zemax常用评价函数操作数
更新时间:2024-04-12 21:52:01 阅读量: 综合文库 文档下载
Operand Definitions
ZEMAX supports optimization operands which are used to define the merit function. Each operand may be assigned a weight which indicates the relative importance of that operand, as well as a target, which is the desired value for that operand. The operands are listed below.
ABSO: Absolute value 绝对值
ACOS: Arccosine
AMAG: Angular magnification 角放大率
ANAR: Angular aberration
ASIN: Arcsine
ASTI: Astigmatism 初级像散
ATAN: Arctangent
AXCL: Axial color
BLNK: Blank
BSER: Boresight Error
COGT: Conic greater than
COLT: Conic less than
COMA: Coma 初级彗差
CONF: Configuration #
CONS: Constant 常量
COSI: Cosine
COVA: Conic value
CTGT: Center thickness greater than 中心厚度(间隔)大于
CTLT: Center thickness less than 中心厚度(间隔)小于
CTVA: Center thickness value 中心厚度(间隔)等于
CVGT: Curvature greater than 曲率大于
CVLT: Curvature less than 曲率小于
CVOL: Cylinder volume
CVVA: Curvature value 曲率等于
DENC: Diffraction encircled energy
DENF: Diffraction encircled energy fraction
DIFF: Difference
DIMX: Distortion max 最大畸变
DISC: Distortion calibrated
DISG: Generalized distortion
DIST: Distortion 畸变
DIVI: Division
DLTN: Delta N
DMFS: Default merit function start 默认评价函数起始点
DMGT: Diameter greater than 直径大于
DMLT: Diameter less than 直径小于
DMVA: Diameter value 直径值
DXDX: Derivative Dx/Dx
DXDY: Derivative Dx/Dy
DYDX: Derivative Dy/Dx
DYDY: Derivative Dy/Dy
EFFL: Effective focal length 有效焦距
EFLX: Effective focal length x x方向焦距
EFLY: Effective focal length y y方向焦距
ENDX: End execution
ENPP: Entrance pupil position 入瞳位置
EPDI: Entrance pupil diameter 入瞳直径
EQUA: Equal
ETGT: Edge thickness greater than 边缘厚度大于
ETLT: Edge thickness less than 边缘厚度小于
ETVA: Edge thickness value 边缘厚度等于
EXPP: Exit pupil position 出瞳位置
FCGS: Field curvature, generalized, sagittal
FCGT: Field curvature, generalized, tangential
FCUR: Field curvature 场曲
FICL: Fiber coupling efficiency
FOUC: Foucault analysis
GBW0: Gaussian beam waist 0
GBWA: Gaussian beam size
GBWD: Gaussian beam divergence
GBWZ: Gaussian beam z position
GBWR: Gaussian beam phase radius
GCOS: Glass relative cost
GENC: Geometric encircled energy
GLCA: Global coordinate x normal
GLCB: Global coordinate y normal
GLCC: Global coordinate z normal
GLCX: Global coordinate x coordinate
GLCY: Global coordinate y coordinate
GLCZ: Global coordinate z coordinate
GMTA: Geometric MTF average 几何平均MTF
GMTS: Geometric MTF sagittal 几何弧矢MTF
GMTT: Geometric MTF tangential几何子午MTF
GPIM: Ghost Pupil Image
GRMN: Gradient minimum index
GRMX: Gradient maximum index
GTCE: Glass Thermal Coefficient of Expansion
HHCN: Tests for hyper-hemisphere conditions
IMAE: Image analysis efficiency
INDX: Index of refraction
InGT: Index greater than折射率大于
InLT: Index less than 折射率小于
InVA: Index value 折射率等于
ISFN: Image space F/# 像方F数
LACL: Lateral color
LINV: Lagrange invariant
LPTD: LightPath Delta
MAXX: Maximum
MCOG: Multi-configuration operand greater than
MCOL: Multi-configuration operand less than
MCOV: Multi-configuration operand value
MINN: Minimum
MNAB: Minimum Abbe 最小阿贝数
MNCA: Minimum center thickness air最小中心间隔(空气)
MNCG: Minimum center thickness glass最小中心厚度(玻璃)
MNCT: Minimum center thickness 最小中心厚度(间隔)
MNCV: Minimum curvature 最小曲率半径
