B32686-A334-M中文资料

元器件交易网

Metallized Polypropylene (MKP/MFP)

Series/Type:

B32682

The following products presented in this data sheet are being withdrawn.

元器件交易网

Metallized Polypropylene Film Capacitors (MFP)in Plastic Case

Wound MFP pulse capacitors

with highest possible contact reliabilityConstruction

IDielectric: polypropylene

IFilm metallized on one side and

B32682…B32686

metal foils internally connected in series

IPlastic case (UL 94 V-0)IEpoxy resin sealing

Features

IVery high pulse strength

IHighest possible contact reliabilityISelf-healing properties

Typical applications

IPulse circuits with steep voltage rise ratesIHigh-frequency ac loads

ISnubbering of power semiconductors

Terminals

IParallel wire leads, tinned

IAlso available with (3,2 ± 0,3) mm lead length

Marking

Manufacturer’s logo, lot numberstyle (MFP),

rated capacitance (coded),

capacitance tolerance (code letter),rated dc voltage,

date of manufacture (coded)Delivery mode

Bulk (untaped)

Taped (Ammo pack or reels)

For notes on taping, refer to chapter “Taping and packing”, page274.

179

12/00

元器件交易网

MFPB32682…B32686

Overview of available types LeadspacingTypePage0,15nF0,33nF0,68nF1,5nF3,3nF6,8nF15nF33nF68nF0,15µF

15 mmB 32 682181

22,5 mmB 32 683182

1250 Vdc 450 Vac

1000 Vdc 400 Vac

1600 Vdc 450 Vac

2000 Vdc 500 Vac

630 Vdc300 Vac

LeadspacingTypePage22nF47nF0,10µF0,22µF0,47µF

27,5 mmB 32 684183

2000 Vdc 500 Vac

37,5 mmB 32 686184

630 Vdc 300 Vac

1000 Vdc 400 Vac

1250 Vdc 450 Vac

1250 Vdc 450 Vac

1600 Vdc 450 Vac

1000 Vdc400 Vac

630 Vdc 300 Vac

180

12/00

1000 Vdc400 Vac

1250 Vdc450 Vac

1600 Vdc450 Vac

2000 Vdc500 Vac1600 Vdc450 Vac

2000 Vdc 500 Vac

元器件交易网

B32682MFP

15

Ordering codes and packing units, lead spacing 15 mm VR

(Vrms, f ≤ 1 kHz)630 Vdc(300 Vac)

CR

Maximumdimensionsb × h × l (mm)5,0 × 10,5 × 18,05,0 × 10,5 × 18,05,0 × 10,5 × 18,06,0 × 11,0 × 18,07,0 × 12,5 × 18,08,5 × 14,5 × 18,09,0 × 17,5 × 18,06,0 × 11,0 × 18,07,0 × 12,5 × 18,08,5 × 14,5 × 18,09,0 × 17,5 × 18,05,0 × 10,5 × 18,06,0 × 11,0 × 18,07,0 × 12,5 × 18,08,5 × 14,5 × 18,09,0 × 17,5 × 18,05,0 × 10,5 × 18,06,0 × 11,0 × 18,07,0 × 12,5 × 18,08,5 × 14,5 × 18,09,0 × 17,5 × 18,05,0 × 10,5 × 18,05,0 × 10,5 × 18,05,0 × 10,5 × 18,05,0 × 10,5 × 18,05,0 × 10,5 × 18,05,0 × 10,5 × 18,05,0 × 10,5 × 18,06,0 × 11,0 × 18,07,0 × 12,5 × 18,08,5 × 14,5 × 18,09,0 × 17,5 × 18,0

Ordering code1)

Packing units (pcs)Ammopack117011701170 960 830 680 640 960 830 680 6401170 960 830 680 6401170 960 830 680 6401170117011701170117011701170 960 830 680 640

Reel1300130013001100 900 700 7001100 900 700 70013001100 900 700 70013001100 900 700 70013001300130013001300130013001100 900 700 700

Untaped10001000100010001000 500 50010001000 500 500100010001000 500 500100010001000 500 500100010001000100010001000100010001000 500 500

(400 Vac)

1250 Vdc(450 Vac)

1600 Vdc(450 Vac)

2000 Vdc(500 Vac)

4,7 nF6,8 nF10 nF15 nF22 nF33 nF47 nF4,7 nF6,8 nF10 nF15 nF2,2 nF3,3 nF4,7 nF6,8 nF10 nF1,5 nF2,2 nF3,3 nF4,7 nF6,8 nF0,10 nF0,15 nF0,22 nF0,33 nF0,47 nF0,68 nF1,0 nF1,5 nF2,2 nF3,3 nF4,7 nF

