ASTM紧固件标准最新目录2009

美国ASTM、SAE紧固件相关标准最新目录

2009-11-26 ASTM

A 黑色金属

B 有色金属（铜，铝，粉末冶金材料，导线等） C 水泥，陶瓷，混凝土与砖石材料

D 其它各种材料（石油产品，燃料，低强塑料等）

E 杂类（金属化学分析，耐火试验，无损试验，统计方法等） F 特殊用途材料（电子材料，防震材料，外科用材料等） G 材料的腐蚀，变质与降级

ASTM A1014_A1014M-2009 高温下使用的沉淀硬化螺栓连接材料规范(UNS N07718) ASTM A153_A153M-2009 鋼鐵五金熱浸鍍鋅標準 ASTM A153-A153M-2005 (繁体中文) ASTM A183-2009 钢轨用碳素钢螺栓和螺母

ASTM A193-A193M-2009 高温设备用合金钢和不锈钢螺栓材料

ASTM A194-A194M-2007 高温和高压设备用碳素钢与合金钢螺栓和螺母的规格 ASTM A307-2007 抗拉强度为60000psi的碳素钢螺栓和螺柱的技术规范 ASTM A31-2004 钢铆钉及铆钉和压力容器用棒材 ASTM A320-A320M-2007 低温用合金钢螺栓材料规格

ASTM A325-2009 经热处理最小抗拉强度为830Mpa的热处理钢结构螺栓 ASTM A325M-2009 经热处理最小抗拉强度为120-105ksi的热处理钢结构螺栓 ASTM A354-2007 淬火与回火合金钢螺栓,双头螺栓及其他外螺纹紧固件规格 ASTM A370-2009a 钢产品力学性能试验方法和定义 ASTM A394-2007 传动塔架用镀锌和裸露钢螺栓

ASTM A437_A437M-2006 高温用经特殊处理的涡轮型合金钢螺栓材料 ASTM A449-2007 经淬火和回火的钢螺栓和螺柱

ASTM A453_A453M-2008 具有同奥氏体钢相类似的膨胀系数、屈服强度为50-120Ksi(345-827MPa)的耐高温螺栓材料 ASTM A489-2004 碳素钢吊耳

ASTM A490-2008b 最小拉伸强度为150千磅／平方英寸热处理钢结构螺栓

ASTM A490M-2009 最小拉伸强度为150千磅／平方英寸热处理钢结构螺栓 ASTM A493-2009 冷镦和冷锻不锈钢和耐热钢丝 ASTM A502-2003 结构钢铆钉规范

ASTM A540-A540M-2006 特殊用途的合金钢螺栓材料 ASTM A563-2007 碳钢合合金钢螺帽

ASTM A563M-2006 碳素钢及合金钢螺母技术规范 ASTM A574-2008 合金钢内六角螺钉 ASTM A574M-2008 合金钢内六角螺钉(米制)

ASTM A633-A633M-2006 正火的高强度低合金结构钢 ASTM A66-2007 钢质螺旋道钉

ASTM A700-2005 钢制品国内装运的包装、标记和装载方法 ASTM A865-2003 钢管连接用黑色或镀锌焊接或无缝钢螺纹接头 ASTM A865-A865M-2006 钢管连接用黑色或镀锌焊接或无缝钢螺纹接头

ASTM A962_A962M-2009 预定用于从低温至蠕变范围内任何温度的钢紧固件或其材料的通用要求

ASTM B117-2007 盐雾设备运行的标准实施规程

ASTM B16-B16M-2005 螺纹切削机用易切削黄铜杆材、棒材和型材的标准规范 ASTM B571-2008 (SCAN) 金属镀层粘附性的试验方法 ASTM B577-2004 铜的氢脆试验方法 ASTM B633-2007 钢铁表面的电沉积锌镀层

ASTM B695-2004 钢铁表面的锌机械沉积镀层标准规范

ASTM B849-2007 为减少氢脆变危险对铁或钢进行后镀层处理的技术规范 ASTM B850-1998(2004) 对钢铁镀层后处理以减小氢脆变危险的标准规范 ASTM C1513-2004 冷成形钢构架连接件用钢自攻螺钉标准规范 ASTM D5170 吊钩和环紧固件拉伸强度标准试验方法 ASTM D6117-1997(2005) 紧固件在塑料木材上力学试验方法

ASTM D7332_D7332M-2009 紧固件穿入一合成纤维聚合物织物阻力测量标准试验方 ASTM E2265-2009 混凝土和砖石建筑用锚及紧固件标准术语 ASTM F1077-2005 F-16 委员会紧固件规范的选择 ASTM F1135-2004 紧固件用铬酸镉或锌有机防蚀镀层 ASTM F1136-2004 紧固件用铬或锌防蚀镀层

