985 十字槽盘头自攻螺钉 Cross recessed pan head tapping screws

129 GB/T 846-1985 十字槽沉头自攻螺钉 Cross recessed countersunk head tapping screws

130 GB/T 847-1985 十字槽半沉头自攻螺钉 Cross recessed raised countersunk head tapping screws 131 GB/T 848-1985 小垫圈 --A 级 Plain washers--Small series--Product grade A

132 GB/T 849-1988 球面垫圈 Weshers with ball face

133 GB/T 850-1988 锥面垫圈 Washers with cone face

134 GB/T 851-1988 开口垫圈 Washers with split

135 GB/T 852-1988 工字钢用方斜垫圈 Square taper washers for I section

136 GB/T 853-1988 槽钢用方斜垫圈 Square taper washers for slot section

137 GB/T 854-1988 单耳止动垫圈 Tab washers with long tab

138 GB/T 855-1988 双耳止动垫圈 Tab washers with long tab and wing

139 GB/T 856-1988 外舌止动垫圈 External tab washers

140 GB/T 858-1988 圆螺母用止动垫圈 Tab washers for round nut

141 GB/T 859-1987 轻型弹簧垫圈 Single coil spring lock washers,Light type

142 GB/T 860-1987 鞍形弹性垫圈 Curved spring washers

143 GB/T 861.1-1987 内齿锁紧垫圈 Lock washers internal teeth

144 GB/T 861.2-1987 内锯齿锁紧垫圈 Serrated lock washers internal teeth

145 GB/T 862.1-1987 外齿锁紧垫圈 Lock washers external teeth

146 GB/T 862.2-1987 外锯齿锁紧垫圈 Serrated lock washers external teeth

147 GB/T 863.1-1986 半圆头铆钉 ( 粗制 ) Round head rivets--Black

148 GB/T 863.2-1986 小半圆头铆钉 ( 粗制 ) Round head rivets with small head--Black

149 GB/T 864-1986 平锥头铆钉 ( 粗制 ) Cone head rivets--Black

150 GB/T 865-1986 沉头铆钉 ( 粗制 ) Countersunk head rivets-Black

151 GB/T 866-1986 半沉头铆钉 ( 粗制 ) Oval countersunk head rivets--Black

152 GB/T 867-1986 半圆头铆钉 Round head rivets

153 GB/T 868-1986 平锥头铆钉 Cone head rivets

154 GB/T 869-1986 沉头铆钉 Countersunk head rivets

155 GB/T 870-1986 半沉头铆钉 Oval countersunk head rivets

156 GB/T 871-1986 扁圆头铆钉 Flat round head rivets

157 GB/T 872-1986 扁平头铆钉 Thin head rivets

158 GB/T 873-1986 扁圆头半空心铆钉 Oval head semi-tubular rivets

159 GB/T 874-1986 120° 沉头半空心铆钉 120 degree countersunk head semi-tubular rivets

160 GB/T 875-1986 偏平头半空心铆钉 Thin head semi-tubular rivet

161 GB/T 876-1986 空心铆钉 Tubular rivets

162 GB/T 877-1986 开尾圆锥销 Taper pins with split

163 GB/T 878-1986 螺纹圆柱销 Parallel pins with external thread

164 GB/T 879-1986 弹性圆柱销 Spring-type straight pins—Slotted

165 GB/T 880-1986 带孔销 Pins with split pin hole

166 GB/T 881-1986 螺尾锥销 Taper pins with external thread

167 GB/T 882-1986 销轴 Clevis pins with head

168 GB/T 883-1986 锥销锁紧挡圈 Lock rings with cone pin

169 GB/T 884-1986 螺钉锁紧挡圈 Lock ring with screw

170 GB/T 885-1986 带锁圈的螺钉锁紧挡圈 Lock rings with screw and circlip

171 GB/T 886-1986 轴肩挡圈 Rings for shoulder

172 GB/T 889-1986 1 型非金属嵌件六角锁紧螺母Prevailing torque type hexagon nuts (with non-metallic insert),style 1

173 GB/T 891-1986 螺钉紧固轴端挡圈 Lock rings at the end of shaft with screw

174 GB/T 892-1986 螺栓紧固轴端挡圈 Lock rings at the end of shaft with bolt

175 GB/T 893.1-1986 孔用弹性挡圈 --A 型 Circlips for holes--Type A

176 GB/T 893.2-1986 孔用弹性挡圈 --B 型 Circlips for hole--Type B

177 GB/T 894.1-1986 轴用弹性挡圈 --A 型 Circlips for shaft--Type A

