邻苯二甲酸二辛酯的合成 - 论文
更新时间:2023-11-15 01:41:01 阅读量: 教育文库 文档下载
太原科技大学毕业设计(论文)
邻苯二甲酸二辛酯的合成研究及相关性能的研究
摘 要
邻苯二甲酸二辛酯(DOP) 是一种最广泛使用的增塑剂,具有良好的综合性能,增塑效率高,挥发性较低,低温柔软性较好,耐热性和耐候性良好,具有良好的工业化前景合成
植物酯与PVC树脂粉有着非常优异的相溶性。 抑制析出冒油,浅黄无异味,抗低温性能优异,零下18度不结晶,冬天正常使用。生产出的塑料制品具有较高的机械性能、优异的胶凝能力,耐皂化和低的迁移性,电阻性能良好,低温时有显著的稳定性。。
本文以异辛醇(2-乙基己醇)和邻苯二甲酸酐(苯酐)为原料,在催化剂作用下合成增塑剂邻苯二甲酸二辛酯(DOP)。分别以氧化铝、氧化锌、乙酸锌、辛酸亚锡、对甲苯磺酸5种单体催化剂及其以一定比例相互复配的乙酸锌/对甲苯磺酸、辛酸亚锡/氧化铝、氧化锌/氧化铝、辛酸亚锡/氧化锌4种复配催化剂合成DOP,考察催化剂对合成DOP的影响,以及相关性能的研究,结果表明,氧化铝与辛酸亚锡以1∶1比例复配为最佳催化剂,并考察了反应条件对合成DOP 的影响,结果表明,在异辛醇与苯酐摩尔比3∶1,辛酸亚锡/氧化铝复配催化剂用量分别占反应物总量的0.2%,反应温度230℃,反应时间2.5 h的最佳工艺条件下,反应物酯化率达91.79%。
关键词: 邻苯二甲酸二辛酯 催化剂 反应温度 醇酐摩尔比
I
ABSTRACT
Study of the Synthesis of dioctyl phthalate
Abstract
Dioctyl phthalate (DOP) is one of the most widely used plasticize, high plasticizing efficiency, low volatility, good low temperature flexibility, good heat resistance and weatherability, and has good prospects for industrialization.
In this paper,using isooctanol (2 - ethylhexyl alcohol) and phthalic anhydride (phthalic anhydride) as raw materials, DOP is syntheticed with a catalyst. Respectively, alumina, zinc oxide, zinc acetate, zinc octoate, stannous, p-toluenesulfonic acid monomers catalyst and complex with each other to a certain percentage of zinc acetate / p-toluenesulfonic acid, stannous octoate / alumina, alumina / zinc oxide, zinc oxide / stannous octoate the complex catalyst synthesis DOP. Study shows that alumina and stannous octoate catalyst mixed in a 1:1 ratio is the best.The reearch of reaction conditions shows that the optimum condition is isooctyl alcohol and phthalic anhydride mole ratio of 3:1, the stannous tin / alumina complex catalyst amount, respectively, accounting for 0.2% of the total amount of reactants, the reaction temperature of 230 ° C, reaction time 2.5 h, the rate of esterification is 91.79%.
