德国软管标准(DIN hose standards)

德国软管标准(DIN hose standards)

DIN 14332-1986

输送管路的 C 型铝合联接器. 公称压力 16 .用 于 C42 消防软 管

Aluminium alloy delivery coupling type C; nominal pressure 16; used for fire hoses C 42

DIN 14461-5-1984

与干式灭火上 升 总 管 道 连 接 Delivery valve installations 的 输 送 阀 装 connected with dry rising fire 置.PN16 救火软 mains; fire hose valve PN 16 管阀 Water conduit for fire extinguishing - Planning and installation of fire hose systems and water conduit for fire extinguishing, Corrigenda to DIN 14462:2007-01

灭火用引水管. 灭火软管系统 DIN 14462 和 引 水 管 道 的 Berichtigung 规 划 和 安 1-2007 装 .DIN 14462-2007 勘 误表 消防灭火用给 水系统.遥控注 水和泄水装置. 第 1 部分:消防 软管的卷取系 统

DIN 14463-1-2007

Water systems for fire extinguishing - Filling and draining devices operated by remote control - Part 1: For hose reel systems

DIN 14572-2002

排 气 金 属 软 管 Exhaust gas metal hoses and 用 排 气 金 属 软 couplings for exhaust gas metal hoses 管和联轴器 灭 火 剂 用 吸 收 Pick up hose for extinguishing requirements, test 软管.要求.检验 agents; methods, treatment 方法、处理 消防水龙管桥 架.第 1 部分:木 Bridges for fire hoses - Part 1: 制 消 防 软 管 桥 Bridges for fire hoses of wood 架 消防设备.输水 软管运输用笼 筐.第 1 部分:B、 C 和 D 型输水软 管运输用笼筐 Fire fighting equipment - Cages for transport of delivery hoses Part 1: Cages for transport of delivery hoses type B, C and D

DIN 14819-1

982

DIN 14820-1-2000

DIN 14827-1-2005

DIN 14828-2004

绳索软管架 灌溉系统用可 卷 绕 聚 乙 烯 (PE) 管 道 和 软 管.第 2 部分:形 状固定的织物 芯层软管.尺寸 和供货技术条 件 灌溉系统用可 盘 绕 聚 乙 烯 (PE) 管 和 软 管 . 带织物内层的 非刚性材料软 管.第 3 部分:尺 寸和供货技术 条件

Rope hose holders

DIN 19658-2-1994

Polyethylene (PE) coiling pipes and hoses for irrigation systems - Part 2: Hoses with fabric inlay, rigid form; dimensions and technical delivery conditions

DIN 19658-3-1988

Polyethylene (PE) coiling pipes and hoses for use in irrigation systems; hoses of nonrigid material with woven fabric inner layer; dimensions and technical delivery conditions

DIN 20018-1-2003

织物增强软管. Textile-reinforced hoses - Part 第 1 部分:最大 1: Maximal working pressure 工 作 压 力 PN PN 10/16 10/16 织物增强软管. Textile-reinforced hoses - Part 第 2 部分:最大 2: Maximal working pressure 工作压力 PN 40 PN 40 织物增强软管. Textile-reinforced hoses - Part 第 3 部分:最大 3: Maximal working pressure 工 作 压 力 PN PN 100 100 织物增强软管. Textile-reinforced hoses - Part 第 4 部分:试验 4: Testing 液压系统.带衬 里 的 软 管 .DIN Fluid-systems - Hoses with EN 853 至 DIN layer - Completation for DIN EN 857 的补充 EN 853 to DIN EN 857 件 软管管接头.1:3 Hose fittings; 1:3 taper gauges 锥度量规