178 GB/T 894.2-1986 轴用弹性挡圈 --B 型 Circlips for shaft--Type B

179 GB/T 895.1-1986 孔用钢丝挡圈 Roundwire snap rings for hole

180 GB/T 895.2-1986 轴用钢丝挡圈 Roundwire snap rings for shaft

181 GB/T 896-1986 开口挡圈 "E" rings

182 GB/T 897-1988 双头螺柱 bm=1d Double end studs--bm=1d

183 GB/T 898-1988 双头螺柱 bm=1.25d Double end studs bm=1.25d

184 GB/T 899-1988 双头螺柱 bm=1.5d Double end studs bm=1.5d

185 GB/T 900-1988 双头螺柱 bm=2d Double end studs bm=2d

186 GB/T 901-1988 等长双头螺柱 B 级 Double end studs (clamping type)--Product grade B

187 GB/T 902.1-1989 手工焊用焊接螺柱 Weld studs for manual welding

188 GB/T 902.2-1989 机动弧焊用焊接螺柱 Weld studs for arc welding

189 GB/T 902.3-1989 储能焊用焊接螺柱 Weld studs for capacitor discharge welding

190 GB/T 921-1986 钢丝锁圈 Round wire circlips

191 GB/T 922-1986 木螺钉技术条件 Specifications for wood screws

192 GB/T 923-1988 盖形螺母 Acorn nuts

193 GB/T 925-1988 轻型六角自锁螺母 Self-locking nuts,hexagon light

194 GB/T 927-1988 球面六角自锁螺母 Self-locking nuts,hexagon sphere

195 GB/T 929-1988 单耳托板自锁螺母 Self-locking nuts,singlelug, anchor

196 GB/T 930-1988 双耳托板自锁螺母 Self-locking nuts,twolug, anchor

197 GB/T 931-1988 角形托板自锁螺母 Self-locking nuts,angle, anchor

198 GB/T 932-1988 气密单耳托板自锁螺母 Self-locking nuts,singlelug, anchor, sealing,

199 GB/T 933-1988 气密双耳托板自锁螺母 Self-locking nuts,twolug, anchor, sealing

200 GB/T 937-1988 成组游动托板自锁螺母 Self-locking nuts, anchor, floating,Gang channel

201 GB/T 938-1988 游动自锁螺母 Self-locking nuts, floating

202 GB/T 939-1988 单耳托板自锁螺母保护罩 Boots for self-locking nuts, singlelug, anchor

203 GB/T 940-1988 双耳托板自锁螺母保护罩 Boots for self-locking nuts,twolug, anchor

204 GB/T 941-1988 角形托板自锁螺母保护罩 Boots for self-locking nuts,angle, anchor

205 GB/T 943-1988 自锁螺母技术条件 Procurement specification for self-locking nuts

206 GB/T 945-1976 十字槽球面中柱头螺钉 Screws,cross recessed,thin raised cheese head

207 GB/T 946-1988 开槽球面圆柱头轴位螺钉 Slotted raised cheese head with shoulder

208 GB/T 947-1988 开槽球面大圆柱头螺钉 Slotted large raised cheese head screws

209 GB/T 948-1988 开槽沉头不脱出螺钉 Slotted countersunk head screws with waisted shank

210 GB/T 949-1988 开槽半沉头不脱出螺钉 Slotted raised countersunk head screws with waisted shank 211 GB/T 950-1986 十字槽圆头木螺钉 Cross recessed round head wood screws

212 GB/T 951-1986 十字槽沉头木螺钉 Cross recessed countersunk head wood screws

213 GB/T 952-1986 十字槽半沉头木螺钉 Cross recessed raised countersunk head wood screws

214 GB/T 953-1988 等长双头螺柱 C 级 Double end studs (clamping type)--Product grade C

215 GB/T 954-1986 120° 沉头铆钉120°degree countersunk head rivets

216 GB/T 955-1987 波形弹性垫圈 Wave spring washers

217 GB/T 956.1-1987 锥形锁紧垫圈 Countersunk external toothed lock washers

218 GB/T 956.2-1987 锥形锯齿锁紧垫圈 Countersunk serrated external toothed lock washers

219 GB/T 959.1-1986 挡圈技术条件 -- 弹性挡圈 Specifications for ring—Circlips

220 GB/T 959.2-1986 挡圈技术条件 -- 钢丝挡圈 Specifications for ring—Round wire snap rings 221 GB/T 959.3-1986 挡圈技术条件 -- 切制挡圈 Specifications for ring—Cutting rings