B32682-A6472-+***B32682-A6682-+***B32682-A6103-+***B32682-A6153-+***B32682-A6223-+***B32682-A6333-+***B32682-A6473-+***B32682-A472-+***B32682-A682-+***B32682-A103-+***B32682-A153-+B32682-A7222-+***B32682-A7332-+***B32682-A7472-+***B32682-A7682-+***B32682-A7103-+B32682-A1152-+***B32682-A1222-+***B32682-A1332-+***B32682-A1472-+***B32682-A1682-+B32682-A2101-+***B32682-A2151-+***B32682-A2221-+***B32682-A2331-+***B32682-A2471-+***B32682-A2681-+***B32682-A2102-+***B32682-A2152-+***B32682-A2222-+***B32682-A2332-+***B32682-A2472-+Capacitance tolerance: ±10 % = K, ±5 % = J, (±3,5 % upon request)

1)+ Code letter for capacitance tolerance

***Code number for packing: Ammo pack = 289, reel = 189

The ordering code for untaped components ends after the tolerance code letter.

For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32682-A6472-K3

181

12/00

元器件交易网

MFP

22,5

B32683

Ordering codes and packing units, lead spacing 22,5 mmVR

(Vrms, f ≤ 1 kHz)630 Vdc(300 Vac)

CR

Maximumdimensionsb × h × l (mm) 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,510,5 × 16,5 × 26,511,0 × 20,5 × 26,5 6,0 × 15,0 × 26,5 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,510,5 × 18,5 × 26,5 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,510,5 × 18,5 × 26,5 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,510,5 × 18,5 × 26,5 6,0 × 15,0 × 26,5 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,510,5 × 16,5 × 26,511,0 × 20,5 × 26,5

Ordering code1)

Packing units (pcs)Ammopack680580480390370680680580480390680580480390680580480390680680580480390370

Reel700600500400350700700600500400700600500400700600500400700700600500400350

Untaped720630510540510720720630510540720630510540720630510540720720630510540510

1000 Vdc(400 Vac)

1250 Vdc(450 Vac)

1600 Vdc(450 Vac)

2000 Vdc(500 Vac)

33 nF47 nF68 nF0,10 µF0,15 µF10 nF15 nF22 nF33 nF47 nF10 nF15 nF22 nF33 nF6,8 nF10 nF15 nF22 nF2,2 nF3,3 nF4,7 nF6,8 nF10 nF15 nF

B32683-A6333-+***B32683-A6473-+***B32683-A6683-+***B32683-A6104-+***B32683-A6154-+B32683-A103-+***B32683-A153-+***B32683-A223-+***B32683-A333-+***B32683-A473-+B32683-A7103-+***B32683-A7153-+***B32683-A7223-+***B32683-A7333-+B32683-A1682-+***B32683-A1103-+***B32683-A1153-+***B32683-A1223-+B32683-A2222-+***B32683-A2332-+***B32683-A2472-+***B32683-A2682-+***B32683-A2103-+***B32683-A2153-+Capacitance tolerance: ±10 % = K, ±5 % = J, (±3,5 % upon request)

1)+ Code letter for capacitance tolerance

*** Code number for the packing: Ammo pack = 289, reel = 189

The ordering code for untaped components ends after the tolerance code letter.

For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32683-A6154-K3

182

12/00

元器件交易网

B32684MFP

27,5

Ordering codes and packing units, lead spacing 27,5 mmCRVR

(Vrms, f ≤ 1 kHz)

630 Vdc0,15 µF(300 Vac)0,22 µF

0,33 µF0,47 µF

1000 Vdc68 nF(400 Vac)0,10 µF

0,15 µF

(450 Vac)68 nF

0,10 µF0,15 µF

1600 Vdc33 nF(450 Vac)47 nF

68 nF0,10 µF

2000 Vdc15 nF(500 Vac)22 nF

33 nF47 nF

Maximumdimensionsb × h × l (mm)11,0 × 21,0 × 31,512,5 × 21,5 × 31,515,0 × 24,5 × 31,518,0 × 27,5 × 31,511,0 × 21,0 × 31,512,5 × 21,5 × 31,518,0 × 27,5 × 31,513,5 × 23,0 × 31,515,0 × 24,5 × 31,519,0 × 30,0 × 31,511,0 × 21,0 × 31,512,5 × 21,5 × 31,515,0 × 24,5 × 31,519,0 × 30,0 × 31,511,0 × 21,0 × 31,511,0 × 21,0 × 31,514,0 × 24,5 × 31,518,0 × 27,5 × 31,5

