C0402C153D4RC中文资料

CERAMIC CHIP CAPACITORS

FEATURES

C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10, 16, 25, 50, 100 and 200 Volts

Standard End Metalization: Tin-plate over nickelbarrier

Available Capacitance Tolerances: ±0.10 pF; ±0.25pF; ±0.5 pF; ±1%; ±2%; ±5%; ±10%; ±20%; and+80%-20%

Tape and reel packaging per EIA481-1. (See page92 for specific tape and reel information.) BulkCassette packaging (0402, 0603, 0805 only) perIEC60286-6 and EIAJ 7201. RoHS Compliant

DIMENSIONS—MILLIMETERS AND (INCHES)

EIA SIZECODE

SIZE CODE

METRICL - LENGTH1.0 (.04) ± .05 (.002)W - WIDTH0.5 (.02) ± .05 (.002)T

THICKNESS

B - BANDWIDTH0.20 (.008) -.40 (.016)S

SEPARATION0.3 (.012)MOUNTINGTECHNIQUESolder Reflow

0402*1005See page 78

for thicknessdimensions.

Solder Wave +

or

Solder Reflow

Solder Reflow

* Note: Indicates EIA Preferred Case Sizes (Tightened tolerances apply for 0402, 0603, and 0805 packaged in bulk bassette, see page 96.)+ For extended value 1210 case size - solder reflow only.

CAPACITOR ORDERINGINFORMATION(Standard Chips - For

CERAMICSIZE CODE

SPECIFICATIONC - Standard

CAPACITANCE CODE

Expressed in Picofarads (pF)

First two digits represent significant figures.Third digit specifies number of zeros. (Use 9

for 1.0 through 9.9pF. Use 8 for 0.5 through 0.99pF)(Example: 2.2pF = 229 or 0.50 pF = 508)CAPACITANCE TOLERANCEB–±0.10pFJ–±5%C–±0.25pFK–±10%D–±0.5pFM–±20%F–±1%P– (GMV) – special order onlyG–±2%Z– +80%, -20%

Military see page 87)

END METALLIZATION

C-Standard (Tin-plated nickel barrier)

FAILURE RATE LEVEL

A- Not Applicable

72

TEMPERATURE CHARACTERISTIC

Designated by CapacitanceChange Over Temperature RangeG– C0G (NP0) (±30 PPM/°C)R– X7R (±15%) (-55°C + 125°C)P– X5R (±15%) (-55°C + 85°C)

U– Z5U (+22%, -56%) (+10°C + 85°C)V– Y5V (+22%, -82%)(-30°C + 85°C)

VOLTAGE1 - 100V3 - 25V2 - 200V4 - 16V5 - 50V8 - 10V

* Part Number Example: C0805C103K5RAC(14 digits - no spaces)7 - 4V9 - 6.3V

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

元器件交易网

CERAMIC CHIP/STANDARD

X5R CAPACITANCE RANGE

CappF12,00015,00018,00022,00027,00033,00039,00047,00056,00068,00082,000100,000120,000150,000180,000220,000270,000330,000390,000470,000560,000680,000820,0001,000,0001,200,0001,500,0001,800,0002,200,0002,700,0003,300,0004,700,0005,600,0006,800,0008,200,00010,000,00012,000,00015,000,00018,000,00022,000,00027,000,00033,000,00039,000,00047,000,000100,000,000

CapCode123153183223273333393473563683823104124154184224274334394474564684824105125155185225275335475565685825106126156186226276336396476107

CapTolerance

K,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,MK,M

0201

6.3V16V6.3V

BBBBBBBBBBBBBBBBBBBBBB

AA~BB

C0402*10VBB

BBBBBBBBBBBBBBBBBBBBBB

16VBBBBBBBBBBBBBBBBBBBBBBBB

6.3V

C0603*10V

16V

25V

4V

C0805*

6.3V10V16V25V6.3V

C1206*10V16V25V

C1210*

6.3V10V16V25V

50V

BB

CCCCCCCCCCCCCCCC

CCCCCCCCCCCCCCCC

CCCCCCCCCCCCCCCC

EBEBEBECEDEEEFEHECECECEEEFEHEH

BBBBCD

BB°CC+CC+CC+CD+

DGDDDEDHDDDEDH

DGDDDEDHDGDEDH

DGDDDEDHDDDHDH

DCDDDEDFDG

ECECEEEFEHEHEDEDEH

ECECEEEFEHEHEDEDEH

ECECEEEFEHEHEHEHEH

FK+

FH+FD+FD+FD+FG+FG+FH+FK+FK+FH+FH+FD+FD+FD+FG+FG+FH+FK+

CD°+DJ+DJ+DK+

DH°+EH+

FJ+FJ+FJ+FF+FK+FK+FK+FG+EH+FK+FK+FK+FH+

FD+FD+FG+FD+FD+FL+FL+FL+FH+FH+FH+FJ+

DJ°+

EH°+EH°+FQ°+FQ°+

NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative.+Reflow only

° Available M ±20% tolerance only

Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET's option.Reels with such substitutions will be marked with the improved KEMET part numbers.