Key words: Phthalate dioctyl phthalate;Catalyst;Reaction temperature;Alcohol anhydride more ratio
II
太原科技大学毕业设计(论文)
目 录
摘 要 ................................................................................................................................................ I ABSTRACT ................................................................................................................................. III 第一章 绪 论 ................................................................................................................................. 1
1.1邻苯二甲酸二辛酯的简介 ............................................................................................... 1
1.1.1 邻苯二甲酸二辛酯的物性 ................................................................................... 1 1.1.2 邻苯二甲酸二辛酯的用途 ................................................................................... 1 1.2不同催化剂合成邻苯二甲酸二辛酯 ............................................................................... 2
1.2.1酸性催化合成邻苯二甲酸二辛酯 ........................................................................ 2 1.2.2钛酸酯催化合成邻苯二甲酸二辛酯 .................................................................... 2 1.2.3氧化物催化合成邻苯二甲酸二辛酯 .................................................................... 3 1.2.4锡类化合物催化合成邻苯二甲酸二辛酯 ............................................................ 3 1.2.5铝酸钠催化合成邻苯二甲酸二辛酯 .................................................................... 3 1.2.6固体酸催化合成邻苯二甲酸二辛酯 .................................................................... 4 1.2.7杂多酸催化合成邻苯二甲酸二辛酯 .................................................................... 4 1.2.8酸性树脂催化合成邻苯二甲酸二辛酯 ................................................................ 4 1.2.9离子液体催化合成邻苯二甲酸二辛酯 ................................................................ 5 1.2.10新型复合材料催化合成邻苯二甲酸二辛酯 ...................................................... 5 1.3邻苯二甲酸二辛酯在国民经济中的重要性 ................................................................... 5 1.4 邻苯二甲酸二辛酯的市场需求 ...................................................................................... 6 1.5本课题研究的意义 ........................................................................................................... 6 第二章 实验部分 ........................................................................................................................... 7
2.1反应原料 ........................................................................................................................... 7 2.2 实验仪器 .......................................................................................................................... 7 2.3合成原理 ........................................................................................................................... 8 2.4反应装置 ........................................................................................................................... 8 2.5实验步骤 ........................................................................................................................... 8
2.5.1酯化 ........................................................................................................................ 8
III
目录
2.5.2中和分离 ................................................................................................................ 9 2.5.3精制分馏 ................................................................................................................ 9 2.6检测方法 ........................................................................................................................... 9
2.6.1外观测定 ................................................................................................................ 9 2.6.2酯化率测定 ............................................................................................................ 9
第三章 结果与讨论 ................................................................................................................... 10
3.1催化剂的确定 ................................................................................................................. 10
3.1.1单催化剂对酯化率的影响 .................................................................................. 10 3.1.2复配催化剂对酯化率的影响 .............................................................................. 10 3.2催化剂用量对酯化率的影响 ......................................................................................... 11 3.3醇酐摩尔比对酯化率的影响 ......................................................................................... 12 3.4反应温度对酯化率的影响 ............................................................................................. 12 第四章 结 论 ............................................................................................................................. 14 参考文献 ....................................................................................................................................... 15 致 谢 ........................................................................................................................................... 16
IV
正在阅读:
邻苯二甲酸二辛酯的合成 - 论文11-15
河北政法职业学院大学生思想政治教育工作自测自评报告03-09
梅花香自苦寒来作文500字06-22
基坑支护施工技术 Microsoft Word 文档08-27
2019届最新高考生物一轮复习 必修3 第8单元 第1讲 人体的内环境与稳态11-22
六一儿童节作文500字07-08
小学老师实习报告(2016优秀范文)03-31
圆的认识课堂实录04-26
- exercise2
- 铅锌矿详查地质设计 - 图文
- 厨余垃圾、餐厨垃圾堆肥系统设计方案
- 陈明珠开题报告
- 化工原理精选例题
- 政府形象宣传册营销案例
- 小学一至三年级语文阅读专项练习题
- 2014.民诉 期末考试 复习题
- 巅峰智业 - 做好顶层设计对建设城市的重要意义
- (三起)冀教版三年级英语上册Unit4 Lesson24练习题及答案
- 2017年实心轮胎现状及发展趋势分析(目录)
- 基于GIS的农用地定级技术研究定稿
- 2017-2022年中国医疗保健市场调查与市场前景预测报告(目录) - 图文
- 作业
- OFDM技术仿真(MATLAB代码) - 图文
- Android工程师笔试题及答案
- 生命密码联合密码
- 空间地上权若干法律问题探究
- 江苏学业水平测试《机械基础》模拟试题
- 选课走班实施方案
- 邻苯二甲酸
- 合成
- 论文
- 辛酯的
- 纪录片《帝陵·汉元帝渭陵》解说词
- 14级计算机网络试题
- 事业单位绩效考核实施方案
- Illustrator练习试卷 - 图文
- PLC,人机界面,32路温度控制系统案例
- 产业园管理办法
- 因子分析的步骤
- 决策理论和方法习题
- 509模拟法庭剧本(最终版) - 图文
- IP101单端口快速以太网收发器(中文版) - 图文
- 王艳玲市长在全市平安建设工作会议上的讲话
- 2015年秋季七年级上第一次月考数学试题
- 2016年5月尔雅考古发现与探索期末考试答案最新
- 《学前教育史》复习资料
- 1、在EDTA配位滴定中,下列叙述正确的是()
- 二年级下册数学《分食品》第二课时教案
- 九江2018年江西百千万人才工程推荐人选情况一览表
- 汪集中学学习雷锋体验活动案例
- 优先股的实质
- 实验二 74HC138译码器实验(学生)