DIN 20018-2-2003

DIN 20018-3-2003

DIN 20018-4-2003

DIN 20021-1997

DIN 20029-1990

DIN 20030-1992

软管连接件.带 Hose fittings; straight-way-cock grip; dimensions, 柄的直旋塞.尺 with 寸、 材料和要求 materials, requirements 软管连接件.带 Hose fittings; tapered nozzle 压紧螺母的锥 with clamping nut 形管嘴 软管管接头.法 Hose fittings; flange nozzle; 兰管嘴.公称压 nominal pressure 16 力 16 软管管接头.圆 Hose fittings; coupling nipples 螺纹的管接头 with round thread form 套管 软管管接头.连 Hose fittings; connecting nipple; dimensions 接套管.尺寸 软管管接头.接 Hose fittings; coupling nozzles 头管嘴 软管连接件.软 Hose fittings - Hose clamps 管夹 软管管接头.连 Hose fittings; nipple valves; 接套管阀.公称 nominal pressure 16 压力 16 流体动力系统. Fluid power systems - Hose Dimensions, 软管组件.尺寸、 assemblies requirements 要求 地下矿井用合 成器材和材料. 管、 管隔离件和 软管.安全要求、 检验、标识 Articles and materials from synthetic for use in underground mines; tubes, tube isolations and hoses; safety requirements, testing, marking

DIN 20033-1990

DIN 20035-1990

DIN 20036-1990

DIN 20037-1990

DIN 20038-1990

DIN 20039-1998

DIN 20040-1990

DIN 20066-2002

DIN 22100-5-1993

DIN 24950-1-1978

第 1 部分:液压 Oilhydraulic and pneumatic; 和气动软管组 terms for hose assemblies 件术语 有轨机动车部 件名称.互通通 道.第 1 部分:橡 胶管通道

连接 Terms for railway vehicle parts Intercommunicating gangways Part 1: Rubber tube gangway connection

DIN 25624-1-2001

DIN 2827-2006

化 学 制 品 用 不 Hose assemblies of stainless steel for chemical products 锈钢软管 涡 轮 传 动 软 管 Hose clamps with worm gear drive; shape A 卡圈.A 型 软管卡箍.第 2 Hose clamps - Part 2: Clamps 部分:带紧固凸 with fastening lugs 缘的卡箍 软管卡箍.第 3 Hose clamps - Part 3: Bolt 部分:螺栓卡箍 clamps 软管卡圈.第 4 Hose clamps - Part 4: Technical 部分:技术交货 delivery conditions 条件 软管卡箍.第 5 部分:带紧固凸 Hose clamps - Part 5: Wide strip 耳 的 宽 带 软 管 hose clamps with fastening lugs; 卡箍.D 型和 E Types D and E 型 软管夹件.弹簧 Hose clamps - Spring band 板夹件(FBS).第 clamp - Part 1: Dimensions, 1 部分:尺寸、 标 marking, materials, types 记、 材料和类型 软管夹子.弹簧 Hose clamps - Spring band 带夹子.第 2 部 clamp - Part 2: Technical 分:交货技术条 delivery conditions 件 软管夹子.弹簧 带夹子.第 3 部 Hose clamps - Spring band 分 : 系 统 : 弹 簧 clamp - Part 3: System: Spring 带夹子-软管-插 band clamp-hose-spigot 口 不带外罩和配 筋的实验室用 燃气灶软管.第 1 部分:安全要 求和试验 Hoses for gasfired burners for laboratories, without shroud and armoring - Part 1: Safety requirements and tests

DIN 3017-1-1998

DIN 3017-2-2002

DIN 3017-3-2002

DIN 3017-4-1998

DIN 3017-5-2002

DIN 3021-1-1999

DIN 3021-2-1999

DIN 3021-3-1999

DIN 30664-1-1994

DIN 30693-1980

液 化 石 油 气 用 Safety devices against rupture 软 管 的 防 断 裂 of flexible tubes for LPG

安全防护装置 压缩空气匹配 件.爪状匹配件, 带安全螺母内 部 宽 度 42mm, 具有凸或凹软 管连接末端的 匹配件连接环 家用供水管道 的阀门.公称压 力为 10 的螺纹 连接管和联管 节.软管连接管 家用供水管道 的阀门.公称压 力为 10 的螺纹 连接管和联管 节.带螺纹的软 管连接管 煤气软管组件 和连接阀.安全 软管组件、 带有 快速连接装置 的安全阀

