迈普iad配置

先找测试环境进行业务测试，需注意红色处 ena admin

conf t

host sbc.chinamobile.com 120.193.241.193 host ims.nm.chinamobile.com 120.193.241.193

interface fastethernet 0

ip address 192.168.0.2 255.255.255.0 exit

ip route 0.0.0.0 0.0.0.0 192.168.0.1

callrouting-conf

dial-peer 1 pots slot 1

channel 0 0 destination-pattern 04822840789

channel 0 0 username 864822840789@ims.nm.chinamobile.com password dgkd8ncaqbxwrmf channel 1 1 destination-pattern 04822840790

channel 1 1 username 864822840790@ims.nm.chinamobile.com password dgkd8ncaqbxwrmf exit dial-peer 2 voip

destination-pattern xx. session-target sip-server exit exit

fxs-card 1

channel 0 7 codec g711a channel 0 7 enable

channel 0 7 callid enable exit

voicesrv-conf black-white-list exit

sip national-code +86 call-transfer disable

call-transfer consultation user-config enable exit

interface fastethernet0

sip-gateway voip interface

sip-gateway voip proxy domain-name ims.nm.chinamobile.com sip-gateway voip registrar domain-name ims.nm.chinamobile.com exit

no sip-gateway voicesrv-conf

sip national-code +86 exit

sip-gateway end

show sip regNumber // 查看是否注册成功

write //测试环境注册正常后，保存

现场操作

确认用户的IP，然后对红色的ip更换 ena admin

conf t

interface fastethernet 0

ip address 192.168.1.2 255.255.255.0 exit

ip route 0.0.0.0 0.0.0.0 interface 192.168.1.1

部分语句注解 callrouting-conf

dial-peer 1 pots slot 1

channel 0 0 destination-pattern 04822840789

channel 0 0 username 864822840789@ims.nm.chinamobile.com password dgkd8ncaqbxwrmf 此处的 0 0 代表设备第一个电话口

fxs-card 1

channel 0 7 codec g711a channel 0 7 enable

channel 0 7 callid enable

此处的 0 7 代表 8口的迈普IAD

16口的IAD则为 0 15， 32口IAD则为 0 31

本文来源：https://www.bwwdw.com/article/tfpd.html