英文-MSDS水泥基防水材料

更新时间:2024-06-15 02:12:01 阅读量: 综合文库 文档下载

说明:文章内容仅供预览,部分内容可能不全。下载后的文档,内容与下面显示的完全一致。下载之前请确认下面内容是否您想要的,是否完整无缺。

MATERIAL SAFETY DATA SHEET

_______________________________________________________

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Material Identity

Product Name: cement base waterproofing material General or Generic ID:

Appearance: cement grey powder Odor: weak odor

Company Identification

Shanghai ChangYao chemical Co., LTD

2. Composition/Information on Ingredient : the mixture the solid is powdery

Ingredient name CAS NO % EC NO Classification Quartz(Sio2) 14808-60-7 50-75 238-878-4 not classified(1) Cement 65997-15-1 25-35 266-043-4 xi;R41,R37/38(1)(2) See section 16 for the full text of the rphrases declared above (1) substance classified with a health or environmental hazard (2) substance with a workplace exposure limit

occupational exposure limits,if available,are listed in section 8

_______________________________________________________________________________ 3. Hazards Identification EMERGENCY OVERVIEW

Caution: Avoid contact and inhalation.

Target organ(s): skin. Eyes respiratory system.

For additional information on toxicity, please refer to Section 11.

_______________________________________________________________________________ 4. First Aid Measures ORAL EXPOSURE

Do not induce vomiting unless directed to do so by medical personnel.Maintain an open airway. Seek immediate medical attention INHALATION EXPOSURE Get medical attention SKIN EXPOSURE

Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Continue to rinse for at least 10 minutes. Obtain medical attention if symptoms occur EYE EXPOSURE

Get medical attention immediately. immediately flush eyes with plenty of water,

occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Chemical burns must be treated promptly by a physician ______________________________________________________________________________ 5 - Fire Fighting Measures FLASH POINT

N/A

AUTOIGNITION TEMP N/A

FLAMMABILITY N/A

EXTINGUISHING MEDIA

Suitable: use an extionuishing agent sitable for the surrounding fire Not suitable:none known

Special exposure hazards:no specific fire or explosion hazard FIRE FIGHTING

Protective Equipment: the fire-fighters should wear appropriate protective equipment and

self-contained breathing apparatus(SCBA) with a full face-piece operated in positive pressure mode.

Specific Hazard(s): Emits toxic fumes under fire conditions.

_______________________________________________________________________________ 6. Accidental Release Measures PERSONAL PRECAUTIONS

Keep unnecessary and unprotected personnel from entering. Do not touch or walk through split material. Avoid breathing dust. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment ENVIRONMENTAL PRECAUTIONS

Avoid dispersal of spilt material and runoff and contact with soil,waterways,drains and sewers. Inform the relevant authorities if the product has caused environmental pollution(sewers,waterways,soil or air) LARGE SPILL

Move containers from spill area. Prevent entry into sewers,water courses, basements or confined area, Vacuum or sweep up material and place in a designated,labeled waste container. Avoid creating dusty conditions and prevent wind dispersal SMALL SPILL

Move container from spill area. Vacuum or sweep up material and place in a designated, labeled waste container

_____ ________________________________________________________________

7. Handling and Storage HANDLING

Put on appropriate personal protective equipment.Eating drinking and smoking should be prohibited in areas where this material is handled,stored and processed.Workeds should wash hands and face before eating,drinking and shoking,Do not get in eyes or on skin or clothing,DO not breathe dust,Use only with adequate ventilation,Wear appropriate respirator when ventilation is inadequate.Keep in the original container or an approved alternative made from a compatible material,kept tightly closed when not in use,Emptycontainers retain product residue and can be hazardous STORAGE

Store in accordance with local regulations.Store in original container protected from direct

sunlight in a dry,cool and well-ventilated atea,away from incompatible materials and food and drink.Keep container tightly closed and sealed until ready for use.Container that have been opened must be carefully resealed and kept upright to prevemt leasage.Do not store in unlabelled containers.Yse appropriate containment to avoid environmental contamination PACKAGING MATERIALS RECOMMENDED Use original container

____ __________________________________________________________________ 8. Exposure Controls / PPE ENGINEERING CONTROLS

Mechanical exhaust required. Safety shower and eye bath. PERSONAL PROTECTIVE EQUIPMENT

Other: Wear appropriate government approved respirator, chemical-resistant gloves, safety goggles, other protective clothing.