222 GB/T 960-1986 夹紧挡圈 Grip rings

223 GB/T 961-1988 单耳托板自锁螺母垫片 Spacers for self-locking nuts,singlelug, anchor

224 GB/T 962-1988 双耳托板自锁螺母垫片 Spacers for self-locking nuts,twolug, anchor

225 GB/T 963-1988 角形托板自锁螺母垫片 Spacers for self-locking nuts,angle, anchor

226 GB/T 973-1976 十字槽扁圆头螺钉 Screws,cross recessed,oval head

227 GB/T 974-1976 十字槽120° 半沉头螺钉Screws,cross recessed,120°raised countersunk head 228 GB/T 975-1986 管状铆钉 Pipe type rivets

229 GB/T 1007-1976 小六角较扁螺母 Small hexagon medium thin nuts

230 GB/T 1009-1978 螺母专用技术条件 Specified specifications for nuts

231 GB/T 1011-1986 大扁圆头铆钉 Truss head rivets

232 GB/T 1012-1986 120° 半沉头铆钉120°degree oval countersunk rivets

233 GB/T 1013-1986 平锥头半空心铆钉 Cone head semi-tubuler rivets

234 GB/T 1014-1986 大扁圆头半空心铆钉 Truss head semi-tubuar rivets

235 GB/T 1015-1986 沉头半空心铆钉 Countersunk head semi-tublar rivets

236 GB/T 1016-1986 无头铆钉 Headless rivets

237 GB/T 1017-1978 铆钉专用技术条件 Specified specifications for rivets

238 GB/T 1021-1976 角形垂直单耳止动垫圈 Lock washers with angular upturn tab perpendicular to the lug

239 GB/T 1022-1976 角形单耳止动垫圈 Lock washers with angular upturn tab in line to the lug 240 GB/T 1023-1976 角形垂直外舌止动垫圈 Lock washers with angular upturn tab perpendicular to the external tab

241 GB/T 1024-1976 角形外舌止动垫圈 Lock washers with angular upturn tab in line to the external tab

242 GB/T 1030-1988 内球面垫圈 Inner sphere washers

243 GB/T 1047-1995 管道元件的公称通径 Nominal size for pipe components

244 GB/T 1048-1990 管道元件公称压力 Nominal pressure for pipe components

245 GB/T 1095-1979 平键键和键槽的剖面尺寸 Parallel keys--Dimensions of cross sections and keyways

246 GB/T 1096-1979 普通平键型式尺寸 Plain parallel keys--Types and dimensions

247 GB/T 1097-1979 导向平键型式尺寸 Feather keys--Types and dimensions

248 GB/T 1098-1979 半圆键键和键槽的剖面尺寸 Semi-circular (Woodruff) keys--Dimensions of cross sections and keyways

249 GB/T 1099-1979 半圆键型式尺寸 Woodruff keys--Types and dimensions

250 GB/T 1144-1987 矩形花键尺寸、公差和检验 Straight-sided spline—Dimensions tolerances and verification

251 GB/T 1168-1976 螺柱技术条件 Studs--Technical requirements

252 GB/T 1228-1991 钢结构用高强度大六角头螺栓 High strength bolts with large hexagon head for steel structures 253 GB/T 1229-1991 钢结构用高强度大六角螺母 High strength large hexagon nuts for steel structures

254 GB/T 1230-1991 钢结构用高强度垫圈 High strength plain washers for steel structures

255 GB/T 1231-1991 钢结构用高强度大六角头螺拴、大六角螺母、垫圈技术条件 Specifications of high strength bolts with large hexa-gon head, large hexagon nuts, plain washers for steel structures 256 GB/T 1237-1988 紧固件的标记方法 Designation system for fasteners