MNDT: Minimum diameter to thickness ratio最小通光直径与厚度之比
MNEA: Minimum edge thickness air最小边缘间隔(空气)
MNEG: Minimum edge thickness glass最小边缘厚度(玻璃
MNET: Minimum edge thickness最小边缘厚度(间隔)
MNIN: Minimum index最小折射率
MNPD: Minimum partial dispersion
MNSD: Minimum semi-diameter
MSWA: MTF square wave average
MSWS: MTF square wave sagittal
MSWT MTF square wave tangential
MTFA: MTF average 平均MTF
MTFS: MTF sagittal 弧矢MTF
MTFT: MTF tangential 子午MTF
MXAB: Maximum Abbe 最大阿贝数
MXCA: Maximum center thickness air 最大中心间隔(空气)
MXCG: Maximum center thickness glass最大中心厚度(玻璃)
MXCT: Maximum center thickness 最大中心厚度(间隔)
MXCV: Maximum curvature 最大曲率半径
MXDT: Maximum diameter to thickness ratio最大通光直径与厚度之比
MXEA: Maximum edge thickness air 最大边缘间隔(空气)
MXEG: Maximum edge thickness glass 最大边缘厚度(玻璃)
MXET: Maximum edge thickness 最大边缘厚度(间隔)
MXIN: Maximum index 最大折射率
MXPD: Maximum partial dispersion
MXSD: Maximum semi-diameter 最大半口径
NPXG: Non-sequential object position x greater than
NPXL: Non-sequential object position x less than
NPXV: Non-sequential object position x value
NPYG: Non-sequential object position y greater than
NPYL: Non-sequential object position y less than
NPYV: Non-sequential object position y value
NPZG: Non-sequential object position z greater than
NPZL: Non-sequential object position z less than
NPZV: Non-sequential object position z value
NSDD: Non-sequential detector data
NSTR: Non-sequential trace
NTXG: Non-sequential object tilt about x greater than
NTXL: Non-sequential object tilt about x less than
NTXV: Non-sequential object tilt about x value
NTYG: Non-sequential object tilt about y greater than
NTYL: Non-sequential object tilt about y less than
NTYV: Non-sequential object tilt about y value
NTZG: Non-sequential object tilt about z greater than
NTZL: Non-sequential object tilt about z less than
NTZV: Non-sequential object tilt about z value
NPGT: Non-sequential object parameter greater than
NPLT: Non-sequential object parameter less than
NPVA: Non-sequential object parameter value
OBSN: Object space N.A. 物方空间N.A.
OFF: Off
OPDC: Optical path difference
OPDM: Optical path difference mean reference
OPDX: Optical path difference centroid reference
OPGT: Operand greater than
OPLT: Operand less than
OPTH: Optical path
OSUM: Operand sum
PnGT: Parameter greater than. Obsolete operand. See PMGT.
PnLT: Parameter less than. Obsolete operand. See PMLT.
PnVA: Parameter value. Obsolete operand. See PMVA.
PMGT: Parameter greater than
PMLT: Parameter less than
PMVA: Parameter value
PANA: Paraxial x normal
PANB: Paraxial y normal
PANC: Paraxial z normal
PARA: Paraxial x cosine
PARB: Paraxial y cosine
PARC: Paraxial z cosine
PARR: Paraxial r coordinate
PARX: Paraxial x coordinate
PARY: Paraxial y coordinate
PARZ: Paraxial z coordinate
PATX: Paraxial x tangent
PATY: Paraxial y tangent
PETC: Petzval curvature
PETZ: Petzval radius
PIMH: Paraxial image height 近轴像高
PLEN: Path length
PMAG: Paraxial magnification 理想放大率
POWR: Power (surface)
PRIM: Primary wavelength
PROD: Product
QSUM: Quadratic sum
RAGX: Real global x coordinate
RAGY: Real global y coordinate
RAGZ: Real global z coordinate
RAGA: Real global x direction cosine
RAGB: Real global y direction cosine
