MDM-25PBSM7-TL58A141中文资料

Micro-D PCB - .050" Contact SpacingMDM-PCB

MDM-PCB connectors are designed for usewith flex circuitry, flat cable and printed circuitboards or multi-layer boards. They use thestandard MDM metal shell and provide highdensity and high reliability in board-to-board,board-to-cable and cable-to-cable applications.MDM-PCB connectors are available in 8 shellsizes with 9 to 100 contacts. Terminationsmay be straight (BS) or at 90 right angle (BR,CBR) board thickness. Jackpost mounting foruse with locking hardware is also available.

How to Order - MDM-PCB Series

R

RoHS COMPLIANCESERIES

INSULATOR MATERIAL CONTACT

ARRANGEMENT

CONTACTTYPE TERMINATION TYPE

MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB

TERMINATION TAIL LENGTH MODIFICATION CODE SHELL FINISH MODIFICATION CODES

SERIES

MDM - Micro "D" Metal ShellINSULATOR MATERIAL

Liquid Crystal Polymer (LCP)CONTACTARRANGEMENT

9, 15, 21, 25, 31, 37, 51, and 100

TERMINATION TYPE

BS - Straight PCB TerminationBR - Right Angle PCB Termination

CBR - Right Angle Narrow Profile PCB TerminationsMOUNTING HARDWARE (Shell Flange)

P-JackpostsM7 - Jackposts M83513/5-07 (Sizes 9-51)M17 - Jackposts

M83513/5-17 (Size 100)No letter - noneMOUNTING HARDWARE FOR PCBT-Threaded Insert

#2-56 Thd for Shell Sizes 9 thru 51 #4-40 Thd for Shell Size 100No letter - none

TERMINATION TAIL LENGTH MODIFICATION CODENone - .109 (2.77) ±.015 (0.38) StandardL61 - .125 (3.18)L56 - .150 (3.81)L57 - .190 (4.83)L39 - .250 (6.35)L58 - .375 (9.52)SHELL FINISH MODIFICATION CODES

None - Yellow Chromate/Cadmium over NickelA174 - Electroless NickelA172 - Gold over NickelA141 - Irridite/AlodineA30 - Black Anodize(For special modification codes, consult customer service.)MDM * - 25P

BS

P- T

L39 A174

CONTACTTYPE

P-Pin (Plug)

S-Socket (Receptacle)

NOTE: Back molding material – Epoxy Hysol #MG40FS

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

18

Micro-D PCB - .050" Contact Spacing

BS (Board Straight) Series

.186 (4.72) MAX. PLUG

MDM-PCB

.120 ± .005(3.05 ± 0.13)Size 100

(9-51).JACKPOST(100)#4-40 UNC-2B TYP.

.109 ± 0.15(2.77 ± 0.38)

REF.

PCB Termination Arrangements* (Viewed from PCB solderside)

Identification number shown for plug connector, use reverse orderfor socket connector.

.050(1.27)

NOTE: Dimensions shown are forreference only-consult factory for final design dimensions.

.050.050(1.27)

.050TYP.

.1509Contacts15 Contacts

.05021 Contacts

.050.100TYP.

25 Contacts

.15031 Contacts51 Contacts

100 Contacts

NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dippedAll Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27)

PartNumberBy Shell SizeMDM-9PBS*MDM-9SBS*MDM-15PBS*MDM-15SBS*MDM-21PBS*MDM-21SBS*MDM-25PBSMDM-25SBS*MDM-31PBS*MDM-31SBS*MDM-37PBS*MDM-37SBS*MDM-51PBS*MDM-51SBS*MDM-100PBS*

AMax.1.390 (35.31)1.390 (35.31)1.390 (35.31)1.390 (35.31)1.690 (43.93)1.690 (43.93)1.740 (44.20)1.740 (44.20)2.040 (51.82)2.040 (51.82)2.340 (59.44)2.340 (59.44)2.270 (67.66)2.270 (67.66)3.070 (77.98)