DIN 3238-2001

Couplings for compressed air Claw coupling, 42 mm internal width, with securing nut Coupling with male, female and hose connection ends, joint ring

DIN 3285-1988

Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples

DIN 3291-1988

Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples

DIN 3383-1-1990

Hose assemblies and connection valves for gas; safety hose assemblies, safety valves with quick connecting device

DIN 3383-2-1996

燃 气 软 管 及 连 Hose assemblies and connection 接件.第 2 部分: valves for gas - Part 2: Hose assemblies for rigid connection 刚性连接软管 软管组件和连 接配件.煤气用 安全连接配件 和试验室管路 用接头 Hose assemblies and connection fittings; safety connection fittings fo

r gas and couplings for laboratory tubing

DIN 3383-4-1991

DIN 3384-2007

燃气用不锈钢 Hose assemblies of stainless 软管组件.安全 steel for gas - Safety 要求、 测试和标 requirements, testing, marking 记 压 缩 空 气 匹 配 Couplings for compressed air 件.爪状匹配件, Claw coupling, 42 mm internal

DIN 3489-2001

无安全螺母的 42mm 内 宽 , 凸 形凹形匹配件, 软管和封闭连 接末端旋转匹 配件,连接环 1KV 以下的塑 料绝缘电力电 缆用热缩塑料 软管的连接套 管.保护性连接 套管 1KV 以下的塑 料绝缘电力电 缆用热缩塑料 软管的连接套 管.内套管 1KV 以下的塑 料绝缘电力电 缆用热缩塑料 软管的连接套 管.导线横截面 的配置 1KV 以下的塑 料绝缘电力电 缆用热缩塑料 软管的连接套 管.内部结构

width, without securing nut Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring

DIN 47632-1-1978

Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; joint protection boxes

DIN 47632-2-1978

Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal joint boxes

DIN 47632-3-1978

Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; allocation of conductor cross sections

DIN 47632-4-1978

Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal construction

DIN 4815-2-1979

液化气用软管. Hoses for LPG; hose assemblies 软管组件 液化气用软管. Flexible tubes for LPG; flexible 运输车辆用加 tubes for filling and emptying of 气和排空用软 transportation vehicles 管管道 液化石油气用 Hoses for LPG; hoses and hose 软管.车辆燃气 assemblies for fuel gas 装置用软管和 installations in vehicles 软管组件

DIN 4815-3-1985

DIN 4815-4-1987

DIN 4815-5-1988

液化气用软管. 车辆液化气管 道用软管接合 器.第 5 部分:安 全要求概念、 试 验、标记 电气装置用导 管和管件.用于 重机械应力的 金属软管.结构 形式和要求

Hoses for LPG; coupling for LPG hose assemblies in vehicles; concepts safety requirements, tests, marking

DIN 49012-1982

Conduits and fittings for electrical installation; flexible metal conduits for heavy mechanical stresses construction types and requirements

DIN 5065-1987

包装.金属及塑 Packaging; plastic closures for 料软管用端口 metal and plastic tubes 塑料密封物 包装材料.圆柱 形塑料软管.同 轴多层管.尺寸、 材料 Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube; Dimensions, materials

DIN 6103-2002

DIN 65164-1-1997

航空航天.非金 Aerospace - Non metallic 属编织软管.第 braided cable sleevings - Part 1: 1 部分:尺寸、 重 Dimensions, masses 量 航空航天.非金 Aerospace - Non metallic 属编织软管.第 braided cable sleeving

s - Part 2: 2 部分:技术规 Technical specification 范 航空航天.液体 Aerospace; configuration and 管道的构造和 design of fluid pipelines; hose 设计.软管组件、 assemblies, manufacture 制造 航空航天.额定 压 力 最 高 可 达 Aerospace; hose assemblies for 210 巴 的 软 管 nominal pressures up to 210 bar; 组件.第 1 部分: technical specification for hoses 软管技术规范 航空航天.额定 Aerospace; hose assemblies for 压 力 最 高 可 达 nominal pressures up to 210 bar; 210 巴 的 软 管 technical specification for hose