257 GB/T 1337-1988 六角自锁螺母 Self-locking nuts,hexagon

258 GB/T 1338-1988 小六角扁自锁螺母 Self-locking nuts,reduced hexagon oblate

259 GB/T 1339-1988 小六角自锁螺母 Self-locking nuts,reduced hexagon

260 GB/T 1340-1988 成组游动托板自锁螺母支架 Supports for self-locking nuts,anchor floating,Gang channel

261 GB/T 1356-1988 淅开线圆柱齿轮基本齿廓 Basic rack tooth profile of involute cylindrical gears

262 GB/T 1357-1987 渐开线圆柱齿轮模数 Modules of involute cyindrical gears

263 GB/T 1563-1979 楔键键和键槽的剖面尺寸 Taper keys--Cross section dimensions of keys and keyways

264 GB/T 1564-1979 普通楔键型式尺寸 Taper keys for general use--Types and dimensions

265 GB/T 1565-1979 钩头楔键型式尺寸 Gib-head taper keys--Types and dimensions

266 GB/T 1566-1979 薄型平键键和键槽的剖面尺寸 Thin flat keys--Cross section dimensions and keyways

267 GB/T 1567-1979 薄型平键型式尺寸 Thin flat keys--Types and dimensions

277 GB/T 2672-1986 内六角花形盘头螺钉 Hexagon lobular socket pan head screws

278 GB/T 2673-1986 内六角花形沉头螺钉 Hexagon lobular socket countersunk head screws

279 GB/T 2674-1986 内六角花形半沉头螺钉 Hexagon lobular socket raised countersunk head screws 450 GB/T 5281-1985 内六角圆柱头轴肩螺钉 Hexagon socket head shoulder screws

451 GB/T 5282-1985 开槽盘头自攻螺钉 Slotted pan head tapping screws

452 GB/T 5283-1985 开槽沉头自攻螺钉 Slotted countersunk head tapping screws

453 GB/T 5284-1985 开槽半沉头自攻螺钉 Slotted raised countersunk head tapping screws

454 GB/T 5285-1985 六角头自攻螺钉 Hexagon head tapping screws

455 GB/T 5286-1985 螺栓、螺钉和螺母用平垫圈总方案Plain washers for bolts,screws and

nuts--General plan

456 GB/T 5287-1985 特大垫圈 C 级 Plain washers--Extra large series--Product grade C

510 GB/T 5780-1986 六角头螺栓 --C 级 Hexagon head bolts—Product grade C

511 GB/T 5781-1986 六角头螺栓 -- 全螺纹 --C 级 Hexagon head bolts—Full thread—Product grade C

512 GB/T 5782-1986 六角头螺栓 --A 和 B 级 Hexagon head bolts—Product grades A and B

513 GB/T 5783-1986 六角头螺栓 -- 全螺纹 A 和 B 级 Hexagon head bolts—Full thread—Product grades A and B

514 GB/T 5784-1986 六角头螺栓 -- 细杆 B 级 Hexagon head bolts—Reduced shank—Product grade B 515 GB/T 5785-1986 六角头螺栓-- 细牙--A 和 B 级Hexagon head bolts—Fine pitch thread—Product grades A and B

516 GB/T 5786-1986 六角头螺栓细牙全螺纹 A 和 B 级 Hexagon head bolts—Fine pitch thread—Full thread—Product grades A and B

517 GB/T 5787-1986 六角法兰面螺栓 --B 级 Hexagon flange bolts—Product grade B

518 GB/T 5788-1986 六角法兰面螺栓 -- 细杆 --B 级 Hexagon flange bolts--Reduced shank--Product grade B

519 GB/T 5789-1986 六角法兰面螺栓-- 加大系列--B 级Hexagon flange bolts—Heavy series—Product grade B

520 GB/T 5790-1986 六角法兰面螺栓 -- 加大系列 -- 细杆 --B 级 Hexagon flange bolts—Heavg eries--Product grade B

532 GB/T 6170-1986 1 型六角螺母 A 和 B 级 Hexagon nuts, style 1--Product grades A and B

533 GB/T 6171-1986 1 型六角螺母细牙 A 和 B 级 Hexagon nuts, style 1--Fine pitch thread--Product gra des A and B

534 GB/T 6172-1986 六角薄螺母 A 和 B 级倒角Hexagon thin nuts--Product grades A and B--Chamfered

535 GB/T 6173-1986 六角薄螺母细牙 A 和 B 级 Hexagon thin nuts--Fine pitch thread--Product grades A and B

536 GB/T 6174-1986 六角薄螺母 B 级无倒角 Hexagon thin nuts--Product grade B--Unchamfered 537 GB/T 6175-1986 2 型六角螺母 A 和 B 级 Hexagon nuts, style 2--Product grades A and B