B

±.007 (.18)1.150 (29.21)1.150 (29.21)1.150 (29.21)1.150 (29.21)1.450 (36.83)1.450 (36.83)1.500 (38.10)1.500 (38.10)1.800 (45.72)1.800 (45.72)2.100 (53.34)2.100 (53.34)2.000 (50.80)2.000 (50.80)2.800 (71.12)

C

±.005 (.13).565 (14.35).565 (14.35).715 (18.16).715 (18.16).865 (21.97).865 (21.97).965 (24.51).965 (24.51)1.115 (28.32)1.115 (28.32)1.265 (32.13)1.265 (32.13)1.215 (30.86)1.215 (30.86)1.800 (45.72)

DMax..785 (19.94).785 (19.94).935 (23.75).935 (23.75)1.085 (27.56)1.085 (27.56)1.185 (30.10)1.185 (30.10)1.335 (33.91)1.335 (33.91)1.485 (37.72)1.485 (37.72)1.435 (36.45)1.435 (36.45)2.175 (55.24)EMax..334 (8.48).402 (10.21).484 (12.29).552 (13.97).634 (16.10).702 (17.83).734 (18.64).802 (20.37).884 (22.45).952 (24.18)1.034 (26.26)1.102 (27.99).984 (24.99)1.052 (26.72)1.384 (35.15)FMax..185 (4.70).253 (6.43).185 (4.70).253 (6.43).185 (4.70).253 (6.43).185 (4.70).253 (6.43).185 (4.70).253 (6.43).185 (4.70).253 (6.43).228 (5.79).296 (7.52).271 (6.88)GMax..308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).351 (8.92).351 (8.92).460 (11.68)HMax..165 (4.19).165 (4.19).165 (4.19).165 (4.19).165 (4.19).165 (4.19).165 (4.19).165 (4.19).165 (4.19).165 (4.19).165 (4.19).165 (4.19).165 (4.19).165 (4.19)

JMax..355 (9.02).355 (9.02).355 (9.02).355 (9.02).355 (9.02).355 (9.02).355 (9.02).355 (9.02).355 (9.02).355 (9.02).355 (9.02).355 (9.02).355 (9.02).355 (9.02)

KMax..555 (14.10).555 (14.10).555 (14.10).555 (14.10).555 (14.10).555 (14.10).555 (14.10).555 (14.10).555 (14.10).555 (14.10).555 (14.10).555 (14.10).555 (14.10).555 (14.10).686 (17.42).303 (7.70).550 (12.70)19

Micro-D PCB - .050" Contact Spacing

BR (Board Right Angle) Series

.100TYP.

MDM-PCB

PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.)Identification number shown for plug connector, use reverse order for socket connector.

.150.150.150.150.300

(5.72)

(4.45)

9Contacts

.15015Contacts21 Contacts

.150(3.81)

25 Contacts

31 Contacts37 Contacts51 Contacts

1

2

3

4

5

6

7

8

910

11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

100 Contacts

NOTE: Standard lead termination is #24 AWG, gold plated, solid copper, solder or tin dripped.All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27).

Part NumberBy Shell SizeMDM-9PBR*MDM-9SBR*MDM-15PBR*MDM-15SBR*MDM-21PBR*MDM-21SBR*MDM-25PBR*MDM-25SBR*MDM-31PBR*MDM-31SBR*MDM-37PBR*MDM-37SBR*MDM-51PBR*MDM-51SBR*MDM-100PBR*MDM-100SBR*

AMax.1.390 (35.31)1.390 (35.31)1.540 (39.12)1.540 (39.12)1.690 (42.93)1.690 (42.93)1.790 (45.47)1.790 (45.47)2.040 (51.82)2.040 (51.52)2.340 (59.44)2.340 (59.44)1.875 (47.63)1.875 (47.63) 2.74 (69.72) 2.74 (69.72)

