5082-5521-FI000中文资料
更新时间:2023-08-13 02:35:01 阅读量: 小学教育 文档下载
元器件交易网
14.2 mm (0.56 inch)
Seven Segment DisplaysTechnical Data
HDSP-K40x SeriesHDSP-550x SeriesHDSP-552x SeriesHDSP-560x SeriesHDSP-562x SeriesHDSP-570x SeriesHDSP-572x SeriesHDSP-H15x SeriesHDSP-H40x Series
Features
Industry Standard Size Industry Standard Pinout15.24 mm (0.6 in.) DIP Leadson 2.54 mm (0.1 in.) Centers Choice of Colors
AlGaAs Red, High EfficiencyRed, Yellow, Green, Orange Excellent AppearanceEvenly Lighted SegmentsMitered Corners on SegmentsGray Package Gives OptimumContrast
±50° Viewing Angle Design Flexibility
Common Anode or CommonCathode
Single and Dual DigitsRight Hand Decimal Point±1. Overflow Character
Categorized for LuminousIntensity
Yellow and Green Categorizedfor Color
Use of Like Categories Yields aUniform Display High Light Output High Peak Current
Excellent for Long DigitString Multiplexing Intensity and ColorSelection Option
See Intensity and Color
Selected Displays Data Sheet Sunlight Viewable AlGaAs
Description
The 14.2 mm (0.56 inch) LEDseven segment displays are
designed for viewing distances up
to 7 metres (23 feet). These
devices use an industry standardsize package and pinout. Both thenumeric and ±1 overflow devicesfeature a right hand decimal
point. All devices are available aseither common anode or commoncathode.
Devices
OrangeAlGaAs RedHER
[1]HDSP-HDSP-HDSP-[1]H401H403
H151H153H157H158
K401K403
550155035507550855215523
Yellow
HDSP-570157035707570857215723
GreenHDSP-560156035607560856215623
Description
Common Anode Right Hand DecimalCommon Cathode Right Hand DecimalCommon Anode ±1. OverflowCommon Cathode ±1. Overflow
Two Digit Common Anode Right Hand DecimalTwo Digit Common Cathode Right Hand Decimal
PackageDrawing
ABCDEF
Note:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HERdata sheet for low current operation.
2
These displays are ideal for mostapplications. Pin for pinequivalent displays are also
available in a low current design.The low current displays are ideal
for portable applications. Foradditional information see theLow Current Seven SegmentDisplays data sheet.
Part Numbering System
5082 -X X X X-X X X X XHDSP-X X X X-X X X X X
Mechanical Options[1]00: No Mechanical OptionColor Bin Options[1,2]0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin LimitationMinimum Intensity Bin[1,2]
0: No Minimum Intensity Bin LimitationDevice Configuration/Color[1]1: Common Anode3: Common Cathode
Device Specific Configuration[1]Refer to Respective Datasheet
Package[1]
H: 14.2 mm (0.56 inch) Single Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearestAgilent representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
3
Package Dimensions
PIN123456789101112131415161718
A
CATHODE eCATHODE dANODE[3]
CATHODE cCATHODE DPCATHODE bCATHODE aANODE[3]
CATHODE fCATHODE gBANODE eANODE dCATHODE[4]ANODE cANODE DPANODE bANODE aCATHODE[4]ANODE fANODE gC
CATHODE cANODE c, dCATHODE bANODE a, b, DPCATHOPDE DPCATHODE aANODE a, b, DPANODE c, dCATHODE dNO PIN
FUNCTION
D
ANODE c
CATHODE c, dANODE b
CATHODE a, b, DPANODE DEANODE a
CATHODE a, b, DPCATHODE c, dANODE dNO PIN
E
E CATHODE NO. 1D CATHODE NO. 1C CATHODE NO. 1DP CATHODE NO. 1E CATHODE NO. 1D CATHODE NO. 2G CATHODE NO. 2C CATHODE NO. 2DP CATHODE NO. 2B CATHODE NO. 2A CATHODE NO. 2F CATHODE NO. 2DIGIT NO. 2 ANODEDIGIT NO. 1 ANODEB CATHODE NO. 1A CATHODE NO. 1G CATHODE NO. 1F CATHODE NO. 1F
E ANODE NO. 1D ANODE NO. 1C ANODE NO. 1DP ANODE NO. 1E ANODE NO. 2D ANODE NO. 2G ANODE NO. 2C ANODE NO. 2DP ANODE NO. 2B ANODE NO. 2A ANODE NO. 2F ANODE NO. 2
DIGIT NO. 2 CATHODEDIGIT NO. 1 CATHODEB ANODE NO. 1A ANODE NO. 1G ANODE NO. 1F ANODE NO. 1
NOTES:
1. ALL DIMENSIONS IN MILLIMETRES (INCHES).
2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.3. REDUNDANT ANODES.4. REDUNDANT CATHODES.