538 GB/T 6176-1986 2 型六角螺母细牙 A 和 B 级 Hexagon nuts, style 2--Fine pitch thread--Product grades A and B

539 GB/T 6177-1986 六角法兰面螺母 A 级 Hexagon nuts with flange--Product grade A

540 GB/T 6178-1986 1 型六角开槽螺母 A 和 B 级 Hexagon slotted and castle nuts, style 1--Product grades A and B

541 GB/T 6179-1986 1 型六角开槽螺母 C 级 Hexagon slotted nuts, style 1--Product grade C

542 GB/T 6180-1986 2 型六角开槽螺母 A 和 B 级 Hexagon slotted and castle nuts,style 2--Product grades A and B

543 GB/T 6181-1986 六角开槽薄螺母 A 和 B 级 Hexagon thin slotted nuts--Product grades A and B 544 GB/T 6182-1986 2 型非金属嵌件六角锁紧螺母Prevailing torque type hexagon nuts (with non-metallic insert), style 2

545 GB/T 6183-1986 非金属嵌件六角法兰面锁紧螺母 Prevailing torque type hexagon nuts with flange (with non-metallic insert)

546 GB/T 6184-1986 1 型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts, style 1

547 GB/T 6185-1986 2 型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts, style 2--Property classes

548 GB/T 6186-1986 2 型全金属六角锁紧螺母 9 级 Prevailing torque type all-metal hexagon nuts, style 2--Property class 9

549 GB/T 6187-1986 全金属六角法兰面锁紧螺母 Prevailing torque type all-metal hexagon nuts with flange

550 GB/T 6188-1986 紧固件用六角花形 T 型 Hexagon lobular for fasteners--Type T

551 GB/T 6189-1986 紧固件用六角花形 E 型 Hexagon lobular for fasteners--Type E

552 GB/T 6190-1986 内六角花形圆柱头螺钉 4.8 级 Hexagon lobular socket head cap screws--Property class 4.8

553 GB/T 6191-1986 内六角花形圆柱头螺钉 8.8 级 Hexagon lobular socket head cap screws--Property class 8.8

562 GB/T 6560-1986 十字槽盘头自攻锁紧螺钉 Cross recessed pan head thread forming screws

563 GB/T 6561-1986 十字槽沉头自攻锁紧螺钉 Cross recessed countersunk head thread forming screws 564 GB/T 6562-1986 十字槽半沉头自攻锁紧螺钉 Cross recessed raised countersunk head thread forming screws

565 GB/T 6563-1986 六角头自攻锁紧螺钉 Hexagon head thread forming screws

566 GB/T 6564-1986 内六角花形圆柱头自攻锁紧螺钉 Hexagon lobular socket thread forming screws 573 GB/T 7244-1987 重型弹簧垫圈 Single coil spring lock washers, Heavy type

574 GB/T 7245-1987 鞍形弹簧垫圈 Curved single coil spring lock washers

575 GB/T 7246-1987 波形弹簧垫圈 Wave single coil spring lock washers

587 GB/T 8262-1987 圆头椭圆颈螺栓 Bolts,round head with oval neck

594 GB/T 9074.1-1988 十字槽盘头螺钉和平垫圈组合件 Cross recessed pan head screw and plain washer assemblies

595 GB/T 9074.2-1988 十字槽盘头螺钉和外锯齿锁紧垫圈组合件 Cross recessed pan head screw and serrated lock washer external teeth assemblies

596 GB/T 9074.3-1988 十字槽盘头螺钉和弹簧垫圈组合件 Cross recessed pan head screw and single coil spring lock washer assemblies

597 GB/T 9074.4-1988 十字槽盘头螺钉, 弹簧垫圈和平垫圈组合件Cross recessed pan head screw,single coil spring lock washer and plain washer assemblies

