PS7200U-1A-A;PS7200U-1A-E3-A;PS7200U-1A-F3-A;中文规格书,Datasheet资料

Solid State Relay

OCMOS FET

PS7200U-1A

4-PIN SOP LOW OFF-STATE LEAKAGE CURRENT

NEPOC Series

1-ch Optical Coupled MOS FET

DESCRIPTION

The PS7200U-1A is a low output capacitance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side.

It is suitable for high-frequency signal control, due to its extremely low off-state leakage current, low output capacitance, and high-speed turn-on time.

FEATURES

Low off-state leakage current (ILoff = 0.1 nA TYP.) Break down voltage (VL = 80 V)

High-speed turn-on time (ton = 0.05 ms TYP.) Low output capacitance (Cout = 2.3 pF TYP.) C × R (C × R = 40 pF ) 1 channel type (1 a output)

Designed for AC/DC switching line changer

Small and thin package (4-pin SOP, Height = 2.1 mm) Low offset voltage

Ordering number of taping product : PS7200U-1A-E3, E4: 900 pcs/reel

Pb-Free product

: PS7200U-1A-F3, F4: 3 500 pcs/reel

APPLICATIONS

Measurement equipment

Document No. PN10544EJ02V0DS (2nd edition) Date Published August 2006 NS CP(K)

The mark <R> shows major revised points.

The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.

2004, 2006

PS7200U-1A

<R>

MARKING EXAMPLE (LASER MARKING)

2

Preliminary Data Sheet PN10544EJ02V0DS

<R>

ORDERING INFORMATION

Part Number

Order Number

Solder Plating Packing Style

Specification

PS7200U-1A PS7200U-1A-A Pb-Free Magazine case 100 pcs PS7200U-1A-E3

PS7200U-1A-E3-A

Embossed Tape 900 pcs/reel

PS7200U-1A-F3

PS7200U-1A-F3-A

Embossed Tape 3 500 pcs/reel

ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)

Diode

Forward Current (DC)

IFVRPD

Peak Forward Current *1

IFPMOS FET Break Down Voltage VL Continuous Load Current IL

Pulse Load Current*2

(AC/DC Connection)

ILPPDIsolation Voltage *3

Total Power Dissipation PTOperating Ambient Temperature TA 40 to +85 °C Storage Temperature

Tstg

40 to +100

°C

*1 PW = 100 µs, Duty Cycle = 1% *2 PW = 100 ms, 1 shot

*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together.

Preliminary Data Sheet PN10544EJ02V0DS

PS7200U-1A

3

RECOMMENDED OPERATING CONDITIONS (TA = 25°C)

LED Operating Current LED Off Voltage

IFVF

ELECTRICAL CHARACTERISTICS (TA = 25°C)

Voltage

VF

IF = 5 mA VR = 5 V VD = 80 V

VD = 0 V, f = 1 MHz IL = ±40 mA

IF = 5 mA, IL = ±40 mA

1.1 0.01 0.1 2.3 17

1.3

5.0 1.0 3.5 2.0 25

V

IR MOS FET Off-state Leakage Current

ILoff

µ

A

nA pF mA

Cout Coupled

LED On-state Current

IFon

Ron Time Time

*1, 2*1, 2

ton IF = 5 mA, VL = 5 V, RL = 500

9

toff≥ 0.5 ms 0.15 0.3

0.5

pF

RI-O CI-O

VI-O = 1.0 kVDC V = 0 V, f = 1 MHz

*1 Test Circuit for Switching Time

IF

Pulse Input

VL

Input monitor

VOmonitor

<R>

*2 The turn-on time and turn-off time are specified as input-pulse width ≥ 0.5 ms.

Be aware that when the device operates with an input-pulse width less than 0.5 ms, the turn-on time and turn-off time will increase.

4

Preliminary Data Sheet PN10544EJ02V0DS

TAPING SPECIFICATIONS (in millimeters)

Preliminary Data Sheet PN10544EJ02V0DS

5

6

Preliminary Data Sheet PN10544EJ02V0DS

RECOMMENDED SOLDERING CONDITIONS

(1) Infrared reflow soldering Peak reflow temperature Time of peak reflow temperature Time of temperature higher than 220°C Number of reflows Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less Three

Rosin flux containing small amount of chlorine (The flux with a Time to preheat temperature from 120 to 180°C 120±30 s

maximum chlorine content of 0.2 Wt% is recommended.)

Recommended Temperature Profile of Infrared Reflow

)

C ( T erutarepmeT ecafruS egakcaPTime (s)

(2) Wave soldering Temperature 260°C or below (molten solder temperature) Time

10 seconds or less

Preheating conditions 120°C or below (package surface temperature) Number of times One

Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)

(3) Soldering by soldering iron

Peak temperature (lead part temperature) 350°C or below Time (each pins)

3 seconds or less

Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)

(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C.

(4) Cautions Fluxes

Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

Preliminary Data Sheet PN10544EJ02V0DS

7

USAGE CAUTIONS

1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity.

8

Preliminary Data Sheet PN10544EJ02V0DS

The information in this document is current as of August, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information.

written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document.

NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.

Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information.

While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features.

NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific".

The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application.

"Standard":Computers, office equipment, communications equipment, test and measurement equipment, audio

and visual equipment, home electronic appliances, machine tools, personal electronic equipmentand industrial robots.

"Special":Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster

systems, anti-crime systems, safety equipment and medical equipment (not specifically designedfor life support).

"Specific":Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems and medical equipment for life support, etc.The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application.

(Note)

(1)"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its

majority-owned subsidiaries.

(2)"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as

defined above).

M8E 02. 11-1

Preliminary Data Sheet PN10544EJ02V0DS

9

PS7200U-1A

For further information, please contact

NEC Compound Semiconductor Devices Hong Kong Limited E-mail: contact@

Hong Kong Head OfficeTEL: +852-3107-7303FAX: +852-3107-7309 Taipei Branch OfficeTEL: +886-2-8712-0478FAX: +886-2-2545-3859 Korea Branch OfficeTEL: +82-2-558-2120FAX: +82-2-558-5209NEC Electronics (Europe) GmbH / TEL: +49-211-6503-0FAX: +49-211-6503-1327California Eastern Laboratories, Inc. / TEL: +1-408-988-3500FAX: +1-408-988-0279Compound Semiconductor Devices DivisionNEC Electronics Corporation

URL: /

0604

分销商库存信息:

CEL

PS7200U-1A-A

PS7200U-1A-E3-A

PS7200U-1A-F3-A

本文来源：https://www.bwwdw.com/article/sx64.html