DIN 65164-2-1997

DIN 65178-6-1987

DIN 65210-1-1987

DIN 65210-2-1987

组件.第 2 部分: fittings 软管配件技术 规范 航空航天.额定 压力最高可达 210 巴 的 软 管 组件.第 3 部分: 成套软管组件 技术规范

DIN 65210-3-1987

Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for complete hose assemblies

DIN 65211-1-1987

航空航天.额定 压 力 最 高 可 达 Aerospace; hose assemblies for 210 巴 的 软 管 a nominal pressure of 210 bar; 组件.第 1 部分: technical specification for hoses 软管技术规范 航空航天.额定 压力最高可达 210 巴 的 软 管 组件.第 2 部分: 软管配件技术 规范 航空航天.额定 压力最高可达 210 巴 的 软 管 组件.第 2 部分: 成套软管组件 技术规范

DIN 65211-2-1987

Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hose fittings

DIN 65211-3-1987

Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for complete hose assemblies

DIN 65212-1988

航空航天.仪表 Aerospace; instrumentation low hoses; technical 的低压软管.技 pressure specification 术规范 航空航天.公称 压力为 35 巴以 下的套管连接 用软管.技术规 范 Aerospace; hoses for sleeve attachment for nominal pressures up to 35 bar; technical specification

DIN 65213-1988

DIN 73379-1-1997 DIN

燃油软管.第 1 Fuel hoses - Part 1: Dimensions, 部分:尺寸、材 material, marking 料、标记 燃油软管.第 2 Fuel hoses Part 2:

73379-2-1997

部分:要求和试 Requirements and tests 验 汽车冷却管.软 Cooling pipes in motor vehicles 管和元件.第 1 - Hoses and compounds - Part 1: 部分:尺寸、材 Dimensions, materials, types 料、类型 汽车冷却管.软 Cooling pipes in motor vehicles 管和化合物.第 - Hoses and compounds - Part 2: 2 部分:要求和 Requirements, testing 试验 液压制动软管 组件.制动用软 Brake hose assemblies; brake 管接头.制动软 hose fittings; brake hose clips 管夹 气压制动系统. Air braking systems; packing 双管气压制动 rings for hose couplings for 系统的软管联 double line braking systems 结器的密封圈 压接管接头.软 Compression coupling 管接头 coupling; hose

DIN 73411-1-1996

DIN 73411-2-1996

DIN 74225-1991

DIN 74286-1988

DIN 74304-1987

DIN 74310-1-1993 DIN 74310-2-19

93

气压制动设备. Air braking systems; hoses; 软管.尺寸、材 dimensions, material, marking 料、标志 气压制动设备. Air braking systems; hoses; 软管.要求、 试验 requirements, tests 气压制动系统. Air braking systems; hose 软管连接管.形 nipples; shapes, dimensions 状和尺寸 家用设备的水 管配件.公称压 力 10 巴的两端 用软管连接的 带扁平垫圈的 螺纹连接管 硬橡胶管 Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10 Ebonite pipes products -

DIN 74325-1988

DIN 7591-1981

DIN 7714-1975 DIN

橡胶产品.尺寸 Rubber

7715-40-1998

公差.软管 船舶和海上技 术.技术文献的 图形符号.第 2 部分:管和软管 组件.管和软管 连接.套管 焊接、 切割和相 关工艺用软管. 燃料气体、 氧气 和其它不可燃 气体用带外保 护套的软管 焊接、 切割和相 关工艺用橡胶 软管.第 3 部分: 特殊要求用有 涂层和无涂层 的氧化橡胶软 管.安全要求和 检验 灭火和甲板冲 洗设备.软管接 头.管件.软管.附 件.造船用各类 管件产品概要