5. FOR HDSP-5600/-5700 SERIES PRODUCT ONLY.
4
Internal Circuit Diagram
Absolute Maximum Ratings
AlGaAs RedHDSP-H150Series
96160[1]40[2]-20 to +100[9]
HER/OrangeHDSP-5500HDSP-H40xHDSP-K40xSeries
10590[3]30[4]
YellowHDSP-5700Series
8060[5]20[6]-40 to +100
GreenHDSP-5600Series
10590[7]3018]
DescriptionAverage Power per Segment or DPPeak Forward Current perSegment or DP
DC Forward Current per Segment or DPOperating Temperature RangeStorage Temperature RangeReverse Voltage per Segment or DPLead Solder Temperature for 3 Seconds(1.60 mm [0.063 in.] below seating plane)Notes:
1. See Figure 2 to establish pulsed conditions.2. Derate above 46°C at 0.54 mA/°C.
3. See Figure 7 to establish pulsed conditions.4. Derate above 53°C at 0.45 mA/°C.
5. See Figure 8 to establish pulsed conditions.
UnitsmWmAmA°C°CV°C
-55 to +100
3.0 260
6. Derate above 81°C at 0.52 mA/°C.
7. See Figure 9 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.
9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.
5
Electrical/Optical Characteristics at TA = 25°CAlGaAs Red
DeviceSeriesHDSP- Parameter
Luminous Intensity/Segment[1,2,5] (Digit Average)
Forward Voltage/Segment or DP
H15X
Peak WavelengthDominant Wavelength[3]
Reverse Voltage/Segment or DP[4]Temperature Coefficient ofVF/Segment or DP
Thermal Resistance LED Junction-to-Pin
λPEAKλdVR VF/°CRθJ-Pin
3.0
64563715-2400
nmnmVmV/°C°C/W/Seg
IR = 100 µA
SymbolIV
Min.9.1
Typ.16.01.8
VF
2.0
3.0
V
IF = 100 mA
Max.
Unitsmcd
Test ConditionsIF = 20 mAIF = 20 mA
High Efficiency Red
DeviceSeriesHDSP- Parameter
Luminous Intensity/Segment[1,2,6]
(Digit Average)
SymbolIV
Min.900
Typ.2800
Max.Unitsµcd
Test ConditionsIF = 10 mAIF = 60 mA Peak:1 of 6 df
37002.1635626
3.0
30-2345
2.5
VnmnmVmV/°C°C/W/Seg
Forward Voltage/Segment or DP
55XX
Peak WavelengthDominant Wavelength[3]
Reverse Voltage/Segment or DP[4]Temperature Coefficient ofVF/Segment or DP
Thermal Resistance LED Junction-to-Pin
VFλPEAKλdVR VF/°CRθJ-Pin
IF = 20 mA
IR = 100 µA
6
Yellow
DeviceSeriesHDSP- Parameter
Luminous Intensity/Segment[1,2] (Digit Average)
Forward Voltage/Segment or DP
57XX
Peak WavelengthDominant Wavelength[3,7]
Reverse Voltage/Segment or DP[4]Temperature Coefficient ofVF/Segment or DP
Thermal Resistance LED Junction-to-Pin
SymbolIV
2750
VFλPEAKλdVR VF/°CRθJ-Pin
581.53.0
2.158358640-2345
592.52.5
VnmnmVmV/°C°C/W/Seg
IR = 100 µA
Min.600
Typ.1800
µcd
IF = 60 mA Peak:1 of 6 dfIF = 20 mA
Max.
