P0220SCMCL中文资料

MicroCapacitance (MC) SC SIDACtor® Device

These DO-214AA SCMC SIDACtor devices are intended for applications sensitive to load values. Typically, high speed connections, such as xDSL and T1/E1, require a lower

capacitance. CO values for the MicroCapacitance device are 40 percent lower than a standard SC part.

This SCMC SIDACtor series enables equipment to comply with various regulatory

requirements including GR1089, IEC60950, UL60950, TIA-968-A (formerly known as FCC Part68), and ITU K.20, K.21, and K.45.

Electrical Parameters

PartNumber *P0080SCMCLP0220SCMCLP0300SCMCLP0640SCMCLP0720SCMCLP0900SCMCLP1100SCMCLP1200SCMCLP1300SCMCLP1500SCMCLP1800SCMCLP2000SCMCLP2100SCMCLP2300SCMCLP2500SCMCLP2600SCMCLP3100SCMCLP3500SCMCL

VDRMVolts6152558657590100120140170180180190230220275320

VSVolts253240778898130130160180220220240260290300350400

VTVolts444444444444444444

IDRMµAmps555555555555555555

ISmAmps800800800800800800800800800800800800800800800800800800

ITAmps2.22.22.22.22.22.22.22.22.22.22.22.22.22.22.22.22.22.2

IHmAmps505050150150150150120150150150120150150120150150150

* “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number.For surge ratings, see table below.

General Notes:

All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range. IPP is a repetitive surge rating and is guaranteed for the life of the product. Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities. VDRM is measured at IDRM. VS is measured at 100V/µs.

Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.

Surge Ratings in Amps

Series

IPP

0.2x310 *2x10 *8x20 *0.5x700 **2x10 **1.2x50 **AmpsC

50

Amps500

Amps400

10x160 *10x160 **Amps200

10x560 *10x560 **Amps150

5x320 *9x720 **Amps200

10x360 *10x1000 *5x310 *ITSM10x360 **10x1000 **10x700 **50 / 60 HzAmps175

Amps100

Amps200

Amps30

di/dtAmps/µs500

* Current waveform in µs** Voltage waveform in µs

Telecom Design Guide © 2006 Littelfuse3 -

SIDACtor Devices

MicroCapacitance (MC) SC SIDACtor® Device

Thermal Considerations

Capacitance Values

pF

Part NumberP0080SCMCLP0220SCMCLP0300SCMCLP0640SCMCLP0720SCMCLP0900SCMCLP1100SCMCLP1200SCMCLP1300SCMCLP1500SCMCLP1800SCMCLP2000SCMCLP2100SCMCLP2300SCMCLP2500SCMCLP2600SCMCLP3100SCMCLP3500SCMCL

MIN353025555045454540353535303030303025

MAX756545857570706560555050505045454540

Note: Off-state capacitance (CO) is measured at 1MHz with a 2V bias.

3 - 6© 2006 Littelfuse Telecom Design Guide

MicroCapacitance (MC) SC SIDACtor® Device

V-I Characteristics

tr x td Pulse Waveform

Normalized VS Change versus Junction Temperature

Normalized DC Holding Current versus Case Temperature

Telecom Design Guide © 2006 Littelfuse3 -

SIDACtor Devices

本文来源：https://www.bwwdw.com/article/en71.html