ASTM F1136M-2004 紧固件用铬或锌防蚀镀层

ASTM F1137-2006 紧固件用磷酸盐／油和磷酸盐／有机防蚀镀层 ASTM F1145-2001 冷锻,焊接,锻制松紧螺纹扣

ASTM F1428-2005 用扫描隧道显微术法测定气体分配系统元件的表面粗糙度的测试方法 ASTM F1459-93(1998) 测定金属材料对气体氢脆化灵敏度的方法 ASTM F1470-2009 特定的机械性能和功能检测用紧固件的抽样 ASTM F1554-2004 36、55和105ksi生产强度的锚栓标准规范 ASTM F1575-2003 钉子屈服弯矩测定的标准试验方法

ASTM F1624-2000 用增长载荷技术测量钢中氢脆性的标准试验方法 ASTM F1667-2003 楔入式紧固件标准规范钉子、长钉和U形钉 ASTM F1789-2009 F16机械紧固件标准术语

ASTM F1852-2005 经热处理最低抗拉强度为120105ksi“拧断”型拉力控制结构钢螺栓螺母垫片组件技术规范

ASTM F1940-2001 电镀或涂层防护的紧固件防氢脆工艺控制检验试验方法 ASTM F1941-2006 螺紋扣件電鍍塗層(英制螺紋(UN UNR))標準規範（中文版） ASTM F1941M-2005 螺纹经固件电镀层规范（公制） ASTM F2078-2001 氢脆化试验的相关标准术语 ASTM F2078-2008 氢脆化试验的相关标准术语

ASTM F2281-2004 抗热和高温用的不锈钢和镍合金螺栓，六角帽螺钉，和螺柱螺栓规范 ASTM F2282-2003 机械紧固件用碳和合金钢丝，杆和棒的质量保证要求规范

ASTM F2328-2005 测定硬化和回火螺纹钢螺栓，螺钉和螺柱螺栓的脱碳和渗碳的试验方法

ASTM F2328M-2005 测定硬化和回火螺纹钢螺栓，螺钉和螺柱螺栓的脱碳和渗碳的试验方法

ASTM F2329-2005 碳和合金钢螺栓、螺钉、垫圈、螺母及专用螺纹紧固件所要求的镀锌、热镀规范

ASTM F2403-2005 英制尺寸系列碳钢、60000磅抗拉强度下机螺钉规范 ASTM F2482-2005 外螺纹紧固件负荷指示规范 ASTM F432-2004 螺栓、岩石锚栓和附件 ASTM F436-2004 淬火的钢垫圈 ASTM F436M-2004 淬火的钢垫圈

ASTM F467-2006 一般用途有色金属螺母 ASTM F467M-2005 一般用途有色金属螺母

ASTM F468-2005a 一般用途有色金属螺栓、六角头螺钉及螺柱 ASTM F468M-2005a 一般用途有色金属螺栓、六角头螺钉及螺柱

ASTM F519-1997e2 电镀处理和飞机保养用化学药品的机械氢脆化试验方法 ASTM F541-2004 合金钢有眼螺栓试验方法 ASTM F547-2006 木材和木基材料用钉的术语

ASTM F568M-2007 碳钢及合金钢米制外螺纹紧固件的技术规范——性能 ASTM F592-1984(R2006) 有关检验和连接紧固件及其操作工具的术语 ASTM F593-2008 不锈钢螺栓内六角头螺钉及螺柱 ASTM F594-2006 不锈钢螺母

ASTM F606-2005 外螺纹及内螺纹紧固件、垫圈及铆钉的机械特性的试验方法 ASTM F606M-2005 外螺纹及内螺纹紧固件、垫圈及铆钉的机械特性的试验方法 ASTM F680-1980(2002) 钉子的试验方法

ASTM F738M-2008 不锈钢米制螺栓、螺钉及螺柱(米制)

ASTM F788-F788M-2005 英制及米制系列的螺栓、螺钉及螺柱的表面不均匀性 ASTM F812_F812M-2007 英制和米制系列螺母的表面不均匀性 ASTM F835-2004 合金钢管座凸头及扁平沉头六角螺钉 ASTM F835M-2004 合金钢管座凸头及扁平沉头六角螺钉 ASTM F836M-2002 1型不锈钢（米制）螺母技术规范 ASTM F837-2008 英制不锈钢圆柱头内六角螺钉 ASTM F837M-2002a 不锈钢凹头螺钉-米制 ASTM F844-2004 一般用途未淬火的扁平钢垫圈 ASTM F879-2008 不锈钢管座凸头及扁平沉头六角螺钉 ASTM F879M-2008 不锈钢管座凸头及扁平沉头六角螺钉 ASTM F880-2008 不锈钢凹头定位螺钉 ASTM F880M-2008 不锈钢凹头定位螺钉 ASTM F901-2007 铝制传输塔用螺栓及螺母 ASTM F912-2004 合金钢凹头定位螺钉 ASTM F912M-2004 合金钢凹头定位螺钉

ASTM F959-2005a 结构紧固件用可压缩垫圈型直接张力指示器

ASTM F959M-2004 用于结构紧固件的可压缩垫圈型张力直接指示器标准规范(米制) ASTM G131-1996(R2002) 超声法清洗材料和元部件的标准规程 ASTM R0017 公制国际单位制快速咨询题目指南 1 Fastener Standards

