行业标准规范英汉对照-工艺装备

301 GB/T 9215-1988 硬质合金锥形尖头旋转锉 Conical pointed-nose hardmetal burrs

302 GB/T 9216-1988 硬质合金倒锥形旋转锉 Inverted cone hardmetal burrs 303 GB/T 9217-1988 硬质合金旋转锉技术条件 Hardmetal burrs technical specifications

304 GB/T 9258-1988 涂附磨具用磨料微粉粒度及其组成 Grain size and grain size distribution of microgrits for coated abrasives

305 GB/T 9453-1988 锻模及其零件术语 Terminology of forging dies and elements

306 GB/T 10635-1989 螺钉旋具通用技术条件 Screwdrivers—General technical requirements

307 GB/T 10636-1989 螺钉旋具试验方法 Screwdrivers—Test methods

308 GB/T 10686-1989 铜合金工具防爆性能试验方法 Testing method of copper alloy tools for explosive atmospheres

309 GB/T 10919-1989 矩形花键量规 Gauges for straight-sided splines 310 GB/T 10920-1989 普通螺纹量规 型式和尺寸 Types and dimensions of gauges for general purpose screw threads

311 GB/T 10922-1989 非螺纹密封的管螺纹量规 Gauges for pipe threads where pressure-tight joints are not made on the threads

312 GB/T 10932-1989 螺纹千分尺 Thread micrometers

313 GB/T 10943-1989 1/4 圆锥量规 Gaugers of 1/4 tapers

314 GB/T 10944-1989 自动换刀机床用7:24圆锥工具柄部40、45和50号圆锥柄 Tool shanks with 7:24 taper for automatic tool changers—Shanks Nos. 40, 45 and 50

315 GB/T 10945-1989 自动换刀机床用7:24圆锥工具柄部40、45和50号圆锥柄用拉钉 Tool shanks with 7:24 taper for automatic tool

changers—Retention knobs for shanks Nos. 40, 45 and 50

316 GB/T 10946-1989 硬质合金锥柄麻花钻 Taper shank twist drills with carbide tips

317 GB/T 10947-1989 硬质合金麻花钻通用技术条件 General technical specifications for twist drill with carbide tips

318 GB/T 10948-1989 硬质合金直柄T形槽铣刀 Parallel shank T-slot cutters with carbide tips

319 GB/T 10949-1989 硬质合金锥柄T形槽铣刀 Taper shank T-slot cutters with carbide tips

320 GB/T 10952-1989 矩形花键滚刀 Hobs for parallel side splines 321 GB/T 10953-1989 机夹切断车刀 Cutting-off tools for turning with clamp tips

322 GB/T 10954-1989 机夹外螺纹车刀 Turning tools for external threads with clamp tips

323 GB/T 10955-1989 机夹内螺纹车刀 Turning tools for internal threads with clamp tips

324 GB/T 11270-1989 金刚石圆锯片 Diamond circular saw blades

325 GB/T 11853-1989 莫氏与公制圆锥量规 Gauges of Morse tapers and metric

tapers

326 GB/T 11854-1989 7:24工具圆锥量规 Gauges of 7:24 tapers

327 GB/T 11855-1989 钻夹圆锥量规 Gauges of drill chuck tapers 328 GB/T 11880-1989 模锻锤和大型机械锻压机用模块技术条件 Large die-blocks used for die-forging hammer and mechanical forging press--Specification