Units
Test ConditionsIF = 10 mA
Orange
DeviceSeriesHDSP- Parameter
Luminous Intensity/Segment(Segment Average)[1,2]
Forward Voltage/Segment or DPPeak Wavelength
H40xK40x
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]Temperature Coefficient ofVF/Segment or DP
Thermal Resistance LED Junction-to-Pin
SymbolIVVFλPEAKλdVR VF/°CRθJ-Pin
3.0Min.
Typ.2.372.160060330-2345
2.5Max.
UnitsmcdVnmnmVmV/°C°C/W/Seg
IF = 10 mAIR = 100 µATest ConditionsIF = 10 mAIF = 20 mA
7
High Performance Green
DeviceSeries
HDSP-Parameter
Luminous Intensity/Segment[1,2] (Digit Average)`
Forward Voltage/Segment or DP
56XX
Peak WavelengthDominant Wavelength[3,7]
Reverse Voltage/Segment or DP[4]Temperature Coefficient ofVF/Segment or DP
Thermal Resistance LED Junction-to-Pin
SymbolIV
3100
VFλPEAKλdVR VF/°CRθJ-Pin
3.0
2.156657150-2345
5772.5
VnmnmVmV/°C°C/W/Seg
IR = 100 µA
Min.900
Typ.
2500
µcd
IF = 60 mA Peak:1 of 6 dfIF = 10 mA
Max.
Units
Test ConditionsIF = 10 mA
Notes:
1. Device case temperature is 25°C prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color ofthe device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and arepin for pin compatible with the HDSP-H15X series.
6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pinfor pin compatible with the HDSP-550X series.
7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated bya number adjacent to the luminous intensity category letter.
AlGaAs Red
Figure 1. Maximum Tolerable Peak Current vs.Pulse Duration – Red.Figure 2. Maximum Tolerable Peak Currentvs. Pulse Duration – AlGaAs Red.
A
m – T50NEM45GES40 REP35 TNE30RRU25C CD20 MU15MIX10AM –5 .XA0
M CDITA – AMBIENT TEMPERATURE – °CFigure 3. Maximum Allowable DC Current vs.Ambient Temperature.YT)
ISANm E0T2N TI AS U1 OONT IMDUELZI ELVAITMARLOEN(R0
5
10
15
20
25
30
35
40
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 5. Relative Luminous Intensityvs. DC Forward Current.HER, Yellow, Green, Orange
Figure 7. Maximum Tolerable Peak Current
vs. Pulse Duration – HER, Orange.8
A
m – TNEMGES REP TNERRUC DRAWROF – FIVF – FORWARD VOLTAGE – V
Figure 4. Forward Current vs.Forward Voltage.
Y
CNEICIFFE EVITALER DEZI
LAMRON – KAEPη
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 6. Relative Efficiency (Luminous Intensity perUnit Current) vs. Peak Current.
Figure 8. Maximum Tolerable Peak Currentvs. Pulse Duration – Yellow.
9
50
I C MAX – MAXIMUM DC CURRENT DPER SEGMENT – mA
45403530252015105020
30
40
5060
708090100110120
T – AMBIENT TEMPERATURE – °CA
Figure 9. Maximum Tolerable Peak
Current vs. Pulse Duration – Green.Figure 10. Maximum Allowable DC Current vs.Ambient Temperature.
IF – FORWARD CURRENT PER SEGMENT – mA
ηV – RELATIVE EFFICIENCY(NORMALIZED TO 1 AT 10 mA PER SEGME
NT)
RELATIVE LUMINOUS INTENSITY(NORMALIZED AT 10 mA)
1.61.51.41.31.21.11.00.90.80.70.6
10
20
30
40
50
60
70
80
90100
VF – FORWARD VOLTAGE – V
IF – DC FORWARD CURRENT – mA
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 11. Forward Current vs.Forward Voltage.Figure 12. Relative Luminous
Intensity vs. DC Forward Current.
Figure 13. Relative Efficiency(Luminous Intensity per UnitCurrent) vs. Peak Current.
Electrical/Optical
For more information on
electrical/optical characteristics,please see Application Note 1005.
(methylene chloride, trichloro–ethylene, carbon tetrachloride,etc.) are not recommended forcleaning LED parts. All of thesevarious solvents attack or dissolvethe encapsulating epoxies used toform the package of plastic LEDparts.
For information on solderingLEDs please refer to ApplicationNote 1027.
Contrast Enhancement
For information on contrast
enhancement please seeApplication Note 1015.