Z5U CAPACITANCE RANGE

50 Volt Ceramic Chips can be used for 63 volt applications.* EIA preferred chip sizes

See page 78 for Thickness Code Reference Chart.

76

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

元器件交易网

CERAMIC CHIP CAPACITORS

Thickness Code Reference Chart

Packaging Quantity Based on Finished Chip Thickness Specifications

ThicknessCode

ChipSize

Chip ThicknessRange (mm)

Qty per Reel7" Plastic

Qty per Reel13" Plastic

Qty per Reel 7" Paper

Qty per Reel13" Paper

Qty per BulkCassette

AABBCBCCCDDBDCDDDEDFDGDHDJDKEBECEDEEEFEGEHEJEKELEMENFBFCFDFEFFFGFHFJFKFLFMFNFOFPFQFRFSGBGCGDGEGFGGGHGJGKGLGMGNHBHCHDHEHFJBJCJDJEJFKBKCKDKE 0201 0402 0603 06030603 0805 0805 0805 0805 0805 0805 0805 080508051206120612061206120612061206120612061206120612061210121012101210121012101210121012101210121012101210121012101210121018121812181218121812181218121812181218121812181218251825182518251825222022202220222022202225222522252225.30 ± .03 .50 ± .05 .80 ± .07 .80 ± .10.80 ± .15 .60 ± .10 .78 ± .10 .90 ± .10 1.00 ± .10 1.10 ± .10 1.25 ± .15 1.25 ± .20 1.25 ± .20 1.25 ± .15 .78 ± .10 .90 ± .10 1.00 ± .10 1.10 ± .10 1.20 ± .15 1.60 ± .15 1.60 ± .20 1.70 ± .20.80 ± .101.15 ± .151.25 ± .150.95 ± .10 .78 ± .10 .90 ± .10 .95 ± .10 1.00 ± .10 1.10 ± .10 1.25 ± .15 1.55 ± .15 1.85 ± .20 2.10 ± .201.40 ± .151.70 ± .201.85 ± .201.50 ± .201.60 ± .202.5 ± .202.25 ± .202.50 ± .201.00 ± .101.10 ± .101.25 ± .151.30 ± .101.50 ± .101.55 ± .101.40 ± .151.70 ± .151.60 ± .201.90 ± .202.00 ± .201.70 ± .201.10 ± .151.15 ± .151.30 ± .151.40 ± .151.50 ± .151.00 ± .151.10 ± .151.30 ± .151.40 ± .151.50 ± .151.00 ± .151.10 ± .151.30 ± .151.40 ± .15N/AN/AN/AN/AN/AN/A4,0004,0002,5002,5002,5002,5003,0003,0004,0004,0002,5002,5002,5002,0002,0002,0002,0002,0002,5004,0004,0004,0004,0002,5002,5002,5002,0002,0002,0002,0002,0002,0002,0002,0001,5002,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,000N/AN/AN/AN/AN/AN/A10,00010,00010,00010,00010,00010,00010,00010,00010,00010,00010,00010,00010,0008,0008,0008,0008,0008,00010,00010,00010,00010,00010,00010,00010,00010,0008,0008,0008,0008,0008,0008,0008,0008,0008,0008,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,00015,00010,0004,0004,0004,000N/A4,000N/AN/AN/AN/AN/AN/AN/A4,000N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A50,00010,00010,00010,000N/A10,000N/AN/AN/AN/AN/AN/AN/A10,000N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A50,00015,000N/AN/A10,000N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A

This chart refers to ceramic chip thickness codes on pages 73-76.

78©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

元器件交易网

CERAMIC CHIP CAPACITORS

Packaging Information

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

93

Packaging

元器件交易网

TANTALUM, CERAMIC ANDALUMINUM CHIP CAPACITORS

Packaging Information

Performance Notes

1.Cover Tape Break Force: 1.0 Kg Minimum.

2.Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:

Tape WidthPeel Strength

8 mm0.1 Newton to 1.0 Newton (10g to 100g)12 mm0.1 Newton to 1.3 Newton (10g to 130g)

The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carriertape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tapeshall be pulled at a velocity of 300 ±10 mm/minute.

3.Reel Sizes:Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")reels (with C-7280). Note that 13” reels are preferred.

beling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.Refer to EIA-556.

Embossed Carrier Tape Configuration: Figure 1

Table 1 — EMBOSSEDTAPEDIMENSIONS (Metric will govern)

元器件交易网

TANTALUM, CERAMIC ANDALUMINUM CHIP CAPACITORS

Packaging Information

Embossed Carrier Tape Configuration (cont.)

20°

Sketch D: Tape Camber (Top View)

400mm (15.75) Min.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630095

元器件交易网

CERAMIC CHIP CAPACITORS

Packaging Information

Punched Carrier (Paper Tape) Configuration (Ceramic Chips Only):

96©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

元器件交易网

CERAMIC CHIP CAPACITORS

Packaging Information

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

97

g

nigakcaP

本文来源：https://www.bwwdw.com/article/kfp1.html