U3S - MP教程

3S-66XX USB Flash Disk

MP Tool User Manual

MP Version： V2.153 Document Version： V1.01 Editor： Henry Lo Date： 2009/12/9

INDEX

INDEX ............................................................................................................. 1 I.

Basic of MP ............................................................................................. 2

II. Procedure of MP ..................................................................................... 3 III. MPT1 Setting for MP ............................................................................ 12 IV. Configuration File for MP .................................................................... 15 V. Error-Code List ..................................................................................... 23 VI. MP Flow ................................................................................................. 25

- 1 -

I. Basic of MP

The MP tool of 3S USB Flash Disk is used to format the pen driver designed by Solid State System Corporation. It also provides the function for flash-disk manufacturer to set the parameters to meet the design targets. Some files are essential and listed for MP tool as below. (1) ISP_CODE：The folder which involves the F/W ISP-Code (2) CONFIGURATION FILE

A file, which records the parameters and path to meet the configuration of DUTs, is essential. The file name is strongly recommended being named with the attributes of flash type, 3S-controller, firmware version, and so on, in case of a great number of INI-file existences.

EX：6691_43D3_VA206

－ 6691：Part number of 3S-Controller － 43D3：Process of flash supported － VA206：Firmware version used

(3) MPT1.INI：A file, which provides the options for MP tool (4) MP TOOL

Double click the MP icon to launch the MP Tool. The software would read MPT1.INI and the configuration file selected by users to get all parameters ready. Naming rule of MP Tool is U3S_MP_MPVersion, such as U3S_MP_V2150. 《Folder & File for MP》

- 2 -

II. Procedure of MP

MP steps would be divided into two sections：The first one is must-do to complete the disk formatting, and the second one is to provide functions for users to get realized what MP program did and more detailed format information about flash equipped. Step1：Double click the MP icon to launch MP tool.

Step2：Choose the specified configuration to get the appropriate setting for DUT.

Step3：After selecting the configuration, the UI would show up as below.

－ Setting-Mode = 6 (refer to MPT1 setting for details.)

Clock ISP information from Configuration File Information of Detected Device Start & Stop Button Information of Card & MP Extra Function & Setting MP-Times Counting & Reset Error Code Look-Up Table - 3 -

－ Setting-Mode = 8 (refer to MPT1 setting for details.)

※ In order to precisely find the location out, please make sure of connecting

DUTs via hub if the mode is set to 8.

ISP information from Configuration File Information of Detected Device Error Code Look-Up Table Clock MP-Times Counting & Reset Start & Stop Button Information of Card & MP Extra Function & Setting

Step4：Plug-in the device, which needs formatting, and then the disk would be detected

automatically and listed by order onto the field of Device Information.

Detected Devices Disk-H：Disk Label (0xB3)：FW Version Two devices

- 4 -

本文来源：https://www.bwwdw.com/article/u6n2.html