Configuring Context-Based Access Control(CBAC)

PT Activity: Configuring Context-Based Access Control (CBAC)

安全PT全为本人自己总结，首先进入配置需要输入ciscoconpa55 输入en回车在要求输密码为ciscoenpa55。

此题很简单都在R3上配置

R3(config)# ip access-list extended OUT-IN R3(config-ext-nacl)# deny ip any any R3(config-ext-nacl)# exit R3(config)# interface s0/0/1

R3(config-if)# ip access-group OUT-IN in R3(config)# ip inspect name IN-OUT-IN icmp R3(config)# ip inspect name IN-OUT-IN telnet R3(config)# ip inspect name IN-OUT-IN http R3(config)# ip inspect audit-trail

R3(config)# service timestamps debug datetime msec R3(config)# logging 192.168.1.3

R3(config-if)# ip inspect IN-OUT-IN out

本文来源：https://www.bwwdw.com/article/vx9v.html