598 GB/T 9074.5-1988 十字槽小盘头螺钉和平垫圈组合件 Cross recessed small pan head screw and small plain washer assemblies

599 GB/T 9074.6-1988 十字槽小盘头螺钉和大垫圈组合件 Cress recessed small pan head serew and big plain washer assemblies

600 GB/T 9074.7-1988 十字槽小盘头螺钉和弹簧垫圈组合件 Cross recessed small pan head screw and single coil spring lock washer assemblies

601 GB/T 9074.8-1988 十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件 Cross recessed small pan head screw,single coil spring lock washer and plain washer assemblies

602 GB/T 9074.9-1988 十字槽沉头螺钉和锥形锁紧垫圈组合件 Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies

603 GB/T 9074.10-1988 十字槽半沉头螺钉和锥形锁紧垫圈组合件 Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies

604 GB/T 9074.11-1988 十字槽凹穴六角头螺栓和平垫圈组合件 Cross recessed hexagon bolt with indentation and plain washer assemblies

605 GB/T 9074.12-1988 十字槽凹穴六角头螺栓和弹簧垫圈组合件 Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies

606 GB/T 9074.13-1988 十字槽凹穴六角头螺栓 , 弹簧垫圈和平垫圈组合件 Cross recessed hexagon bolt with indentation, single coil lock washer and plain washer assemblies

607 GB/T 9074.14-1988 六角头螺栓和平垫圈组合件 Hexagon head bolt and plain washer assemblies 608 GB/T 9074.15-1988 六角头螺栓和弹簧垫圈组合件 Hexagon head bolt and single coil spring lock washer assemblies

609 GB/T 9074.16-1988 六角头螺栓和外锯齿锁紧垫圈组合件 Hexagon head bolt and serrated lock washer external teeth assemblies

610 GB/T 9074.17-1988 六角头螺栓 , 弹簧垫圈和平垫圈组合件 Hexagon head bolt, single coil spring lock washer and plain washer assemblies

611 GB/T 9074.18-1988 十字槽盘头自攻螺钉和平垫圈组合件 Cross recessed pan head tapping screw and plain washer assemblies

612 GB/T 9074.19-1988 十字槽盘头自攻螺钉和大垫圈组合件 Cross recessed pan head tapping screw and large plain washer assemblies

613 GB/T 9074.20-1988 十字槽凹穴六角头自攻螺钉和平垫圈组合件 Cross recessed hexagon head tapping sorew with indentation and plain washer assemblies

614 GB/T 9074.21-1988 十字槽凹穴六角头自攻螺钉和大垫圈组合件 Cross recessed hexagon head tapping screw with indentation and large plain washer assemblies

615 GB/T 9074.22-1988 六角头自攻螺钉和平垫圈组合件 Hexagon head tapping screw and plain washer assemblies

616 GB/T 9074.23-1988 六角头自攻螺钉和大垫圈组合件 Hexagon head tapping screw and big washer assemblies

617 GB/T 9074.24-1988 组合件用平垫圈 Plain washer for assembly

618 GB/T 9074.25-1988 组合件用大垫圈 Big plain washer for assembly

619 GB/T 9074.26-1988 组合件用弹簧垫圈 Single coil spring lock washer for assembly

620 GB/T 9074.27-1988 组合件用外锯齿锁紧垫圈 Serrated lock washer external teeth for assembly 621 GB/T 9074.28-1988 组合件用锥形锁紧垫圈 Countersunk external toothed lock washer for assembly 622 GB/T 9074.29-1988 自攻螺钉组合件用平垫圈 Samll wasner for tapping screw assembly

623 GB/T 9074.30-1988 自攻螺钉组合件用大垫圈 Big washer for tapping screw assembly

808 GB/T 9456-1988 十字槽凹穴六角自攻螺钉 Cross recessed hexagon head tapping screws with indentation

809 GB/T 9457-1988 1 型六角开槽螺母细牙 A 和 B 级 Hexagon slotted and castle nuts, style l--Fine pitch thread--Product grades A and B

810 GB/T 9458-1988 2 型六角开槽螺母细牙 A 和 B 级 Hexagon slotted and castle nuts, style 2--Fine pitch thread--Product grades A and B

811 GB/T 9459-1988 六角开槽薄螺母细牙 A 和 B 级Hexagon thin slotted nuts--Fine pitch thread--Product grades A and B

840 GB/T 10432-1989 无头焊钉 Headless studs for stud welding

841 GB/T 10433-1989 圆柱头焊钉 Cheese head studs for stud welding

900 GB/T 12615-1990 封闭型扁圆头抽芯铆钉 Mushroom head break mandrel closed end blind rivets 900 GB/T 12615-1990 封闭型扁圆头抽芯铆钉 Mushroom head break mandrel closed end blind rivets 922 GB/T 13680-1992 焊接方螺母 Square weld nuts