329 GB/T 12204-1990 金属切削 基本术语 Glossary of general terms in metal cutting

330 GB/T 12520-1990 高扭矩十字槽 Offset cruciform recess for rotary fastening devices

331 GB/T 12868-1991 机床夹具零件及部件 T型槽用螺母 The parts and units of jigs and fixtures--T-slot nut

332 GB/T 12869-1991 机床夹具零件及部件 双头螺拴 The parts and units of jigs and fixtures—Double end stud

333 GB/T 12870-1991 机床夹具零件及部件 槽用螺栓 The parts and units of jigs and fixtures—Slat bolt

334 GB/T 12871-1991 机床夹具零件及部件 快换垫圈 The parts and unidts of jigs and fixtures—Smooth faceclamp plate

335 GB/T 12872-1991 机床夹具零件及部件 自调式压板 The parts and units of jigs and fixtures—Self-regulating pressure plate

336 GB/T 12873-1991 机床夹具零件及部件 薄壁钻套 The parts and units of jigs and fixtures—Thin wall drill bush

337 GB/T 12874-1991 机床夹具零件及部件 车床用定位轴 The parts and units of jigs and fixtures—Positioning shaft for lathe

338 GB/T 12875-1991 机床夹具零件及部件 锥度芯轴 The parts and units of jigs and fixtures—Taper memdred

339 GB/T 12876-1991 机床夹具零件及部件 可调定心内涨器 The parts and units of jigs and fixtures—Variable centering inner expansion-gear 340 GB/T 12877-1991 机床夹具零件及部件 可调支座 The parts and units of jigs and fixtures—Adjustable pedestal

341 GB/T 12878-1991 机床夹具零件及部件 内拨顶尖 The parts and units of jigs and fixtures—Inside draftcentre

342 GB/T 12879-1991 机床夹具零件及部件 夹持式内拨顶尖 The parts and units of jigs and fixtures—Holding inside draft centre

343 GB/T 12880-1991 机床夹具零件及部件 外拨顶尖 The parts and units of jigs and fixtures—Outside draft centre

344 GB/T 12881-1991 机床夹具零件及部件 内锥孔顶尖 The parts and units of jigs and fixtures—Inner taper hole centre

345 GB/T 12882-1991 机床夹具零件及部件 夹持式内锥孔顶尖 The parts and units of jigs and fixtures—Holding inner taper hole centre

346 GB/T 12883-1991 机床夹具零件及部件 鸡心卡头 The parts and units of jigs and fixtures—Peach-shapedpawl

347 GB/T 12884-1991 机床夹具零件及部件 卡环 The parts and units of jigs and fixtures—Snap ring

348 GB/T 12885-1991 机床夹具零件及部件 夹板 The parts and units of jigs and fixtures—Clamp plate

349 GB/T 12886-1991 机床夹具零件及部件 车床用快换卡头 The parts and units of jigs and fixtures—Quick powl for lathe

350 GB/T 12887-1991 机床夹具零件及部件 磨床用快换卡头 The parts and units of jigs and fixtures—Quick powl for grinder

351 GB/T 12888-1991 机床夹具零件及部件 活铁爪 The parts and units of jigs and fixtures—Soft jaws

352 GB/T 12889-1991 机床夹具零件及部件 拨盘 The parts and units of jigs and fixtures—Driving plate

353 GB/T 12890-1991 机床夹具零件及部件 花盘 The parts and units of jigs and fixtures—Face plate

354 GB/T 12891-1991 机床夹具零件及部件 三爪卡盘用过渡盘 The parts and units of jigs and fixtures—Transitionalplate for 3-jaw chuck

355 GB/T 12892-1991 机床夹具零件及部件 四爪卡盘用过渡盘 The parts and units of jigs and fixtures—Transitionalplate for 4-jaw chuck

356 GB/T 12893-1991 机床夹具零件及部件 等边角铁 The parts and units of jigs and fixtures—Equal angles

357 GB/T 12894-1991 机床夹具零件及部件 等腰角铁 The parts and units of jigs and fixtures—Isosceles angles

358 GB/T 12895-1991 机床夹具零件及部件 不等边角铁 The parts and units of jigs and fixtures—Unequal angles

359 GB/T 12896-1991 机床夹具零件及部件 档柱 The parts and units of jigs and fixtures—Stopper

360 GB/T 13473-1992 钢锤通用技术条件 Steel hammers—General technical requirements

361 GB/T 14297-1993 可转位内孔车刀 Boring bars for indexable inserts 362 GB/T 14298-1993 可转位螺旋立铣刀 Helical end milling cutters with indexable inserts

