DF12D-36DS-0.5V中文资料

Correspond to automatic mounting

The vacuum pick-up area secures the automatic mountingmachine for pick and place.

sFeatures

1. Broad Variations of Stacking Height

In addition to 0.5mm pitch ultra-miniature size connector, the stacking height of 3mm, 3.5mm, 4mm, and 5mm are provided.

Note 1 : (**)of the product name DF12# (**) indicates the stacking height.Note 2 : The stacking height doesn't include the soldering paste thickness.

[Stacking Height Variation]

The connector has the vacuum pick-up area to enable automatic mounting with the embossed tape packaging.

3. Metal Fitting Available

The product including the metal fitting to prevent solder peeling is provided, considering the mounting on FPC.

sApplications

Mobile phone, LCD(

Liquid Crystal Display), MO(Optical Disk), Note PC

A297

元器件交易网

sProduct Specifications

sOrdering Information

qReceptacle

DF12 # (**)- *DS - 0.5 V (**)

q

w

e

r

t

y

u

i

: DF12

Fitting

BlankABC

K∞K∞

BossKK∞∞

qSeries NamewType

eStacking height

3.0Blank

: 3.0mm: 3.5to 5.0mm

yContact Pitch : 0.5mmuContact StyleV: Straight SMTiPackaging Type

(81) : Embossed tape packaging

rNumber of Contacts : 20, 30, 32, 36, 40, 50, 60(The 32 contacts connector includes thestacking height 3mm only.)tConnector Type

DS : Double-row receptacle

qHeader

DF12 # (**)- *DP - 0.5 V (**)

q

w

e

r

t

y

u

i

Fitting

BlankBDE

KK∞∞

BossK∞K∞

wTypeeStacking height

Stacking Height3.03.54.05.0

3.0mm3.5mm4.0mm5.0mm

tConnector Type

DP: Double-row pin header

A298

元器件交易网

sReceptacle

[Specific No.]– **, (**)

(81): Gold plated embossed tapepackaging

qProduct Height: 3mm Product

Unit: mm

qProduct Height: 3.5 to 5mm Product

Unit: mm

A299

元器件交易网

sReceptacle

[Specific No.

]

– **, (**)

(81): Gold plated embossed tapepackaging

qProduct Height: 3mm Product

Unit: mm

A300

元器件交易网

sHeader[Specific No.]– **, (**)

(81): Gold plated embossed tapepackaging

qStacking Height: 3.5 to 5mm Product

Unit: mm

A301

元器件交易网

sHeader

[Specific No.

]– **, (**)

(81): Gold plated embossed tapepackaging

qStacking Height: 3.5 to 5mm Product

Unit: mm

A302

元器件交易网

sHeader

[Specific No.

]– **, (**)

(81): Gold plated embossed tapepackaging

qStacking Height: 3mm Product

Unit: mm

A303

元器件交易网

sHeaderqStacking Height: 3.5 to 5mm Product

[Specific No.]– **, (**)

(81): Gold plated embossed tapepackaging

Unit: mm

A304

元器件交易网

BEmbossed Carrier tape Dimensions

qReceptacle

qHeader

A305

元器件交易网

qReel Dimensions

BRecommended PCB mounting pattern

sDF12 with metal fitting

sDF12 without metal fitting

Note 1 : Refer to A299 to A304 for sides A, B, and D.

Note 2 : If the boss isn't included, the boss shown in the above figure isn't required.

Note 3 :

If the pattern is included in the shaded area, and not treated with resist, it could touch the connector contact .

A306

元器件交易网

BPrecautions for Use

1.Recommended Temperature Profile (SMT)

Note 1 : Maximum twice action is allowed under the same condition. However, the interval

between the first and second actions must be maintained at the room temperature.

Note 2 : The temperature indicates the board surface temperature In the connector lead area.

2.Recommended Manual Soldering Condition (SMT)

Soldering iron temperature: 290±10ç, Soldering time: Within 2 seconds

When the 0.15mm thickness is used, set the metal mask open area to 85% as a target.

4.Board Warp(SMT)5.Cleaning Condition6.Cautions

Maxmum 0.02mm in the connector center area, based on both connector edgesRefer to "Nylon Connector Use Hand book".

sThe receptacle is designed in a structure where contacts are exposed. Touching it with bare hands would cause contact failure or electrostatic element damage.

scontact deformation.

sthan the connector.

sExcessive scoop insertion or extraction may result in damage.

sblister on the connector.

sThe color phase of this product may be slightly different from that of the formed productaccording to the manufacturing lot. However, the difference doesn't affect the performance.

3.Recommended Screen Thickness (SMT)0.12mm

A307

本文来源：https://www.bwwdw.com/article/ud94.html