ChIP protocol实验室成熟的CHIP-seq及CHIP-qPCR操作流程
更新时间:2024-07-03 13:50:01 阅读量: 综合文库 文档下载
- chip推荐度:
- 相关推荐
ChIP protocol
Fixation type: Type I:
1% formaldehyde /PBS(100ml): 36.5%formaldehyde (F8775-500ml) 2.5ml diluted in 1XPBS 88.75 ml Room temperature, 15min Type II:
2-5mM DSG (stock 50mM: 10mg in 540ul of dry DMSO), Room temperature, 45min 1% formaldehyde /PBS, Room temperature, 15min Type III:
1% Glutaraldehyde solution
(Grade I, 25% in H2O, specially purified for use as an electron microscopy fixative) sigma G5882-100ml, Room temperature, 15min
Stock buffer: 20%SDS; 0.5M, pH8.0 EDTA; 1M, pH7.8 Tris-Cl; 10% TritonX100; 5M NaCl, Buffer recipe: Lysis Buffer 20%SDS 0.5M, pH8.0 EDTA 1M, pH7.8 Tris-Cl 50Xcocktail(Roche) Double Distilled water
Dilution Buffer 10% TritonX100 0.5M, pH8.0 EDTA 5M NaCl 1M, pH7.8 Tris-Cl 50Xcocktail(Roche) Double Distilled water 100ml 20%SDS 10% TritonX100 0.5M, pH8.0 EDTA 5M NaCl 1M, pH7.8 Tris-Cl 50Xcocktail(Roche) Double Distilled water TSE1 0.5ml 10ml 0.4ml 3ml 2ml 1ml(add freshly) 83.1ml TSE2 0.5ml 10ml 0.4ml 8ml 2ml 1ml(add freshly) 78.1ml
10ml 0.5ml 0.2ml 0.5ml 0.2ml(add freshly) 8.6ml 2ml 100ul 50ul 100ul 40ul(add freshly) 1720ul 500ml 50ml 2ml 15ml 10ml 10ml(add freshly) 413ml 100ml 10ml 0.4ml 3ml 2ml 2ml(add freshly) 82.6ml ChIP protocol
1.25M Glycine(MW: 75.07): 18.77g plus 200ml ddw 5M NaCl(MW58.45): 292.2g plus 1L ddw, autoclave 20% SDS(MW288.38): 20g plus 100ml ddw 1M, pH7.8 Tris-Cl: 121.1g plus 1L ddw, autoclave Option:
Drug treatment:10-7 M E2 treat 1hr
Day1: cell fixation, cell lysis, sonication and antibody incubation Collecting cells
1. After fixation, cold PBS wash twice
2. 1ml PBS to scrape cells and 0.5ml PBS scrape cells
3. Transfer cells into 1.5ml tubes, max speed 30sec~1min, centrifugation at 4℃
4. If you want to stop at step3, you can freeze the samples by liquid nitrogen quickly, then store at -80℃
for long time storage. If not, continue to step 5
Cell lysis and sonication
5. Add 300ul lysis buffer plus complete cocktail (avoid creating bubbles)
6. Sonication(声波降解法): we use bioruptor for sonication: 30sec/30sec, the cycles of sonication
dependent on cell type, cell numbers and crosslinking methods. (for example: 293T, 1%formaldehyde, cells did not freeze; 20cyces can obtain acceptable DNA fragment)
7. max speed, 10~15min 4℃ to precipitate cell lysate and aspirate 10ul supernatant for sonication
efficiency test (100-500bp)
8. 95℃,10min to decrosslink protein from DNA fragment , and 1%agarose electrophoretic analysis
(actually, we will get the size from <100bp, or 100-200bp)(Tips: during test, samples should be kept at 4℃ instead of ice bath)
9. If the size of DNA fragment met ChIP grade requirement, then continue to incubation specific antibody
as following; if not, resuspend samples for further sonication
10. Cell lysate should be diluted 10-fold by dilution buffer plus cocktail (150ul cell lysate plus 1350ul dilution
buffer) and left 5ul cell lysate as input.