Dimmensional tolerances; hoses Ships and marine technology Graphical symbols for technical documentation - Part 2: Piping and hose assemblies, pipe and hose-joints, penetrations

DIN 85005-2-1999

DIN 8541-2-1987

Hoses for welding, cutting and allied processes; hoses with protective cover for use with fuel gas, oxygen and other non-combustible gases

DIN 8541-3-1995

Rubber hoses for welding, cutting and allied processes Part 3: Oxygen rubber hoses with and without coatings for special requirements; safety requirements and testing

DIN 86200-1989

Fire extinguishing and wash deck installation; hose couplings, armatures, hoses, accessories; summary of types for shipbuilding

DIN 86204-1993

船舶用黄铜制 Solid fire hose coupling type C, 公称压力 16 的 PN 16; made of brass, for use C 型整体消防 on ships 软管接头 船舶用黄铜制 Solid fire hose coupling type B, 公称压力 16 的 PN 16; made of brass for use on B 型整体消防 ships 软管接头 公称压力(PN) 16、带 C 或 B Fire valves for PN 16, with fire 型 消 防 软 管 管 hose couplings type C or B and 接 头 和 带 法 兰 with flange connection 连接的灭火阀

DIN 86205-1993

DIN 86211-1991

DIN 9462-1987

航空航天.软管 Aerospace; survey 组件.测量

hose

assemblies;

压 接 和 模 锻 的 Hose tail and ferrule for DIN CEN/TS 软 管 口 和 金 属 crimping and swaging; German 14421-2007 version CEN/TS 14421:2006 环 DIN 10324-2004 Steel wire and wire products EN 钢 丝 和 钢 丝 制 Hose reinforcement wire; 品.软管加筋线 German version EN 10324:2004 EN 盥洗室(PN 10) Showers hoses for (PB 10) tapware; German 管 件 用 淋 浴 喷 sanitary version EN 1113:1997 头软管 Rubber and thermoplastic hoses and hose assemblies for liquid or gaseous chemicals

Specification - Resistance

DIN 1113-1997

液体或气体化 学品用橡胶和 DIN EN 12115 热塑软管和软 Bb.1-2001 管组件.规范.耐 受性

DIN 12115-1999

Rubber and thermoplastics 液体或气体化 hoses and hose assemblies for EN 合 物 用 橡 胶 和 liquid or gaseous chemicals 热塑性软管及 Specification; German version 软管组件.规范 EN 12115:1999 Irrigation technic - Reel machine systems - Part 1: Size series; German version EN 12324-1:1998

灌溉方法.喷灌 DIN EN 用 绕 软 管 轮 系 12324-1-1999 统.第 1 部分:尺 寸系列

DIN 12375-1998

Packaging - Flexible aluminium 包装.铝软管.管 EN tubes Wall thickness 壁厚度的测定 determination method; German 方法 version EN 12375:1998 Packaging - Flexible tubes - Test 包装材料.软管 EN method for the air tightness of 材.封闭体的气 closures; German version EN 密性试验方法 12377:1998 Cryogenic vessels - Cryogenic EN 低温容器.低温 flexible hoses; German version 软管 EN 12434:2000 EN 气焊设备.焊接、 Gas welding equipment -