SAE J58 MAY1998 Flanged 12-Point Screws SAE J78 MAY1998 Steel Self-Drilling Tapping Screws SAE J81 SEP1997 Thread Rolling Screws

SAE J82 MAY1998 Mechanical and Quality Requirements for Machine Screws

SAE J121 APR1997 Decarburization in Hardened and Tempered Unified Threaded Fasteners

SAE J121M APR1997 Decarburization in Hardened and Tempered Metric Threaded Fasteners

SAE J122 MAY1998 Surface Discontinuities on Nuts

SAE J123 MAR1994 Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications

SAE J174 MAY1998 Torque-Tension Test Procedure for Steel Threaded Fasteners—Inch Series

SAE J174M MAY1998 Torque-Tension Test Procedure for Steel Threaded Fasteners—Metric Series

SAE J238 MAY1998 Nut and Conical Spring Washer Assemblies

SAE J429 JAN1999 Mechanical and Material Requirements for Externally Threaded Fasteners

SAE J430 JUL2007 Mechanical and Chemical Requirements for Nonthreaded Fasteners Carbon Steel Solid Rivets

SAE J482 APR2006 Hexagon High Nuts SAE J483 MAR2006 Crown (Blind, Acorn) Nuts

SAE J485 MAY1998 Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins SAE J492 JUN2005 Rivets and Riveting SAE J493 JUN1961 Rod Ends and Clevis Pins SAE J773 MAY1998 Conical Spring Washers

SAE J891 OCT2004 Spring Nuts

SAE J892 AUG1996 Push-On Spring Nuts Inch Series—General Specifications SAE J892M AUG1996 Push-On Spring Nuts Metric Series—General Specifications SAE J933 AUG2005 Mechanical and Quality Requirements for Tapping Screws SAE J995 JUL1999 Mechanical and Material Requirements for Steel Nuts

SAE J1053 AUG1996 Steel Stamped Nuts of One Pitch Thread Design—Inch Series SAE J1053M AUG1996 Steel Stamped Nuts of One Pitch Thread Design—Metric Series SAE Fastener Standards Manual 2009 Edition

SAE J1061 FEB2008 Surface Discontinuities on General Application Bolts, Screws, and Studs

SAE J1102 FEB1995 Mechanical and Material Requirements for Wheel Bolts

SAE J1102M MAR2001 Mechanical and Material Requirements for Metric Wheel Bolts SAE J1199 MAR2001 Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners

SAE J1200 MAY1998 Blind Rivets—Break Mandrel Type SAE J1237 MAR2001 Metric Thread Rolling Screws SAE J1648 AUG1996 Protective Coatings for Fasteners

SAE J1701 MAR1999 Torque-Tension Tightening for Inch Series Fasteners SAE J1701M JUL1996 Torque-Tension Tightening for Metric Series Fasteners SAE J2486 MAY1999 Tension Indicating Washer Tightening Method for Fasteners 2 Related Standards

SAE J401 APR2000 Selection and Use of Steels

SAE J402 JUL2005 SAE Numbering System for Wrought or Rolled Steel SAE J403 NOV2001 Chemical Compositions of SAE Carbon Steels SAE J404 JAN2009 Chemical Compositions of SAE Alloy Steels

SAE J405 JUN1998 Chemical Compositions of SAE Wrought Stainless Steels SAE J406 MAR2009 Methods of Determining Hardenability of Steels

SAE J409 FEB1995 Product Analysis—Permissible Variations from Specified Chemical Analysis of a Heat or Cast of Steel

SAE J411 SEP1997 Carbon and Alloy Steels

SAE J412 OCT1995 General Characteristics and Heat Treatments of Steels SAE J413 FEB2002 Mechanical Properties of Heat Treated Wrought Steels SAE J415 JUL1995 Definition of Heat Treating Terms

SAE J417 DEC1983 Hardness Tests and Hardness Number Conversions SAE J419 DEC1983 Methods of Measuring Decarburization

SAE J422 DEC1983 Microscopic Determination of Inclusions in Steels SAE J423 FEB1998 Methods of Measuring Case Depth SAE J864 MAY1993 Surface Hardness Testing with Files

SAE J935 FEB2002 High-Strength Carbon and Alloy Die Drawn Steels SAE J1086 JUL1995 Numbering Metals and Alloys

SAE J1099 AUG2002 Technical Report on Low Cycle Fatigue Properties Ferrous and Non-Ferrous Materials

SAE J1249 DEC2008 Former SAE Standard and Former SAE EX-Steels SAE J1268 MAY1995 Hardenability Bands for Carbon and Alloy H Steels

SAE J1397 MAY1992 Estimated Mechanical Properties and Machinability of Steel Bars SAE J1739 JAN2009 Potential Failure Mode and Effects Analysis in Design (Design FMEA) and Potential Failure Mode and Effects Analysis in Manufacturing and Assembly Processes (Process FMEA) Reference Manual

SAE J1868 SEP1993 Restricted Hardenability Bands for Selected Alloy Steels SAE J1975 NOV1997 Case Hardenability of Carburized Steels

本文来源：https://www.bwwdw.com/article/ho5x.html