诺瓦科技LED视频控制器VX4S用户手册英文版

更新时间:2023-10-17 03:28:01 阅读量: 综合文库 文档下载

说明:文章内容仅供预览,部分内容可能不全。下载后的文档,内容与下面显示的完全一致。下载之前请确认下面内容是否您想要的,是否完整无缺。

XA'I NONVSARATCE TOC H.DTL .,User's Manual

Rev1.0.0 NS160100018

LED Display Video Controller VX4S、VX4

Statement Dear users:

Welcome to use Nova's Products. We are pleased to offer this manual to help you understand and use the product. In the preparation of the manual, we try to make it accurate and reliable. Nova may revise and alter the contents of the manual at any time without notice. If you have any problems in the use, or you have any suggestions, please inform us in accordance with the contact provided in this manual. For the problems you encounter in the use, we will do our best to provide support. For your suggestions, we would like to express our thanks and make assessment as soon as possible for adoption.

Copyright

Copyright of this manual is reserved to Xi'an NovaStar Tech Co., Ltd. Any individual or organization is not allowed to copy or extract all or any part of the contents in any form without written approval.

Trademark

is the registered trademark of Nova.

XA'I NONVSARATCE TOC H.DTL .,FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

XA'ION NVSAATET RHCO C.DTL .,

User's Manual of Led Display Video Controller VX4S/VX4

Contents

1 2 3 4 5

Safety statement.................................................................................................................................. 2 Accessories ......................................................................................................................................... 2 Model description ................................................................................................................................ 2 General ................................................................................................................................................ 3 Appearance ......................................................................................................................................... 4 5.1 5.2 6 7 8 9

Front panel ............................................................................................................................... 4 Rear panel ................................................................................................................................ 5

Signal connection ................................................................................................................................ 6 Operational motion instruction ............................................................................................................ 6 Main Interface ...................................................................................................................................... 7 Operation instruction ........................................................................................................................... 8 9.1 9.2 9.3 9.4 9.5 9.6 9.7

Step1: Input Settings ................................................................................................................ 8 Step2: Screen settings ............................................................................................................. 9 Setp3: Brightness ................................................................................................................... 10 Setp4: Output Settings ............................................................................................................ 11 Display Control ....................................................................................................................... 13 Audio Settings ........................................................................................................................ 13 Advanced Settings ................................................................................................................. 14 9.7.1 9.7.2 9.7.3 9.7.4 9.7.5 9.7.6 9.7.7 9.7.8 9.7.9 9.7.11 9.8 9.9

PIP ............................................................................................................................... 14 Image Mosaic .............................................................................................................. 16 Load Cabinet Files ...................................................................................................... 17 Save to RV Card ......................................................................................................... 19 Redundancy ................................................................................................................ 20 Advanced Attribute ...................................................................................................... 20 Factory Default ............................................................................................................ 20

9.7.10 OLED Brightness......................................................................................................... 21

10 11 12 13

XFirmware Update ........................................................................................................................... 22

A'ICommunication Settings ........................................................................................................ 21 Language ............................................................................................................................... 22

ON NPresettings .................................................................................................................. 20 Custom Button ............................................................................................................. 21 Hardware Version ........................................................................................................ 21

VSAATET RHCO C.DTL .,Frequently asked questions and considerations ........................................................................... 25 Specification .................................................................................................................................. 26

Dimension ...................................................................................................................................... 28

www.novastar-led.com 1

User's Manual of Led Display Video Controller VX4S/VX4

Safety statement

To avoid potential hazards, please use this equipment according to the regulations. In case of damages, non-professionals should not open for maintenance without permission; please contact the after-sales department of the company.