363 GB/T 14299-1993 可转位螺旋沟浅孔钻 Spiral flute drill with indexable inserts

364 GB/T 14300-1993 可转位直沟浅孔钻 Straight flute drill with indexable inserts

365 GB/T 14301-1993 整体硬质合金锯片铣刀 Solid carbide slitting cutters 366 GB/T 14319-1993 超精油石 Superfinishing stone

367 GB/T 14320-1993 陶瓷结合剂强力珩磨油石 Vitrified force-honing stone 368 GB/T 14321-1993 刚玉磨料中α-Al2O3相X射线定量测定方法 Testing method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer

369 GB/T 14322-1993 普通磨料精微粉(W3.5～W0.5)粒度组成测定方法

Determination for grain size distribution of microgrits W3.5 to W0.5 of conventional abrasive

370 GB/T 14328.1-1993 直柄粗加工立铣刀 型式与尺寸 Roughing end mill

with parallel shank types and dimensions

371 GB/T 14328.2-1993 削平型直柄粗加工立铣刀 型式与尺寸 Roughing end mill with flatted parallel shank types and dimensions

372 GB/T 14328.3-1993 莫氏锥柄粗加工立铣刀 型式与尺寸 Roughing end mill with morse taper shank types and dimensions

373 GB/T 14328.4-1993 粗加工立铣刀 技术条件 Roughing end mills technical specifications

374 GB/T 14329.1-1993 平刀体键槽拉刀 型式与尺寸 Flat body keyway broach types and dimensions

375 GB/T 14329.2-1993 加宽平刀体键槽拉刀 型式与尺寸 Widened flat body keyway broach types and dimensions

376 GB/T 14329.3-1993 带倒角齿键槽拉刀 型式与尺寸 Keyway broach with chamfer types and dimensions

377 GB/T 14329.4-1993 键槽拉刀通用技术条件 Technical specifications for keyway broaches

378 GB/T 14330-1993 硬质合金机夹三面刃铣刀 Machanically clamped carbide side milling cutters

379 GB/T 14332-1993 硬质合金喷吸钻 Ejector drills with carbide tips 380 GB/T 14333-1993 盘形剃齿刀 Rotary gear shaving cutters

381 GB/T 14348.1-1993 双圆弧齿轮滚刀 型式和尺寸 The basic types and dimensions of hobs for double--circular-arc gear

382 GB/T 14348.2-1993 双圆弧齿轮滚刀 技术条件 The general technical specifications of hobs for double circular-arc gear

383 GB/T 14661-1993 可转位A型刀夹 Type A cartridges for indexable inserts

384 GB/T 14662-1993 冲模技术条件 Specification of the press tools 385 GB/T 14764-1993 手用钢锯条 Hand hacksaw blades

386 GB/T 14765-1993 十字柄套筒扳手 Four-way socket wrenches

387 GB/T 14895-1994 金属切削刀具术语 切齿刀具 Terms in metal cutting tools--Gear cutters

388 GB/T 14899-1994 电子数显卡尺 Calipers with electronic digital display

389 GB/T 15305.1-1994 涂附磨具 页状砂布砂纸 尺寸和公差 Coated abrasives--Abrasive sheets--Dimensions and tolerances

390 GB/T 15305.2-1994 涂附磨具 卷状砂布 砂纸 尺寸和公差 Coated abrasives--Abrasive rolls--Dimensions and tolerances

391 GB/T 15305.3-1994 涂附磨具 砂带 尺寸和公差 Coated

abrasives--Abrasive belts--Dimensions and tolerances

392 GB/T 15305.4-1994 涂附磨具 砂盘 尺寸和公差 Coated

abrasives--Abrasive discs--Dimensions and tolerances

393 GB/T 15306.1-1994 陶瓷可转位刀片 无孔刀片尺寸(G级) Indexable inserts for cutting tools--Ceramic inserts with rounded

corners--Dimensions of inserts without fixing hole(Class G)

394 GB/T 15306.2-1994 陶瓷可转位刀片 带孔刀片尺寸 Indexable inserts for

cutting tools--Ceramic inserts with rounded corners--Dimensions of inserts with cylindrical fixing hole