DIN 12377-1998

DIN 12434-2000 DIN

1256-2006

for hose 切 割 和 相 关 工 Specification 艺 设 备 用 软 管 assemblies for equipment for welding, cutting and allied 组件规范 processes; German version EN 1256:2006 Packaging - Flexible cylindrical 包装.圆柱形塑 EN plastic tubes - Dimensions and 料软管.尺寸和 tolerances; German version EN 公差 13045:2000 Packaging - Flexible cylindrical 包装.圆柱形金 EN metallic tubes - Dimensions and 属软管.尺寸和 tolerances; German version EN 公差 13046:2000 Packaging - Flexible conical 包装.圆锥形金 EN metallic tubes - Dimensions and 属软管.尺寸和 tolerances; German version EN 公差 13047:2000 Packaging - Flexible aluminium 包装.铝软管.内 EN tubes - Internal lacquer film 部清漆薄膜厚 thickness measurement method; 度测量方法 German version EN 13048:2000 Ventilation for buildings 建筑物通风.通 Ductwork - Dimensions and EN 气管结构.软管 mechanical requirements for 尺寸和机械要 flexible ducts; German version 求 EN 13180:2001 Gas welding equipment 气焊机.焊接及 EN Thermoplastic hoses for 相关工艺用热 welding and allied processes; 塑软管 German version EN 1327:1996 Packaging - Cylindrical flexible 包装.圆柱形层 EN laminated tubes - Dimensions 压软管.尺寸和 and tolerances; German version 公差 EN 13461:2001 Rubber hoses and hose 沥青用橡胶软 EN assemblies for asphalt and 管及软管组件. bitumen Specification; 规范 German version EN 13482:2001

DIN 13045-2000

DIN 13046-2000

DIN 13047-2000

DIN 13048-2000

DIN 13180-2002

DIN 1327-1996

DIN 13461-2001

DIN 13482-2002

DIN 13483-2005

可测量的燃料 分配系统用带 EN 内 部 蒸 气 回 收 的橡胶和塑料 软管和软管组 件.规范

Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems Specification; German version EN 1348

3:2005

DIN 1360-2005

Rubber and plastic hoses and 已测燃料分配 hose assemblies for measured EN 系 统 用 橡 胶 和 fuel dispensing systems 塑料软管及软 Specification; German version 管组件.规范 EN 1360:2005 Rubber hoses and hose 航空燃料输送 EN assemblies for aviation fuel 用橡胶软管和 handling Specification; 软管组件.规范 German version EN 1361:2004 烃类、 溶剂和化 学品输送用热 EN 塑性多层(非硫 化)塑料软管和 软管组件.规范 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals Specification; German version EN 13765:2003 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas Specification; German version EN 13766:2003 Respiratory protective devices Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly Requirements, testing, marking; German version EN 138:1994

DIN 1361-2004

DIN 13765-2003

DIN 13766-2003

液化石油气和 液化天然气输 EN 送热塑性多层 非硫化软管和 软管组件.规范

DIN EN 138-1994

呼吸防护器.清 洁空气.全面罩、 半面罩或口罩 连接软管装置. 要求、 测试,标记

DIN 13905-2003 DIN

EN

卫 生 设 备 旋 塞 Low resistance shower hoses for tapware; German 用 低 阻 力 淋 浴 sanitary version EN 13905:2003 软管

EN 带 夹 具 的 软 管 Hose fittings with clamp units -

14420-1-2007

配件.第 1 部分: 要求、检查、名 称与符号和试 验

Part 1: Requirements, survey, designation and testing; English version of DIN EN 14420-1:2007-04 Hose fittings with clamp units Part 2: Hose side parts of hose tail; German version EN 14420-2:2004 Hose fittings with clamp units Part 3: Clamp units, bolted or pinned; German version EN 14420-3:2004

带夹件的软管 DIN EN 配件.第 2 部分: 14420-2-2005 软管尾部的软 管侧面部件 带夹件的软管 DIN EN 配件.第 3 部分: 14420-3-2005 栓接或销接夹 件

Hose fittings with clamp units 带夹具的软管 DIN EN Part 4: Flange connections; 配件.第 4 部分: 14420-4-2007 English version of DIN EN 法兰接头 14420-4:2007-04 Hose fittings with clamp units 带夹件的软管 DIN EN Part 5: Threaded connections; 配件.第 5 部分: 14420-5-2005 German version EN 螺纹连接 14420-5:2004 Hose fittings with clamp units 带 夹 具 的 软 管 Part 6: TW tank truck couplings DIN EN 配 件 . 第 6 部 (includes Amendment 14420-6-2007 分 :TW 油 罐 车 A1:2007); English version of DIN EN 接头 14420-6:2004+A1:2007-04 Hose fittings with clamp units 带 夹 件 的 软 管 Part 7: Cam locking couplings DIN EN Amendment 配件.第 7 部分: (includes 14420-7-2007 A1:2007); English version of 凸轮锁紧接头 DIN EN 14420-7:2007-04 Hose fittings with clamp units 带 夹 具 的 软 管 Part 8: Symmetrical half DIN EN 配件.第 8 部分: coupling (Guil