Ordering code1)

Packing units (pcs)Ammopack––––––––––––––––––

Reel Untaped350300––350300–250––350300––350350––

320280240200320280200260240180320280240180320320260200

B32684-A6154-+***B32684-A6224-+***B32684-A6334-+B32684-A6474-+B32684-A683-+***B32684-A104-+***B32684-A154-+***B32684-A7683-+***B32684-A7104-+B32684-A7154-+B32684-A1333-+***B32684-A1473-+***B32684-A1683-+B32684-A1104-+B32684-A2153-+***B32684-A2223-+***B32684-A2333-+B32684-A2473-+

Capacitance tolerance: ±10 % = K, ±5 % = J, (±3,5 % upon request)

1) + Code letter for capacitance tolerance

*** Code number for packing: Reel = 189

The ordering code for untaped components ends after the tolerance code letter.

For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32684-A6154-K3

183

12/00

元器件交易网

MFP

37,5

B32686

Ordering codes and packing units, lead spacing 37,5 mmCRVR

(Vrms

f < 60 kHz)

1000 Vdc0,10 µF(400 Vac)0,15 µF

0,22 µF0,33 µF0,47 µF

(450 Vac)0,10 µF

0,15 µF0,22 µF0,33 µF

1600 Vdc47 nF(450 Vac)68 nF

0,10 µF0,15 µF

2000 Vdc22 nF(500 Vac)33 nF

47 nF68 nF0,10 µF

Maximumdimensionsb × h × l (mm)12,0 × 22,0 × 41,514,0 × 25,0 × 41,516,0 × 28,5 × 41,520,0 × 39,5 × 41,520,0 × 39,5 × 41,514,0 × 25,0 × 41,516,0 × 28,5 × 41,518,0 × 32,5 × 41,520,0 × 39,5 × 41,512,0 × 22,0 × 41,514,0 × 25,0 × 41,518,0 × 32,5 × 41,520,0 × 39,5 × 41,512,0 × 22,0 × 41,514,0 × 25,0 × 41,516,0 × 28,5 × 41,518,0 × 32,5 × 41,520,0 × 39,5 × 41,5

Ordering code1)

Packing units (pcs)Untaped725648323256484832725648327256484832

B32686-A104-+B32686-A154-+B32686-A224-+B32686-A334-+B32686-A474-+B32686-A7104-+B32686-A7154-+B32686-A7224-+B32686-A7334-+B32686-A1473-+B32686-A1683-+B32686-A1104-+B32686-A1154-+B32686-A2223-+B32686-A2333-+B32686-A2473-+B32686-A2683-+B32686-A2104-+

Capacitance tolerance: ±20 % = M, ±10 % = K, ±5 % = J, ±5 %

1) + Code letter for capacitance tolerance

For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32686-A104-K3

184

12/00

元器件交易网

B32682…B32686

Technical data

Climatic category

in accordance with IEC 60068-1Lower category temperature TminUpper category temperature TmaxDamp heat testLimit values after damp heat test

55/100/56

MFP

55 °C+ 100 °C

56 days/40 °C/93% relative humidityCapacitance change | C/C|

Dissipation factor change tan δInsulation resistance Ris

or time constant τ = CR Ris0,5 VR; 40 °C 1 10 9/h = 1 fit

For a conversion table for other operating conditions and tem-peratures, refer to chapter “Quality assurance”, page327.

≤ 2 %

≤ 1,0 10 3 (at 10 kHz) ≥ 50 % of minimum as-delivered values

Reliability:

Reference conditionsFailure rate

Service life

Failure criteria:Total failure

Failure due to variation of parameters

200 000 h

Short circuit or open circuitCapacitance change | C/C|Dissipation factor tan δInsulation resistance Ris

or time constant τ = CR Ris2,0 VR, 2 s

T ≤ 85 °C: VC = 1,0 VR or 1,0 Vrms

> 10 %

4 upper limit values

< 1500 M (CR ≤ 0,33µF) < 500 s(CR > 0,33µF)

DC test voltage

Category voltage VC

Operation with dc voltage orac voltage Vrms up to 1 kHzDissipation factor tan δ (in 10 3)at 20 °C