395 GB/T 15306.3-1994 陶瓷可转位刀片 无孔刀片尺寸(U级) Indexable inserts for cutting tools--Ceramic inserts with rounded

corners--Dimensions of inserts without fixing hole(Class U)

396 GB/T 15306.4-1994 陶瓷可转位刀片 技术条件 Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Specifications 397 GB/T 15307-1994 可转位钻头用削平型直柄 Drills with indexable inserts--Cylindrical shanks with a parallel flat

398 GB/T 15729-1995 扭力扳手通用技术条件 Torque wrench--General requirements

399 GB/T 15730-1995 电讯夹扭钳和剪切钳通用技术条件 Pliers and nippers for electronics--General technical requirements

400 GB/T 15824-1995 热作模具钢热疲劳试验方法 Thermal fatigue testing method for hot die steel

~

401 GB/T 16452-1996 电讯夹扭钳和剪切钳术语 Pliers and nippers for electronics--Nomenclature

402 GB/T 16455-1996 条式和框式水平仪 Bar form and square levels

403 GB/T 16456.1-1996 硬质合金螺旋齿立铣刀 第1部分：直柄立铣刀 型式和尺寸 End mills with brazed helical hardmetal tips--Part 1: Dimensions of end mills with parallel shank

404 GB/T 16456.2-1996 硬质合金螺旋齿立铣刀 第2部分: 7: 24锥柄立铣刀 型式和尺寸 End mills with brazed helical hardmetal tips--Part 2: Dimensions of end mills with 7:24 taper shank

405 GB/T 16456.3-1996 硬质合金螺旋齿立铣刀 第3部分: 莫氏锥柄立铣刀 型式和尺寸 End mills with brazed helical hardmetal tips--Part 3: Dimensions of end mills with morse taper shank

406 GB/T 16456.4-1996 硬质合金螺旋齿立铣刀 第4部分: 技术条件 End mills with brazed helical hardmetal tips--Part 4: Technical specifications 407 GB/T 16457-1996 超硬磨料制品 切割石材和建筑物用锯片 钢基体尺寸 Abrasive products--Segmented saws for machining of stone and masonry cutting--Dimensions of steel blades

408 GB/T 16458.1-1996 磨料磨具术语 第1部分: 磨料术语 Terminologry for abrasives and abrasive products--Part 1: Terminology for abrasives 409 GB/T 16458.2-1996 磨料磨具术语 第2部分: 磨具术语 Terminologry for abrasives and abrasive products--Part 2: Terminology for abrasives products

410 GB/T 16459-1996 面铣刀寿命试验 Tool life testing in face milling 411 GB/T 16460-1996 立铣刀寿命试验 Tool life testing in end milling 412 GB/T 16461-1996 单刃车削刀具寿命试验 Tool-life testing with single-point turning tools

413 GB/T 16770.1-1997 整体硬质合金直柄立铣刀 第1部分: 型式与尺寸 Solid hardmetal end mills with parallel shank Part 1: Dimensions 414 GB/T 16770.2-1997 整体硬质合金直柄立铣刀 第2部分：技术规范 Solid hardmetal end mills with parallel shank Part 2: Technical specifications 415 GB/T 6139-1997 阶梯麻花钻 技术条件 Subland twist drills--Technical specifications

416 GB/T 6138.1-1997 攻丝前钻孔用阶梯麻花钻 第1部分: 直柄阶梯麻花钻的型式和尺寸 Subland twist drills for holes prior to tapping screw threads Part 1: The types and dimensions for subland twist drills with parallel shanks

417 GB/T 6138.2-1997 攻丝前钻孔用阶梯麻花钻 第2部分: 莫氏锥柄阶梯麻花钻的型式和尺寸 Subland twist drills for holes prior to tapping screw threads Part 2: The types and dimensions for subland twist drills with Morse shanks