GENERAL HYGIENE MEASURES Discard contaminated clothing and shoes.

_______________________________________________________________________________ 9. Physical/Chemical Properties Appearance powder

Property Value At Temperature or Pressure Molecular Weight N/A pH N/A

BP/BP Range N/A MP/MP Range N/A Freezing Point N/A Vapor Pressure N/A Vapor Density N/A

Saturated Vapor Conc. N/A SG/Density N/A Bulk Density N/A Odor Threshold N/A Volatile% N/A VOC Content N/A Water Content N/A Solvent Content N/A Evaporation Rate N/A Viscosity N/A

Surface Tension N/A Partition Coefficient N/A Decomposition Temp. N/A Flash Point N/A

Explosion Limits N/A Flammability N/A

Autoignition Temp N/A

Refractive Index N/A Optical Rotation N/A Miscellaneous Data N/A Solubility N/A N/A = not available

_______________________________________________________________________________ 10. Stability and Reactivity STABILITY

Stable: Stable. Under normal conditions of storage of storage and use,hazardous polymerization will not occur.

Materials to Avoid: No Specific data.

HAZARDOUS DECOMPOSITION PRODUCTS

Under Normal conditions of storage and use,hazardous decomposition products should not be produced.

HAZARDOUS POLYMERIZATION Hazardous Polymerization: Will not occur

_______________________________________________________________________________ 11. Toxicological Information ROUTE OF EXPOSURE

Skin Contact: Irritation to skin.

Eye Contact: Severely irritating to eyes,Risk of serious damage to eyes Inhalation: Irritating to respiratory system

Ingestion:Irritating to mouth,throat and stomach

Multiple Routes: May be harmful by inhalation, ingestion, or skin absorption.

TARGET ORGAN(S) OR SYSTEM(S)

Eyes. Respiratory system.Mouth.Skin, Stomach,Throat SIGNS AND SYMPTOMS OF EXPOSURE

To the best of our knowledge, the chemical, physical, and

toxicological properties have not been thoroughly investigated.

12.Ecological information

.Ecotoxical effects: Avoid contact of spilt material and runoff with soil and surface waterways.Do not empty into drains;dispose of this material and its container in a safe way

______________________________________________________________________________ 13. Disposal Considerations METHODS OF DISPOSAL

The generation of waste should be avoided or minimized wherever possible.Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.Disposal of this product,solution and anyby-products should at all times comply with the requirements of environmental protection and wast disposal legislation and any regional local authority requirements.Avoid dispersal of spilt material and runoff and contct with soil,waterways,drains and sewers.

EUROPEAN WASTE CATALOGUE(EWC)

17 01 01 concrete PACKAGING

Completely emptied packagings may be given for recycling. Empty packaging may still contain hazardous residus.empty packaging should be removed by a licensed waste contractor

_______________________________________________________________________________ 14 . Transport Information .DOT

Proper shipping name: none

Non-hazardous for transport: This substances is considered to be non-hazardous for transport. IATA:

Non-hazardous for air transport: Non-hazardous for air transport IMO:

Non-hazardous for sea transport: Non-hazardous for sea transport ADR/RID Class: None

Non-hazardous for transport: This substances is considered to be non-hazardous for transport.

_______________________________________________________________________________ 15. Regulatory Information

US CLASSIFICATION AND LABEL TEXT

US Statements: Caution: Avoid contact and inhalation. Target organ(s): Skin. Eyes. Respiratory system

UNITED STATES REGULATORY INFORMATION SARA LISTED: No

CANADA REGULATORY INFORMATION

WHMIS Classification: This product has been classified in accordance with the hazard criteria of the CPR, and the MSDS contains all the information required by the CPR. DSL: No NDSL: No

_______________________________________________________________________________ 16. Other Information DISCLAIMER

For R&D use only. Not for drug, household or other uses. Suitable for waterproof and dampproof construction in basement, bathroom and bedroom and etc. WARRANTY

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product.

本文来源:https://www.bwwdw.com/article/myc3.html

Top