给新手参考的_Cadence_Allegro快捷键设置

# May use function keys F2-F12, most Alpha-numberic keys with control

# modifier (although Control - C, V and X are reserved for copy, paste and cut) # and Navigation Keys (Home, Up arrow, Esc, etc.) These items may be modifed # by the following:

# Modifier Indicator Example # Shift S SF2

# Control C (function keys) CF2 # Control ~ (alpha-numeric) ~N # Meta A AF2

# Modifiers may be combined. Some examples: # CSF2 Control-Shift F2 # ASF2 Meta-Shift F2 # CAF2 Control-Meta F2

# CASF2 Control-Meta-Shift F2 # ~SZ Control-Shift Z # SUp Shift-Up Arrow # CUp Control-Up Arrow #

# funckey

# use the funckey when you wish to have alphanumeric keys operate # like the Function keys when the cursor is in the Allegro canvas. #

# Example -- following starts the move command without a Enter key # funckey m move

#--------------------------------------------------------------------

# Bind incremental pick by grid unit functions to ctrl and shift--arrow keys alias Up \alias Down \alias Left \alias Right \alias CUp \alias CDown \alias CLeft \alias CRight \

# F1 is normally reserved by the system for Help so we don't use it alias F2 save

alias F3 show measure #测量 alias F4 COLOR192 #颜色 alias F5 redraw #刷新 alias F6 Shape edit boundary #编辑图形

alias F7 UNRATS ALL #隐藏板上所有飞线 alias F8 RATS ALL #显示板上所有飞线 alias F9 FIX #固定物体

alias F10 UNFIX #解除固定 alias F11 zoom in #放大视图 alias F12 zoom out #缩小视图 alias SF1 reject alias SF2 slide

alias SF3 custom smooth alias SF4 COLOR

alias SF5 shell explorer alias SF6 void all alias SF7 shape add

alias SF8 swap functions alias SF9 swap components

alias SF10 zoom fit #alias SF11 hilight alias SF12 dehilight alias ~A Manually alias ~B boundary alias ~C copy alias ~D delete

alias ~E property edit

alias ~F zoom fit #alias ~G grid toggle

alias ~H hilight #alias ~I show element alias ~J FIND alias ~K CMGR alias ~L add line alias ~M mirror

alias ~N dehilight all #alias ~O open #alias ~P cns show #alias ~Q Delay Tune #alias ~R rotate #alias ~S save

alias ~T add text #alias ~W custom smooth

alias ~Z UNDO #alias ~Y REDO #alias pd padeditdb #alias jn find_by_name #alias jc FIND component #funckey ' ' iangle 90 #funckey + subclass -+ #funckey - subclass -- #放大到整板视图 放大到整板视图 高亮物体 清除高亮 打开文件

打开约束管理器 移动修改线与孔 旋转 增加文本 取消上次操作 恢复上次操作 焊盘编辑 查找物体 查找元件

以90度旋转选中的物体 跳转到下一个层 跳转到上一个层

#------------------------------------------------------------------- # View Control alias Pgup oops

alias SPgup pop route_from_target alias CPgup shadow toggle alias Home slide alias Pgdown next

alias SPgdown angle 90shadow alias SHome pop finish alias End add connect alias Del delete

alias SDel pop swap layers alias Insert DONE alias SInsert TOGGLE alias SLeft PLACE Manual alias SRight move

alias SUp swap COMPONENTS alias SDown ALIGN COMPONENTS

#-------------------------------------------------------------------- # OTHER ALIASESa alias x pick alias y pick 1 alias ix ipick alias iy ipick 0

alias 1 FORM mini acon_line_width 1 alias 2 FORM mini acon_line_width 0.25 alias 2.5 FORM mini acon_line_width 0.25 alias 3 FORM mini acon_line_width 0.3 alias 4 FORM mini acon_line_width 0.4 alias 5 FORM mini acon_line_width 0.5 alias 6 FORM mini acon_line_width 0.6 alias 7 FORM mini acon_line_width 0.7 alias 8 FORM mini acon_line_width 0.8 alias 9 FORM mini acon_line_width 0.9 alias g \

alias g0.05 replay g0.05.scr alias g0.01 replay g0.01.scr alias g0.1 replay g0.1.scr alias g0.2 replay g0.2.scr alias g0.3 replay g0.3.scr alias g0.5 replay g0.5.scr alias g0.6 replay g0.6.scr alias g0.9 replay g0.7.scr

alias g0.9 replay g0.8.scr alias g0.9 replay g0.8.scr alias g0.9 replay g0.9.scr alias g1 replay g1.scr alias g2 replay g2.5.scr alias g2.5 replay g1.scr alias g.1 replay g0p1 alias g.5 replay g0p5 alias g1.5 replay g1p5 alias g2 replay g2 alias g2.5 replay g2p5 alias g3 replay g3.scr alias g3.5 replay g3.5.scr alias g4 replay g4