418 GB/T 1112.1-1997 键槽铣刀 第1部分: 直柄键槽铣刀 型式和尺寸 Slot drills Part 1: Milling cutters with parallel shanks-Dimensions

419 GB/T 1112.2-1997 键槽铣刀 第2部分: 莫氏锥柄键槽铣刀 型式和尺寸 Slot drills--Part 2: Milling cutters with Morse taper shanks-Dimensions 420 GB/T 1112.3-1997 键槽铣刀 第3部分: 技术条件 Slot drills--Part 3: Technical specifications

421 GB/T 1127-1997 半圆键槽铣刀 Cutters for woodruff keyseats 422 GB/T 17111-1997 切削刀具--高速钢分组代号 Cutting

tools--Designation of high-speed steel groups

423 GB/T 17112-1997 定心钻 Spot drills

424 GB/T 17163-1997 几何量测量器具术语 基本术语 Glossary of terms used in dimensional measuring instruments--General terms

425 GB/T 17164-1997 几何量测量器具术语 产品术语 Glossary of terms used in dimensional measuring instruments--Product terms

426 GB/T 6320-1997 杠杆齿轮比较仪 Mechanical dial comparators

427 GB/T 4127-1997 普通磨具 形状和尺寸 Shapes and dimensions for bonded abrasive products

428 GB/T 2485-1997 普通磨具 砂轮 技术条件 Bonded abrasive products Grinding wheel Technical specifications

429 GB/T 2486-1997 普通磨具 磨头 技术条件 Bonded abrasive products Mounted wheel Technical specifications

430 GB/T 2075-1998 切削加工用硬切削材料的用途 切屑形式大组和用途小组的分类代号 Application of hard cutting materials for machining by chip removal--Designation of the main groups of chip removal and groups of application

431 GB/T 4440-1998 活扳手 Adjustable wrenches

432 GB/T 4625-1998 螺钉和螺母的装配工具术语 Assembly tools for screws and nuts-nomenclature

433 GB/T 5356-1998 内六角扳手 Hexagon socket screw keys

434 GB/T 5357-1998 内六角花形扳手 Hexagon spline wrenches

435 GB/T 5358-1998 内六角花形螺钉旋具 Hexagon spline screwdrivers 436 GB/T 1114.1-1998 套式立铣刀 第1部分: 型式与尺寸 Shell end mills--Part 1: Dimensions

437 GB/T 1114.2-1998 套式立铣刀 第2部分: 技术条件 Shell end mills--Part 2: Tachnical specifications

438 GB/T 6080.1-1998 机用锯条 第1部分: 型式与尺寸 Machine hacksaw blades Part 1: Dimensions

439 GB/T 6080.2-1998 机用锯条 第2部分: 技术条件 Machine hacksaw blades Part 2: Technical specifications

440 GB/T 6078.1-1998 中心钻 第1部分: 不带护锥的中心钻-A型 型式和尺寸 Centre drills Part 1: Centre drills for centre holes without protecting chamfers-Type A Dimensions

441 GB/T 6078.2-1998 中心钻 第2部分: 带护锥的中心钻-B型 型式和尺寸 Centre drills Part 2: Centre drills for centre holes with protecting chamfers--Type B Dimensions

442 GB/T 6078.3-1998 中心钻 第3部分: 弧形中心钻-R型 型式和尺寸 Centre drills Part 3: Centre drills for centre holes with radius form--Type R Dimensions

443 GB/T 6078.4-1998 中心钻 第4部分: 技术条件 Center drills Part 4: Technical specifications

444 GB/T 8123-1998 杠杆指示表 Dial test indicators

445 GB/T 17588-1998 砂轮磨削 基本术语 Basic terminology for grinding processes using grinding wheels

446 GB/T 2481.1-1998 固结磨具用磨料 粒度组成的检测和标记 第1部分: 粗磨粒 F4~F220 Bonded abrasives--Determination and designation of grain size distribution--Part 1: Macrogrits F4 to F220

447 GB/T 2481.2-1998 固结磨具用磨料 粒度组成的检测和标记 第2部分: 微粉F230~F1200 Bonded abrasives--Determination and designation of grain size distribution--Part 2: Microgrits F230 to F1200

本文来源：https://www.bwwdw.com/article/qqw1.html