923 GB/T 13681-1992 焊接六角螺母 Hexagon weld nuts

927 GB/T 13806.1-1992 精密机械用紧固件十字槽螺钉 Fasteners for fine mechanics--Cross recessed screws

928 GB/T 13806.2-1992 精密机械用紧固件十字槽自攻螺钉刮削端Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point

937 GB/T 14210-1993 墙板自攻螺钉 Dry wall screws

972 GB/T 15855.1-1995 扁圆头击芯铆钉 Flat round head drive rivets

973 GB/T 15855.2-1995 沉头击芯铆钉 Countersunk head drive rivets

974 GB/T 15855.3-1995 击芯铆钉技术条件 Specifications for drive rivets

975 GB/T 15856.1-1995 十字槽盘头自钻自攻螺钉 Cross recessed pan head self-drilling tapping screws

976 GB/T 15856.2-1995 十字槽沉头自钻自攻螺钉 Cross recessed countersunk head self-drilling tapping screws

977 GB/T 15856.3-1995 十字槽半沉头自钻自攻螺钉Cross recessed raised countersunk head self-drilling tapping screws

978 GB/T 15856.4-1995 六角法兰面自钻自攻螺钉 Hexagon flange head self-drilling tapping screws 991 GB/T 16824.1-1997 六角凸缘自攻螺钉 Hexagon head tapping screws with collar

992 GB/T 16824.2-1997 六角法兰面自攻螺钉 Hexagon flange head tapping screws

1005 GB/T 96-1985 大垫圈 -A 和 C 级 Plain washers--Large series--Product grades A and C

1006 GB/T 97.1-1985 平垫圈 -A 级 Plain washers--Normal series--Product grade A

1007 GB/T 97.2-1985 平垫圈倒角型 -A 级 Plain washers--Chamfered--Normal series--Product grade A

1008 GB/T 98-1988 止动垫圈技术条件 Specification for tab washer

1009 GB/T 99-1986 开槽圆头木螺钉 Slotted round head wood screws

1010 GB/T 100-1986 开槽沉头木螺钉 Slotted countersink head wood screws

1011 GB/T 101-1986 开槽半沉头木螺钉 Slotted raised countersunk head wood screws

1012 GB/T 102-1986 六角头木螺钉 Hexagon head wood screws

1013 GB/T 109-1986 平头铆钉 Flat head rivets

1014 GB/T 116-1986 铆钉技术条件 Specifications for rivet

1015 GB/T 117-1986 圆锥销 Taper pins

1016 GB/T 118-1986 内螺纹圆锥销 Taper pins with internal thread

1017 GB/T 119-1986 圆柱销 Parallel pins

1018 GB/T 120-1986 内螺纹圆柱销 Parallel pins with internal thread

1005 GB/T 96-1985 大垫圈 -A 和 C 级 Plain washers--Large series--Product grades A and C

1006 GB/T 97.1-1985 平垫圈 -A 级 Plain washers--Normal series--Product grade A

1007 GB/T 97.2-1985 平垫圈倒角型 -A 级 Plain washers--Chamfered--Normal series--Product grade A

1008 GB/T 98-1988 止动垫圈技术条件 Specification for tab washer

1009 GB/T 99-1986 开槽圆头木螺钉 Slotted round head wood screws

1010 GB/T 100-1986 开槽沉头木螺钉 Slotted countersink head wood screws

1011 GB/T 101-1986 开槽半沉头木螺钉 Slotted raised countersunk head wood screws

1012 GB/T 102-1986 六角头木螺钉 Hexagon head wood screws

1013 GB/T 109-1986 平头铆钉 Flat head rivets

1014 GB/T 116-1986 铆钉技术条件 Specifications for rivet

1015 GB/T 117-1986 圆锥销 Taper pins

1016 GB/T 118-1986 内螺纹圆锥销 Taper pins with internal thread 1017 GB/T 119-1986 圆柱销 Parallel pins

1018 GB/T 120-1986 内螺纹圆柱销 Parallel pins with internal thread

本文来源：https://www.bwwdw.com/article/wx6l.html