RAGC: Real global z direction cosine
RAED: Ray angle of exitance in degrees
RAEN: Ray angle of exitance
RAID: Ray angle of incidence in degrees
RAIN: Ray angle of incidence
RANG: Ray angle
REAA: Real ray x cosine
REAB: Real ray y cosine
REAC: Real ray z cosine
REAR: Real r coordinate
REAX: Real x coordinate
REAY: Real y coordinate
REAZ: Real z coordinate
RENA: Real x normal
RENB: Real y normal
RENC: Real z normal
RETX: Real x tangent
RETY: Real x tangent
RGLA: Reasonable glass
RSCE: RMS spot centroid
RSCH: RMS spot chief ray
RSRE: RMS spot centroid (with vignetting)
RSRH: RMS spot chief ray (with vignetting)
RWCE: RMS wave centroid
RWCH: RMS wave chief
RWRE: RMS wave centroid (with vignetting)
RWRH: RMS wave chief ray (with vignetting)
SAGX: Sag x
SAGY: Sag y
SFNO: Sagittal working F/#
SINE: Sine
SKIN: Skip if not symmetric
SKIS: Skip is symmetric
SPHA: Spherical aberration
SQRT: Square root
SUMM: Summation
SVIG: Set Vignetting
TANG: Tangent
TFNO: Tangential working F/#
TMAS: Total mass
TOTR: Total track 总长度
TRAC: Transverse aberration referenced to centroid
TRAD: Transverse aberration x component
TRAE: Transverse aberration y component
TRAI: Transverse aberration radius at intermediate image
TRAR: Transverse aberration radius
TRAX: Transverse aberration x
TRAY: Transverse aberration y
TRCX: Transverse aberration x component referenced to centroid
TRCY: Transverse aberration y component referenced to centroid
TTGT: Total thickness greater than 总厚度大于
TTHI: Total thickness 总厚度
TTLT: Total thickness less than总厚度小于
TTVA: Total thickness value 总厚度等于
UDOP: User defined operand
USYM: Use axial symmetry
VOLU: Volume
WFNO: Working F/# 工作F数
XDGT: Extra data value greater than
XDLT: Extra data value less than
XDVA: Extra data value
XENC: Extended source encircled energy
XNEA: X minimum edge thickness air
XNEG: X minimum edge thickness glass
XNET: X minimum edge thickness
XXEA: X maximum edge thickness air
XXEG: X maximum edge thickness glass
XXET: X maximum edge thickness
YNIP: YNI paraxial contribution
ZERN: Zernike coefficients
ZPLM: ZPL Macro computations
ZTHI: Zoom thickness
正在阅读:
zemax常用评价函数操作数04-12
小学作文教学有效性的方法02-29
神手高峰针灸绝技06-10
尔雅中华民族精神答案05-25
电大国家开放大学《民事诉讼法学(专)》2019-2020期末试题及答案11-25
最新教科版小学科学五年级下册《浮力》公开课教学设计203-18
智课网:雅思写作短期提升分3步走04-04
北京建筑大学硕士学位论文原创性声明12-03
DLT_5210.1-2012_电力建设施工质量验收及评价规程_第1部分土建工04-29
微机原理综合练习题3答案11-05
- 必修一物理寒假作业
- 2019-201X年5月大学生入党积极分子思想汇报-word范文模板(3页)
- 药物分析习题五
- 重拾应用意识 体会数学价值(沈建军)
- 2017全国高校辅导员结构化面试题集及参考答案
- 广东徐闻县实验中学2014届高三第二次月测地理试题
- 今天你共鸣了么?
- 2018-2019正能量读后感1000字-推荐word版(6页)
- 2018年中国截切型盖板针布行业专题研究分析报告目录
- 中国移动业务处理流程大全
- 公文写作常用词汇和句子集锦2016
- ARM课程设计说明书
- 教师资格证教育学论文
- 中考试卷分析
- 环境监测试卷(五)
- 党风廉政建设广播稿1
- 快速制作香香宫煮麻辣烫教程
- 《国际金融学》习题
- 文明施工保障措施方案
- 春兰维修资料故障代码
- 操作数
- 函数
- 常用
- 评价
- zemax
- 师大经管院05-06微观经济学试题A
- 《发展生产 满足消费》教学设计
- 反演地表温度 程序代码
- 南开17春秋学期《美术概论(尔雅)》在线作业
- 中华传统文化与人生修养单元测试题答案
- 作物栽培学实验(实习)指导书
- 安徽省合肥市2008年高三第三次教学质量检测数学试题(文科)2008
- 2018年鸡西市小学毕业小升初模拟数学试题(共2套)附详细答案附
- 扬州市中小学生“生态文明低碳生活”征文比赛结果
- 鲍鹏山《说孔子 - 日常圣人》
- 鲁教版四年级语文上册第一单元测试题
- 完整打印版小学语文一年级(下)备课教案
- 滴定液与标准液配制SOP
- 六安市广告公司名录2018版815家 - 图文
- java开发常用日语
- 云南煤矿瓦斯等级鉴定确认管理
- 杜甫与他的朋友们(PPT配套讲稿)
- 关于做好2017年军队院校政治考核表
- 英译汉
- 南京栖霞山文化休闲旅游度假区和文化创意产业集聚区