High risk: The operating voltage of this product is 100-250V AC. Grounding: This production is connected to ground via the ground wire of power supply; please ensure the good grounding of grounding conductor. Electromagnetic interference: The device should be far away from magnets, motors and transformers. Moisture proof: Keep the equipment in a dry and clean environment. In case of liquid immersion, please pull the plug immediately. Away from flammable and dangerous goods. Prevent liquids or metal fragments from being immersed in the machine to avoid safety accidents. Accessories

1 2 3 4 5 One power wire One HDMI wire One VGA wire One USB wire One DVI wire Model description

Model VX4 VX4S Description (input interface type) DVI×2, VGA×3, CVBS×3, HDMI×1, DP×1 DVI×1, VGA×2, CVBS×2, HDMI×1, DP×1, SDI×1 XA'ION NVSA 6 7 8 9 AT ET RHCO C.DTL .,One SDI wire (VX4S' s Accessorie) One DP wire One User's Manual One certificate

Tips: VX4 has different type and number of interface with VX4S, but their functions are basically the same. In this manual, VX4 is described as the example.

www.novastar-led.com 2

User's Manual of Led Display Video Controller VX4S/VX4

Dimension

Fig. 13-1 VX4 's dimension(Unit:mm)

XA'ION NVSAATET RHCO C.DTL .,

www.novastar-led.com 28

User's Manual of Led Display Video Controller VX4S/VX4

XA'ION NVSAATET RHCO C.DTL .,

2) Cabinet configuration file is imported into VX4. Operation steps are shown in the figure below:

www.novastar-led.com 18

User's Manual of Led Display Video Controller VX4S/VX4

Tips: NovaLCT-Mars automatically reads the existing configuration files in the controller. The NovaLCT-Mars can perform operations such as modification of file name, adjustment order of file and delete these files.

3) Load Cabinet Files.

XA'ION NVSAATET RHCO C.DTL .,

4) Save the configuration file of cabinet into receiving card. See detailed operation in 9.7.4 Save to RV Card .

9.7.4 Save to RV Card

All current configurations of VX4 are saved into receiving card and will not be lost after power fault.

www.novastar-led.com 19

User's Manual of Led Display Video Controller VX4S/VX4

9.7.5 Redundancy

Set this controller as primary or backup mode.

9.7.6 Advanced Attribute

Including the following functions:

VGA Auto ADJ: Sampling parameters of VGA input signal are automatically adjusted so that VGA picture is clear and complete. Select this menu and then press the knob once and perform VGA automatic adjustment once. (VGA1 does not support this feature)

ADC calibration: when analog signal accesses, processors that ADC calibration is not made may have defects such as color cast or picture dark. VX4 can automatically make ADC calibration based on input analog signal (including CVBS and VGA) to solve the above problems. Select this menu and then press the knob once and perform ADC calibration once.

Go Homepage(s): The time period during which the system stops at current interface and then automatically returns to home screen when there is no operation. The system default value is 60s.

XA'ION NVSAATET RHCO C.DTL .,

9.7.7 Factory Default

VX4 is reset to factory default setting.

9.7.8 Presettings

Save the current configuration parameters as Presettings. The Presettings can be directly loaded next time, and 10 Presettings are saved by default.

www.novastar-led.com 20

User's Manual of Led Display Video Controller VX4S/VX4

9.7.9 Custom Button

The functions of custom button include Black Out, Freeze. Press Fn key to directly conduct function switch.

9.7.10 OLED Brightness

Adjust the gray scale of OLED display. The adjustment range is 0-15.

9.7.11 Hardware Version

View the hardware version of VX4. If new version has been published, LCT-Mars can be connected via PC and the hardware program of VX4 can be upgraded. View 10 Firmware Update for detailed operations.

XA'ION NVSAATET RHCO C.DTL .,

9.8 Communication Settings

Set the communication mode and network parameter of VX4.

The communication modes include USB priority and interconnected LAN (local area network) priority. When VX4 is connected to USB control and LAN control interface simultaneously, USB takes priority in the settings, adopts USB control; otherwise, LAN takes priority in the settings.

www.novastar-led.com 21

User's Manual of Led Display Video Controller VX4S/VX4

The network parameter can be set both manually and automatically. Ensure that IP address not conflict with other equipment when setting parameter manually.

9.9 Language

Firmware Update

VX4 connect to a computer , and run NovaLCT-Mars on this computer, Login as an advanced user , the password is admin, then type in admin on keyboard to open the page for updating the hardware program.

XA'ION NVSAATET RHCO C.DTL .,

www.novastar-led.com 22

本文来源:https://www.bwwdw.com/article/s52f.html

Top