lemin system) 14420-8-2007 Amendment 对 称 半 节 管 接 (includes 头(吉尔曼系统) A1:2007); English version of DIN EN 14420-8:2007-04 DIN EN LPG 传送软管 Clamp type coupling assemblies

14422-2005

用 对 壳 式 耦 合 for LPG transfer hoses; German version EN 14422:2004 组件 额定电压 18 巴 EN 及 以 下 的 蒸 汽 软管用对壳式 耦合组件 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar; German version EN 14423:2004

DIN 14423-2005

DIN 14424-2005

Hose fittings with screwed EN 带 螺 旋 箍 的 软 ferrules; German version EN 管管件 14424:2004 防饮用水回流 污染的装置.软 EN 管 接 头 防 回 流 装置 DN 15 至 DN 32. A 型 H 系列 Devices to prevent pollution by backflow of potable water Hose union backflow preventer DN 15 to DN 32 - Family H; type A; German version EN 14454:2005

DIN 14454-2005

DIN 14540-2007

Fire-fighting hoses 灭火软管.固定 Non-percolating layflat hoses EN 系 统 用 非 渗 滤 for fixed systems; German version EN 14540:2004 + 扁平软管 A1:2007 Corrugated metal hose assemblies for pressure applications - Guidance on the use of conformity assessment procedures; English version of DIN EN 14585-1 Supplement 1:2006-04

DIN EN 14585-1 Bb.1-2006

压力设备用波 纹金属软管组 件.第 2 部分:合 格评定程序使 用指南

Corrugated metal hose 压力设备用波 assemblies for pressure DIN EN 纹 金 属 软 管 组 applications Part 1: 14585-1-2006 件.第 1 部分:要 Requirements; German version 求 EN 14585-1:2006 Corrugated safety metal hose 使用气体燃料 assemblies for the connection EN 连 接 家 用 器 具 domestic appliance using 的波纹状安全 gaseous fuels; German version 金属软管组件 EN 14800:2007 EN 制 冷 系 统 和 热 Refrigerating systems and heat

DIN 14800-2007

DIN

1736-2000

泵.软管元件、 隔 振器和膨胀节. 要求、 设计和安 装

pumps - Flexible pipe elements, vibration isolators and expansion joints Requirements, design and installation; German version EN 1736:2000

DIN 1761-1999

Rubber hoses and hose 油罐车输油橡 EN assemblies for fuel truck 胶软管和软管 delivery Specification; 组件.规范 German version EN 1761:1999 25 巴 (2.5MPA) 及以下液化石 油气、 LPG(液相 EN 和气相)和天然 气用橡胶软管 和软管组件.规 范 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase) and natural gas up to 25 bar (2,5 MPa) Specification; German version EN 1762:2003 Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixture in the vapour phase Part 1: Requirements for rubber and plastics tubing and hoses; German version EN 1763-1:2000 Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixture in the vapour phase Part 1: Requirements for rubber and plastics tubing and hoses; German

version EN 1763-1:2000

DIN 1762-2004

DIN 1763-1-2001

商用汽态丙烷、 丁烷及其混合 物用橡胶和塑 EN 料管、 软管和配 件.第 1 部分:橡 胶管、 塑料管和 软管要求

DIN 1763-1-2001

商用汽态丙烷、 丁烷及其混合 物用橡胶和塑 EN 料管、 软管和配 件.第 1 部分:橡 胶管、 塑料管和 软管要求

DIN 1765-2005

Rubber hose assemblies for oil 油的吸放设备 EN suction and discharge services 用橡胶软管组 Specification for the assemblies; 件.组件规范 German version EN 1765:2004