alias g4.5 replay g4.5.scr alias g5 replay g5 alias g5.5 replay g5p5 alias g6 replay g6 alias g6.5 replay g6.5 alias g7 replay g7 alias g7.5 replay g7.5 alias g8 replay g8 alias g8.5 replay g8.5 alias g9 replay g9 alias g10 replay g10 alias g10.5 replay g10p5 alias g11 replay g11 alias g12 replay g12 alias g12.5 replay g12p5 alias g13 replay g13 alias g14 replay g14 alias g15 replay g15 alias g16 replay g16 alias g17 replay g17 alias g18 replay g18 alias g19 replay g19 alias g20 replay g20 alias g25 replay g25 alias g30 replay g30 alias g50 replay g50 alias g100 replay g100 alias g111 replay g111 alias g500 replay g500

#---------------------------以下为Script快捷键-----------------------------------------

alias t replay t #顶层元件框 alias b replay b #底层元件框 alias ts replay SILKSCREEN_TOP #顶层元件框序号 alias bs replay SILKSCREEN_BOTTOM #底层元件框序号 alias tss replay tss #顶层所有丝印 alias bss replay bss #底层所有丝印 alias so replay SILKSCREENoff #关闭所有丝印 alias aw replay Artwork #出图

#----------------------------以上为Script快捷键---------------------------------------- # OTHER ALIASES

alias rps \焊盘替换 alias unplrp report unplaced alias pn replay pn.scr #敷铜显示FILL

alias po replay po.scr #敷铜显示FILL关闭 alias co replay co.scr #敷铜显示FILL

alias cn replay cn.scr #敷铜显示FILL关闭

#-------------------------------------------------------------------- # OTHER ALIASES alias edps padedit

alias rps \alias unplrp report unplaced alias x pick alias y pick l alias ix ipick alias iy ipick 0

alias reopen 'open -q $module' alias revert 'open -q $module' # autoroam

alias sar set pcb_autoroam alias uar unset pcb_autoroam alias reopen 'open -q $module'

alias bubset 'settoggle shove_mode Off \bubble_space $shove_mode' alias ~B bubset

alias smoothset 'settoggle smooth_mode Off Minimal Full; options smooth_level $smooth_mode'

alias ~C smoothset

#--------------------------------------------------------------------

# COMMAND DEFAULTS

# allow slide to work on arcs by default set slide_arcs

# Compatibility aliases alias window zoom alias hilite hilight alias dehilite dehilight alias pickx pick alias picky pick l alias ipickx ipick alias ipicky ipick 0 alias cdnshelp cdsdoc

#-------------------------------------------------------------------- # MOUSE WHEEL SUPPORT (Windows only)

# Environment Variables - Note quote variables so they are evaluated # at button time not when this file is read.

# - _wheelcnt variable is set based upon number of detents wheel moved # range is -4 to 4 (no 0)

# - sx1 and sy1 are cursor coordinates when wheel is moved #

# Button values

# wheel_up: when wheel is moved up # wheel_down: when wheel is moved down

# wheel: up/down if either of above 2 buttons are not assigned #

# Keyboard modifiers (note we are case insensitive) # S - shift key # C - control key

# SC - shift and control

# Example: SCwheel - for wheel button assignment with both shift & control keys #

# Button factor may be factorion (e.g. 0.5) set buttonfactor = 1

button wheel_up \button wheel_down \button Cwheel_up \button Cwheel_down \source -q $ALLEGRO_SITE/site.env

# COMMAND DEFAULTS

# allow slide to work on arcs by default set slide_arcs

# Compatibility aliases alias window zoom alias hilite hilight alias dehilite dehilight alias pickx pick alias picky pick l alias ipickx ipick alias ipicky ipick 0 alias cdnshelp cdsdoc

#-------------------------------------------------------------------- # MOUSE WHEEL SUPPORT (Windows only)

# Environment Variables - Note quote variables so they are evaluated # at button time not when this file is read.

# - _wheelcnt variable is set based upon number of detents wheel moved # range is -4 to 4 (no 0)

# - sx1 and sy1 are cursor coordinates when wheel is moved #

# Button values

# wheel_up: when wheel is moved up # wheel_down: when wheel is moved down

# wheel: up/down if either of above 2 buttons are not assigned #

# Keyboard modifiers (note we are case insensitive) # S - shift key # C - control key

# SC - shift and control

# Example: SCwheel - for wheel button assignment with both shift & control keys #

# Button factor may be factorion (e.g. 0.5) set buttonfactor = 1

button wheel_up \button wheel_down \button Cwheel_up \button Cwheel_down \source -q $ALLEGRO_SITE/site.env

本文来源：https://www.bwwdw.com/article/j64.html