仪表专业采用的标准

仪表专业采用的标准

《中华人民共和国环境保护法》

《中华人民共和国海洋环境保护法》

《海上固定平台安全规则》

ANSI/ISA-84.01, Application of Safety Instrumented Systems for

the Process Industries 2004

ANSI/FCI 70-2 (formerly ANSI B16.104), Control Valve Seat

Leakage 1998

API RP 14C, Analysis, Design, Installation, and Testing of Basic

Surface Safety Systems on Offshore Production Platforms 2001 API RP 14G, Recommended Practice for Fire Prevention and

Control on Open Type Offshore Production Platform 1993（R02）

API RP 14F, Recommended Practice for Design and Installation for

Electrical Systems for Offshore Production Platforms 1999

API, Manual of Petroleum Measurement Standards, Chapter 14.3,

Natural Gas Fluids Measurement. 1990(R03)

API, Manual of Petroleum Measurement Standards, Chapter 5.3,

Measurement of Liquid Hydrocarbons by Turbine Meters 2005 API RP 520, Recommended Practice for the Design and

Installation of Pressure Relieving Systems in Refineries 2000

API RP 521,Guide for Pressure Relieving and Depressurizing

Systems 2007

ISA RP 7.1, Recommended Practice for Pneumatic Control Circuit

Pressure Test

API RP 551, Process Measurement Instrumentation 1993 API RP 552, Transmission Systems 1994

API RP 553, Refinery Control Valves 1998

API RP 554, Process Instrumentation and Control 1995

API RP 555, Process Analyzers 2001

API RP 526, Flanged Steel Safety Relief Valves 2002

API RP 527, Commercial Seat Tightness of Safety Relief Valves.

91(R02)

API RP 2000, Guide for Venting Atmospheric and Low Pressure

Storage Tanks 1998

FF-596 Foundation Fieldbus Host Interoperability Support Test

Procedures

FF-816 Foundation Specification 31.25 kbits/s Physical Layer

仪表专业采用的标准

Profile

FF-890 Foundation Specification Functions Block Application

Process

ISA-S5.1, Instrumentation Symbols and Identification. 1984(R92) ISA-S5.3, Graphic Symbols for Distributed Control/Shared,1983

Display Instrumentation, Logic, and Computer Systems

ISA S50.02, Fieldbus Standard for Use in Industrial Control

Systems, Part 2: Physical Layer Specification and Service Definition 1992

ISA-S75.0101, Flow Equations for Sizing Control Valves. 2002 ISA-12.1, Recommended Practice for Electrical Instruments in

Hazardous Atmospheres

ISA 20, Specification Forms for Process Measurement and Control

Instruments, Primary Elements, and Control Valves 1981

NFPA, National Fire Protection Association

NFPA No. 70, National Electric Code 2005

NFPA No. 72, National Fire Alarm Code 2007

NFPA No. 496, Purged and Pressurized Enclosures for Electrical

Equipment 2003

NEMA Standards. SAMA PMC-331.1, Electromagnetic

Susceptibility of Process Control Instrumentation

IEC 60331 (11~25)，Fire Resisting Characteristics of Electric

Cables

IEC 60332(1~3)，Tests on Electric Cables Under Fire Conditions ASME VIII，Pressure Vessels and Boiler Code

ISO 5167-1~4-2003 International Organization for Standardization

Measurement of fluid flow by means of orifice plats, nozzles and venturi tubes inserted in circular cross-section conduits running full

AGA Gas Measurement Committee report No. 3 ，Orifice Metering

of Natural Gas （ANSI/API 2530）1992

AGA Gas Measurement Committee Report No. 8, Compressibility

and Super-Compressibility for Natural Gas and Other Hydrocarbon Gases 1994

AGA Gas Measurement Committee Report No. 9, Measurement of

Gas by Ultrasonic Meter 2007

IEC 61131.2 programmable controllers; equipment requirements.

2003

仪表专业采用的标准

IEC 61131.3 programmable controllers; programming languages.

2003

IEC 61508 Functional Safety of Programmable Electronic Safety

Related Systems 61508-0~7 1998~2005

IEC 60079 Electrical Apparatus for Explosive Gas Atmospheres

60079-0,-1,-2,-4~-7,-10~20,-25~28-1978~2006

本文来源：https://www.bwwdw.com/article/u5c1.html