DIN 1947-2007

Fire-fighting hoses - Semi-rigid 消防软管.泵和 delivery hoses and hose EN 水 车 用 半 刚 性 assemblies for pumps and 输水软管和软 vehicles; German version EN 管组件 1947:2002 + A1:2007 Rubber hoses for water suction EN 给 排 水 橡 胶 软 and discharge; specification (ISO 4641:1991); German 管.要求 version EN 24641:1993 Rubber or plastics hoses; 橡胶和塑料软 EN determination of volumetric 管.体积膨胀的 expansion (ISO 6801:1983); 测定 German version EN 26801:1993 金属丝增强的 橡胶和塑料软 EN 管组件.挠曲状 态下液压脉冲 试验 呼吸防护器.加 护罩的电动式 新鲜空气软管 呼吸器.要求、 检 验、标记; 德文 版 本 EN 269:1994 Rubber and plastics hose and hose assemblies with wire reinforcements; hydraulic impulse test with flexing (ISO 6802:1991); german version EN 26802:1993 Respiratory protective devices Powered fresh air hose breathing apparatus incorporating a hood Requirements, testing, marking; German version EN 269:1994

DIN 24641-1993

DIN 26801-1993

DIN 26802-1993

DIN EN 269-1994

DIN 27326-1993

Rubber and plastics hoses; 橡胶和塑料软 assessment of ozone resistance EN 管.静态条件下 under static conditions (ISO 耐臭氧性能的 7326:1991); German version 评定 EN 27326:1993 Plastics hose; general purpose 塑料软管.一般 collapsible water hose, textile EN 用 途 的 纺 织 物 reinforced; specification (ISO 增强的可折叠 8029:1985); German version 水管 EN 28029:1993 Dental handpieces - Hose EN 手 持 式 牙 科 器 connectors (ISO 9168:1991); 械.软管连接件 German version EN 29168:1994

DIN 28029-1993

DIN 29168-1994

DIN EN 559-2003

Gas welding equipment 气焊机.焊接、 切 Rubber hoses for welding, 割和相关工艺 cutting and allied processes; 用橡胶软管 German version EN 559:2003 Gas welding equipment - Hose 气焊设备.焊接、 connections for equipment for 切割和相关工 welding, cutting and allied 艺用设备的软 processes; German version EN 管连接 560:2005 Flexible insulating sleeving Part 3: Specification for individual types of sleeving; Sheet 151: Extruded PVC/nitrile sleeving; general purpose (IEC 60684-3-151:1998); German version EN 60684-3-151:1998 Flexible insulating sleeving Part 3: Specification for individual types of sleeving; Sheet 151: Extruded PVC/nitrile sleeving; general purpose (IEC 60684-3-151:1998); Germ

an version EN 60684-3-151:1998 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 212: Heat-shrinkable polyolefin sleevings (IEC 60684-3-212:2005); German version EN 60684-3-212:2006, Corrigenda to DIN EN 60684-3-212 (VDE 0341-3-212):2006-08; CENELEC-Corrigendum November 2006 to EN 60684-3-212:2006 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 212: Heat-shrinkable

DIN EN 560-2005

绝缘软管套.第 3 部分:各类管 套的规范.第 DIN EN 151 页 :挤压 成 60684-3-151-1999 型的聚氯乙烯/ 腈橡胶管套.一 般应用 绝缘软管套.第 3 部分:各类管 套的规范.第 DIN EN 151 页 :挤压 成 60684-3-151-1999 型的聚氯乙烯/ 腈橡胶管套.一 般应用

绝缘软管.第 3 DIN EN 部分:各种型号 60684-3-212 软管规范.活页 Berichtigung 212: 热 收 缩 聚 1-2007 烯烃软管

绝缘软套管.第 DIN EN 3 部分:各种型 60684-3-212-2006 号软管规范.活 页 212: 热 收 缩

本文来源：https://www.bwwdw.com/article/t68i.html