B

±.007 (.18)1.150 (29.21)1.150 (29.21)1.300 (33.02)1.300 (33.02)1.450 (36.83)1.450 (36.83)1.550 (39.37)1.550 (39.37)1.800 (45.72)1.800 (45.72)2.100 (53.34)2.100 (53.34)1.600 (40.64)1.600 (40.64)2.500 (63.50)2.500 (63.50)

C

±.005 (.13).565 (14.35).565 (14.35).715 (18.16).715 (18.16).865 (21.97).865 (21.97).965 (24.51).965 (24.51)1.115 (28.32)1.115 (28.32)1.265 (32.13)1.265 (32.13)1.215 (30.86)1.215 (30.86)1.800 (45.72)1.800 (45.72)

DMax..334 (8.48).402 (10.21).484 (12.29).552 (13.97).634 (16.10).702 (17.83).734 (18.64).802 (20.37).884 (22.45).952 (24.18)1.034 (26.26)1.102 (27.99).984 (24.99)1.052 (26.72)1.384 (35.15)1.508 (38.10)

EMax..185 (4.70).253 (6.43).185 (4.70).253 (6.43).185 (4.70).253 (6.43).185 (4.70).253 (6.43).185 (4.70).253 (6.43).185 (4.70).253 (6.43).228 (5.79).296 (7.52).271 (6.88).394 (10.01)

FMax..455 (11.56).455 (11.56).455 (11.56).455 (11.56).455 (11.56).455 (11.56).455 (11.56).455 (11.56).455 (11.56).455 (11.56).455 (11.56).455 (11.56).565 (14.35).565 (14.35).755 (19.18).755 (19.18)

GMax..308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).308 (7.82).351 (8.92).351 (8.92).394 (10.01).394 (10.01)

*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

20

Micro-D PCB - .050" Contact Spacing

CBR(Condensed Board Right Angle) Series

MDM-PCB

JACKPOST2-56..186 (4.72)MAX.PLUG.198 (5.03)JACKPOST.

DIA.TYP.(Size 9-51)

**FOR 31: 1.085(27.56) MAX.FOR 37: 1.185(30.10) MAX.FOR 51: 1.225(31.12) MAX.

100 VIEW

PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.)Identification number shown for plug connector, use reverse orderfor socket connector.

.108.0209ContactsView X

15ContactsView X

.02021ContactsView X

25 ContactsView X

26

24515075

224948

21192047

1845467172969570

17164342

15144165

13123938636488

1110

98

763332

5431

2

37353461

59608485

292730

7374

6967689493

575882

55568081

53547879

527677

669091

628687

100

99

9897

(2.54 ± 0.13)

8983

31 ContactsView Y37 ContactsView Y51 ContactsView Y100 ContactsView W

All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27). By Shell SizeMax..785 (19.94) .785 (19.94) .935 (23.75) .935 (23.75) 1.085 (27.56) 1.085 (27.56) 1.185 (30.10) 1.185 (30.10) 1.435 (36.45) 1.435 (36.45) 2.170 (55.12) 2.170 (55.12)

±.005 (.13).565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.215 (30.86) 1.215 (30.86) 1.800 (45.72) 1.800 (45.72)

Max..334 (8.48) .402 (10.21) .484 (12.29) .552 (13.97) .634 (16.10) .702 (17.83) .734 (18.64) .802 (20.37) .984 (24.99) 1.052 (26.72) 1.384 (35.15) 1.508 (38.10)

Max..308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .351 (8.92) .351 (8.92) .394 (10.01) .394 (10.01)

NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dripped. Max..185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .184 (4.70) .253 (6.43) .228 (5.79) .296 (7.52) .271 (6.88) .394 (10.01)

Max..420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .650 (16.15) .650 (16.15) 1.000 (25.40) 1.000 (25.40)

±.010 (.25).250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .300 (7.62) .300 (7.62) .400 (10.16) .400 (10.16)

±.010 (.25).230 (5.81) .230 (5.81) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .150 (3.81) .150 (3.81) .200 (5.08) .200 (5.08)

*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

21

本文来源：https://www.bwwdw.com/article/fr74.html