系统下安装
更新时间:2024-03-27 16:51:01 阅读量: 综合文库 文档下载
LoadGenerator在unix(linux)下的安装及运行
Loadgenerator在unix和linux下的安装包可以在hp网站下到。安装难度应该不是很大,关键是安装完成后的环境变量设置,以及verify_generator.
安装完成后,/opt/HP/HP_LoadGenerator/会有一个env.csh。需要把它里面的环境变量加到.csh或.profile文件中。
? For C shell users, the startup configuration file is the .cshrc file
? For Bourne and Korn shell users, the startup configuration file is the .profile file.
我当时是在linux,bash环境下,所以在root目录找到.bashrc文件,添加以下几句话:
export PRODUCT_DIR=/opt/HP/HP_LoadGenerator
export M_LROOT=$PRODUCT_DIR
export LD_LIBRARY_PATH=${M_LROOT}/bin
export PATH=${M_LROOT}/bin:$PATH 需要注消再登录后bash生效。
然后运行/opt/HP/HP_LoadGenerator/bin目录下的verify_generator
结果提示:[root@localhost bin]# ./verify_generator
Environment variable M_LROOT must be set to the product directory in order for verify_generator to execute.
Please setenv/export (csh/sh) it and run verify_generator again
通过[root@localhost bin]# env |grep PRODUCT_DIR 输出:exportT_DIR=/opt/HP/HP_LoadGenerator 于是尝试用切换到csh环境 [root@localhost bin]# csh 再次运行verify_generator 提示如下:
[root@localhost bin]# ./verify_generator
=================================================== HP
Vuser Environment Verification Utility
===================================================
Product: HP LoadRunner 9.50 Version: 09.50.0000 Build: 3378
verify_generator can not run as superuser, please login again
切换到普通用户:
[root@localhost bin]# su lxj bash: /home/lxj/.bashrc: 权限不够 bash-3.1$ bash-3.1$ bash-3.1$ bash-3.1$ bash-3.1$ bash-3.1$ csh
再次运行verify_generator
[lxj@localhost bin]$ ./verify_generator
=================================================== HP
Vuser Environment Verification Utility
===================================================
Product: HP LoadRunner 9.50 Version: 09.50.0000 Build: 3378
localhost.localdomain:
verify_generator...OK verify_generator...OK verify_generator...OK
Warning: The file .rhosts does not exist in the home directory of the user. Verify $M_LROOT ...Failed
_____It was not possible to set the $M_LROOT from
_____the shell dot files. One of several things might be happening: _____1) $M_LROOT is not set at all in the shell dot files.
_____2) There is some error in the shell dot files which stops their execution _____ before it sets $M_LROOT.
_____3) There is conditional code in the shell dot files (most likely related to _____ interactive and non interactive shells) and $M_LROOT is set _____ only in one of the sections.
_____Aborting virtual user tests on host localhost.localdomain verify_generator...OK
看到了大家期望的ok.
至于和Controller Connection
有两种方式:
Checking Controller Connection
By default, the Controller connects remotely to the load generator using rsh (remote shell). You need to make sure that the load generator can be remotely accessed by the Controller.
To make sure that the load generator can be remotely accessed by the Controller:
1 On the load generator machine, go to the .rhosts file, located in the user home directory.
2 In the .rhosts file, verify that the Controller is included in the list of machines. If it is not listed, add it to the list.
If the Controller still cannot connect to the load generator, contact your system administrator.
Note: You can configure the Controller to connect to the load generator not using rsh. In this case, you need to activate the agent daemon on the load generator. For more information, see the “Connecting to a UNIX Load Generator Without Using RSH” below.
Connecting to a UNIX Load Generator Without Using RSH
This section describes how to connect to a UNIX load generator without using RSH.
To connect to a UNIX load generator without RSH:
1 On the UNIX load generator, run the agent daemon by running the following command from
This runs a daemon called m_agent_daemon, and if successful you will receive a message: m_agent_daemon
The agent will now keep running, even if the user is logged off. It will only stop running using the command explained in step 3 below, or by rebooting the machine.
Note: If you look at the log file m_agent_daemon[xxx].log in the temp directory, you may see communication errors, even if the installation succeeded:
These messages appear because the LoadRunner agent always tries to open port number 443 (because any agent can be a MI Listener, and the MI
Listener always listens to this port), and in UNIX machines, this port cannot be opened by any user except for the root user. However, this will not interfere with using this agent for the load generator.
2 In the Controller, in the Generators > Load Generator Information > UNIX Environment tab, select the Don’t use RSH option. Connect as usual. 3 To stop the agent daemon, run the following command from the
This stops the m_agent_daemon, and if successful, you will receive a message: m_agent_daemon is down.
rsh方式,记得Controller机器需要有rsh客户端。
正在阅读:
系统下安装03-27
青年教师听课心得体会10-31
经济生活备课素材大全:高中政治备课素材精颈匦 经济生活 8-2 征税与纳税 精品 - 图文11-29
超全面的塑胶材料知识(1)08-18
课程设计报告 - -Java实现游戏连连看 - 图文12-27
哲学概论读后感01-16
2016尔雅传统文化与现代经营管理03-14
力控组态软件使用指南09-13
物理化学上册的答案_第五版_周亚平_高等教育出版社04-13
服装网店网络广告提案03-08
- 多层物业服务方案
- (审判实务)习惯法与少数民族地区民间纠纷解决问题(孙 潋)
- 人教版新课标六年级下册语文全册教案
- 词语打卡
- photoshop实习报告
- 钢结构设计原理综合测试2
- 2014年期末练习题
- 高中数学中的逆向思维解题方法探讨
- 名师原创 全国通用2014-2015学年高二寒假作业 政治(一)Word版
- 北航《建筑结构检测鉴定与加固》在线作业三
- XX县卫生监督所工程建设项目可行性研究报告
- 小学四年级观察作文经典评语
- 浅谈110KV变电站电气一次设计-程泉焱(1)
- 安全员考试题库
- 国家电网公司变电运维管理规定(试行)
- 义务教育课程标准稿征求意见提纲
- 教学秘书面试技巧
- 钢结构工程施工组织设计
- 水利工程概论论文
- 09届九年级数学第四次模拟试卷
- 安装
- 系统