皮带输送机英文说明书

July 2012

First of all thank you to purchase and use our products, I hope our products can in your work to bring you the convenience and comfort.

Before using this unit, please read this manual. So that you can safe, correct operation and maintenance, and makes the machine has long maintained good working state.

1.Main purposes and scope of use The conveyor belt is mainly used for

conveying process.

２.The main technical parameters and materials

Motor: the use of 0.75KW 400V Taiwan sub gear motor; Inverter: using 0.75KW230V Taiwan Tai an converter; Conveyor belt : the 2.0PVC green belt

( plus baffle baffle spacing high 100mm, 400mm ); Side panel: the 23*80 aluminum production; Baffle: using 2mm cold plate bending production, height 300mm;

Frame: by 40*40 aluminum production; Adjust the foot : the universal casters with brakes;

Note: power system has been installed safety protection device

3. Security affairs

3.1 To avoid human on the machine precision electronic parts and

mechanical structure damage, the company strongly recommended by professionals on the site installation and commissioning. The installation and debugging of should also have a high level professionals to conduct on-site guidance, at the start of operation machine in the early 1-3 days, the machine may be operated temporarily abnormal, it should be pointed out that this phenomenon in the early days is normal.

3.2 On the first before use to check to be marked on motor nameplates of

voltage, current, FM, etc and numerical practical power source, and the corresponding components (such as electric wire and cable, socket, plug, fuse, etc.) is consistent, the use of high voltage may cause fever, damage to electrical components. Examination of these components are reliable, there is no loose or bad situation, the reliability of components and is loose and bad contact may cause the device to start or normal operation. Inspection of electronic control box and the chain plates if there is debris, debris may cause mechanical portion of the card death led to operation of the machine is not smooth and electronic equipment, heating, short circuit. As far as we know, the dust will cause the electronic components of the short circuit and may in the static magnetic field inside the electrostatic effect of electronic signal transmission reliability.

3.3 When a fault or abnormal sound, should be immediately shut down

and cut off power supply ( pull the plug, cut off the user switch or immediately according to the emergency stop switch ), then please equipment repair personnel to inspect and repair the machine, it is worth emphasizing, live operation is not very safe, have to be in there electric case for repair or inspection, should let the qualified professionals engaged in. Due to the mechanical structure is special, in a machine case for machine for testing may cause personnel injury, so in the detection of the former should first consider the personnel security, general workers should wear electricity-proof shoes, wear safety cap. In testing, the

assembly should have at least than its high level professionals for their guidance, only such ability in the special case when the help, safeguard life security.

3.4 Do not let the conveyor in unattended operation,if the conveyors in

the unattended operation, is very dangerous, the prohibition of an operator other than the people running the machine, not familiar with the machine performance to the operation of the machine may be caused by Wrong operation caused by the whole line can not normally work, at the same time as the operating potential risk, it is recommended that you do not let not those skilled in its operation, in the operation of the equipment should be particularly prevent children close to the machine, more children are prohibited to touch or operating machinery!

3.5 Do not delivery is too heavy or wide object if more than design

standard delivery, may cause the operation of the machine is not normal, the mechanical structure of the death card, the mechanical components of the fever, damage, aging, for electrical components may be due to increased load, short circuit caused fever unknown phenomenon.

4. Installation, use and maintenance

4.1 The machine should be placed on a flat surface, avoid direct sunlight

or high temperature.The ground roughness may cause difficulty in installation and operation of the machine to instability. The direct sun or high temperature may cause plastic materials aging and electronic pieces

本文来源：https://www.bwwdw.com/article/u66t.html