(upper limit values)

CR ≤ 0,1 µF

at

1 kHz10 kHz100 kHz

–0,41,0

CR > 0,33 µF30 000 s

CR > 0,1 µF0,40,5–

Insulation resistance Ris

or time constant τ = CR Risat 20 °C, rel. humidity ≤ 65 % (minimum as-delivered values)

CR ≤ 0,33 µF100 G

185

12/00

元器件交易网

MFP

B32682…B32686

Pulse handling capability

Maximum permissible voltage change per unit of time for non-sinusoidal voltages(pulse, sawtooth) VR

Max. rate of voltage rise Vpp/τ in V/µs (for Vpp = VR)Lead spacing15 mm

630 Vdc1000 Vdc1250 Vdc1600 Vdc2000 Vdc

50009000120001600017000

22,5 mm3000500070001100015000

27,5 mm20003800450060008000

37,5 mm—2000280035004500

For Vpp < VR , the permissible voltage rise rate value Vpp/τ may be multiplied by the factor VR/Vpp.Also refer to the calculation example in chapter “General technical information”, page302. VR

Pulse characteristic k0 in V2/µs (for Vpp ≤ VR)Lead spacing15 mm

630 Vdc1000 Vdc1250 Vdc1600 Vdc2000 Vdc

630000018000000300000005100000068000000

22,5 mm380000010000000175000003500000060000000

27,5 mm25000007500000110000001900000032000000

37,5 mm—400000070000001100000018000000

186

12/00

元器件交易网

B32682MFP

15

Permissible ac voltage Vrms versus frequency fLead spacing 15 mm 630 Vdc/300 Vac

1000 Vdc/400 Vac

1250 Vdc/450 Vac

1600 Vdc/450 Vac

187

12/00

元器件交易网

MFP

15

B32682…B32684

Permissible ac voltage Vrms versus frequency fLead spacing 15 mm 2000 Vdc/500 Vac

188

12/00

元器件交易网

B32683MFP

22,5

Permissible ac voltage Vrms versus frequency fLead spacing 22,5 mm 630 Vdc/300 Vac

1000 Vdc/400 Vac

1250 Vdc/450 Vac

1600 Vdc/450 Vac

189

12/00

元器件交易网

MFP

22,5

B32683

Permissible ac voltage Vrms versus frequency fLead spacing 22,5 mm 2000 Vdc/500 Vac

190

12/00

元器件交易网

B32684MFP

27,5

Permissible ac voltage Vrms versus frequency fLead spacing 27,5 mm 630 Vdc/300 Vac

1000 Vdc/400 Vac

1250 Vdc/450 Vac

1600 Vdc/450 Vac

191

12/00

元器件交易网

MFP

27,5

B32684

Permissible ac voltage Vrms versus frequency fLead spacing 27,5 mm 2000 Vdc/500 Vac

192

12/00

元器件交易网

B32686MFP

37,5

Permissible ac voltage Vrms versus frequency fLead spacing 37,5 mm1000 Vdc/400 Vac

1250 Vdc/450 Vac

1600 Vdc/450 Vac

2000 Vdc/500 Vac

193

12/00

元器件交易网

MFPB32682…B32686

Flyback application

Permissible voltage and current / waveform

Permissible current Ipp versus frequency for a duty cycle of 20 % (t0 /t= 0,2):

Approximation formular for duty cycle higher than 20 %:

′Ipp

=Ipp

t

---0--3′t0

3

194

12/00

元器件交易网

B32682…B32686

Flyback application

permissible current Ipp versus rated capacitance CR Frequency = 15,75 kHz

MFP

Frequency = 31,5 kHz

Frequency = 95 kHz

195

12/00

元器件交易网

Herausgegeben von EPCOS AG

Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND

EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung undVerwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AGnicht gestattet.

Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaftenzugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungenfür Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.Diese Broschüre ersetzt die vorige Ausgabe.

Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgele-genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.

Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünftedarüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsge-sellschaft einzuholen.

Published by EPCOS AG

Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY

EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro-chure and the information contained therein without EPCOS’ prior express consent is prohibited.The information contained in this brochure describes the type of component and shall not be con-sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions forthe Supply of Products and Services of the Electrical and Electronics Industry recommended by theZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG orthe international Representatives.

Due to technical requirements components may contain dangerous substances. For information onthe type in question please also contact one of our Sales Offices.

本文来源：https://www.bwwdw.com/article/d9wj.html