BASF 巴斯夫 Ultramid B3WG6 30% Glass Filled PA6(dry)

BASF Ultramid® B3WG6 30% Glass Filled PA6 (Dry)

Categories:Material Notes:Density

WaterAbsorptionWater Absorption

Moisture Absorption atEquilibrium Viscosity Test Linear Mold Shrinkage Melt Flow

; ; ; ; Ultramid B3WG6 is a 30% glass fiber reinforced, heat stabilized injection

molding PA6 grade.

6.3 - 6.9 %6369%1.9 - 2.3 %

6.3 - 6.9 %6369%1.9 - 2.3 %ISO 1183ISO62ISO 62

23°C/50% R.H.; ISO 62Viscosity number; ISO

307

ISO 1133

@Load500kg@Load 5.00 kg,Temperature 275 °C

@Load110lb@Load 11.0 lb,Temperature 527 °F

Mechanical Properties

Tensile Strength, Yield Elongation at Yield Modulus of Elasticity Flexural Strength Flexural Modulus Izod Impact, Notched(ISO)

Charpy ImpactUnnotched

MetricEnglish

3.50%

3.50%

@Temperature -30.0 °C

@Temperature -22.0 °F

Comments

50mm/min; ISO 52750mm/min; ISO 527

ISO 527ISO 178ISO 178ISO 180/A

ISO 179/1eUISO179/1eUISO 179/1eUISO 179/1eAISO 179/1eA

Charpy Impact, Notched

@Temperature -30.0 °C

@Temperature -22.0 °F

Electrical PropertiesVolume Resistivity Dielectric Constant Dissipation Factor Comparative TrackingIndex

Thermal PropertiesCTE, linear, Parallel toFlow

MetricEnglish

3.8

@Frequency 1.00e+6 Hz

3.8

@Frequency 1.00e+6 Hz

CommentsIEC 60093IEC 60250IEC 60250

Test Solution A; IEC

60112

CommentsISO 11359-1/-2

0.023

@Frequency 1.00e+6 Hz

0.023

@Frequency 1.00e+6 Hz

Metric

20.0 - 25.0 µm/m-°CEnglish

11.1 - 13.9 µin/in-°F

@Temperature 23.0 - 80.0 °C@Temperature 73.4 - 176 °F

CTE, linear, Transverse60.0 - 70.0 µm/m-°C33.3 - 38.9 µin/in-°FISO 11359-1/-2

@Temperature 23.0 - 80.0 °C@Temperature 73.4 - 176 °F

Specific Heat Capacity Thermal Conductivity Melting Point Maximum ServiceTemperature, Air

HB

@Thickness 1.60 mm

HB

@Thickness 0.0630 in

DIN 52612

DIN 53765

for 50% loss of tensilestrength after 20,000 hrfor 50% loss of tensilestrength after 5,000 hr

ISO75ISO 75ISO 75

Deflection TemperatureDeflectionTemperature

at 0.46 MPa (66 psi) Deflection Temperatureat 1.8 MPa (264 psi) Flammability, UL94

Processing PropertiesProcessingPropertiesMelt Temperature Mold Temperature Descriptive PropertiesColor

CommercialStatusCommercial StatusForm

Impact ModifiedPrimary ProcessingTechniqueProcessing

Special characteristic

Metric270 - 290 °C80.0 - 90.0 °C

English518 - 554 °F176 - 194 °FCommentsInjection-molding/ExtrusionInjection-molding

Natural

NorthAmericaandEuropeNorth America and Europe

Pellets

No

Injection Molding

Injection Molding

Heat stabilized or stable to heat

本文来源：https://www.bwwdw.com/article/jq8j.html