11. 150ul+1350ul dilution buffer +2.5ug specific antibody (2-5ug), 4℃rotation overnight
Day2: Decrosslinking
Incubating Dynabeads (Dynabeads? Protein G for Immunoprecipitation, 10004D)
12. Add Dynabeads 30ul per sample, 4℃, 3-4hrs Washing beads
13. 1.5ml per sample TSE1 plus 0.5Xcocktail(Roche) ,4℃, rotation 15min~20min 14. 1.5ml per sample TSE2 plus 0.5Xcocktail(Roche), 4℃, rotation 15min~20min
15. 1.0ml TE Buffer wash twice @ R.T, using vacuum to remove supernatant at the first time, and using
ChIP protocol
1ml pipettor to remove TE buffer instead of vacuum because Dynabeads become incompact at the second washing step
Decrosslinking
16. 300ul per sample of TE/SDS buffer (decrosslinking buffer) at 65℃ , 1,400 rpm mixing 1min every 1
hour overnight using Eppendorf Thermomixer. if sample fixed by 1% Glutaraldehyde(irreversible crosslinking), protease K(Ambion, AM2546) should be used to digest first at 50℃ (1,400 rpm mixing 15sec every 30min) in TE/SDS buffer and then 65℃(1,400 rpm mixing 1min every 1 hour) overnight.
Day3: DNA fragment Purification(QIAGEN PCR product purification kit)
17. Quickly short centrifugation and put samples on DynaMag?-2 Magnet(12321D), and transfer
supernatant to a new 2ml tube which contains 1.2ml PB Buffer in advance
18. Mix up and down gently by pipettor, then transfer samples to QIAquick spin column 19. maxi speed, 1 min
20. 750ul PE wash column, maxi speed, 1 min
21. Remove PE, maxi speed 1 min to remove residual ethanol completely 22. 60ul Elution buffer to elute DNA fragment q-PCR test before sequencing
正在阅读:
ChIP protocol实验室成熟的CHIP-seq及CHIP-qPCR操作流程07-03
8册语文课内阅读练习题10-06
2015泄露天机 历史 (教师用卷)05-22
冰蓄冷空调09-21
初中语文易错词05-31
2014-2019年中国成型机市场调研与发展战略研究报告 - 图文01-01
复合材料01-25
2011年宏达煤矿安全生产工作情况汇报工作汇报(2011.7.2)103-19
高中地理《地理环境的整体性和差异性》课堂教学设计新人教版必修06-14
创新与科技发展 教学设计10-18
- 多层物业服务方案
- (审判实务)习惯法与少数民族地区民间纠纷解决问题(孙 潋)
- 人教版新课标六年级下册语文全册教案
- 词语打卡
- photoshop实习报告
- 钢结构设计原理综合测试2
- 2014年期末练习题
- 高中数学中的逆向思维解题方法探讨
- 名师原创 全国通用2014-2015学年高二寒假作业 政治(一)Word版
- 北航《建筑结构检测鉴定与加固》在线作业三
- XX县卫生监督所工程建设项目可行性研究报告
- 小学四年级观察作文经典评语
- 浅谈110KV变电站电气一次设计-程泉焱(1)
- 安全员考试题库
- 国家电网公司变电运维管理规定(试行)
- 义务教育课程标准稿征求意见提纲
- 教学秘书面试技巧
- 钢结构工程施工组织设计
- 水利工程概论论文
- 09届九年级数学第四次模拟试卷
- ChIP
- protocol
- 实验室
- 流程
- 成熟
- 操作
- qPCR
- seq
- 计算机专业VB类通用外文翻译及文献
- 东华大学会计硕士MPAcc复试分数线及拟录取名单
- 数字电子技术课程设计指导书
- 六爻初学者的精选资料
- 英语作文中常用短语
- 物联网工程专业本科导师制教学模式在应用型本科高校的改革与研究
- 《农产品营销》教学大纲
- 智能小车设计毕业设计论文
- 基于Linux的DHCP服务器配置毕业论文 - 图文
- 行政法 选择题考试 汇总
- 2013年上海公务员申论冲刺:文章的4种经典结构
- 2013-2014学年山东省济南市历下九年级(上)期末物理试卷
- 三下乡日志及总结
- 用友软件NC-SCM橡果国际成功应用
- 证券公司实习日记10篇
- 万科集团薪酬福利制度
- 商务谈判课后答案
- 江苏省2012届高三全真模拟卷数学卷 28
- 云南农业大学钢结构复习题
- 历史必修一知识点B5