Soldering/Cleaning
Cleaning agents from the ketonefamily (acetone, methyl ethylketone, etc.) and from the
chlorinated hydrocarbon family
元器件交易网
Intensity Bin Limits (mcd)AlGaAs Red
Min.
Max.
K9.2016.90L13.8025.30M20.7038.00N31.1056.90O46.60
85.40
HER
Min.
Max.
E0.911.67F1.372.51G2.053.76H3.085.64I4.628.64J6.9312.70K10.39
19.04
Yellow
Min.
Max.
D0.611.11E0.911.67F1.372.51G2.053.76H3.085.64I4.628.64J6.9312.70K10.39
19.04
Green
Min.
Max.
E0.911.67F1.372.51G2.053.76H3.085.64I4.61
8.46
10
Orange
Min.
Max.
B0.771.17C0.951.45D1.191.82E1.492.27F1.852.89G2.323.54H2.90
4.43
Color Categories
Note:
All categories are established for classification of products. Productsmay not be available in all categories. Please contact your Agilentrepresentatives for further clarification/information.
元器件交易网
/semiconductors
For product information and a complete list ofdistributors, please go to our web site.For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or(408) 654-8675
Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 271 2451
India, Australia, New Zealand: (+65) 271 2394Japan: (+81 3) 3335-8152(Domestic/Interna-tional), or 0120-61-1280(Domestic Only)Korea: (+65) 271 2194
Malaysia, Singapore: (+65) 271 2054Taiwan: (+65) 271 2654Data subject to change.
Copyright © 2002 Agilent Technologies, Inc.Obsoletes 5988-0383ENJanuary 17, 20025988-4273EN
正在阅读:
5082-5521-FI000中文资料08-13
湖南省湘西土家族苗族自治州2018年中考物理真题试题Word版含答案01-28
幼儿园中班第十一周教案210-24
近期PE新闻热点08-31
辣椒发芽的观察日记11-21
忏悔录奥古斯丁02-18
喝酒不伤身七个提示03-24
- 通信原理实验报告
- 2016年上半年安徽省临床医学检验技术中级技师职称试题
- 传智播客刘意老师JAVA全面学习笔记
- 星级酒店客房部保洁服务标准与工作流程操作规范 - PA新员
- 算法竞赛入门经典授课教案第1章 算法概述
- 《微信公众平台架起家校互通桥》结题报告
- 2018年宁夏银川市高考数学三模试卷(理)Word版含解析
- 大学生创业基础 - 尔雅
- 2016年6月英语六级真题写作范文3套
- 中国磁性材料纸行业专项调查与发展策略分析报告(2015-2020)
- 云南省2018届高三普通高中学业水平考试化学仿真试卷二Word版缺答案
- 窗函数法设计低通滤波器
- 第三章 绩效考评方法与绩效管理模式
- 高等数学教案
- 个人独资合伙企业习题及答案
- 小学语文沪教版三年级上册第六单元第30课《想别人没想到的》公开课优质课教案比赛讲课获奖教案
- 曳引钢丝绳及其他曳引系统校核计算 - 图文
- 淮阴工学院管理学期末试卷7 - 图文
- 受力分析方法(1)
- 2013-2014学年陕西省西安市西工大附小五年级(上)期末数学试卷及解析
- 中文
- 资料
- 5082
- 5521
- 000
- FI
- 机构户(法人证明书、授权委托书)
- 浙江省2009年1月自考电算化会计信息系统试题
- 742-农业部办公厅文件
- 大方县住房和城乡建设局转发其实做好当前安全生产通知
- 2016-2022年中国化妆品终端渠道市场深度调查与投资前景分析告
- 第十章 商务沟通中的跨文化
- 计算机辅助高频电路模型模拟分析方法及系统
- 医学科研方法与论文写作结业考试满分卷
- 氨基酸结构式
- 世界新闻史重点
- 2015年会计从业资格考试《会计电算化》每日一练(1月22日)
- Ce基非晶合金制备及室温变形行为的研究_罗茂良
- 煤矿安全生产工作承诺书
- 2016(新人教版)七年级数学下册期末测试卷三
- 小班美术活动
- 线面垂直与面面垂直全面复习
- 双代会学习心得
- 摄像头常见故障排除
- 病理大体标本制作技术
- 2005年6月福建高中会考生物试题