H3C SSH配置示例

H3C SSH配置示例

配置Router作为SSH服务器 1] 生成RSA及DSA密钥对，并启动SSH服务器。 system-view

[Router] public-key local create rsa [Router] public-key local create dsa [Router] ssh server enable

2] 配置接口Ethernet1/1的IP地址，客户端将通过该地址连接SSH服务器。 [Router] interface GigabitEthernet0/3

[Router-GigabitEthernet0/3] ip address 172.21.33.253 255.255.255.128 [Router-GigabitEthernet0/3] quit

3] 设置SSH客户端登录用户界面的认证方式为AAA认证。 [Router] user-interface vty 0 4

[Router-ui-vty0-4] authentication-mode scheme [Router-ui-vty0-4] protocol inbound ssh [Router-ui-vty0-4] quit

# 创建本地用户client001，并设置用户访问的命令级别为3。 [Router] local-user ssh01

[Router-luser-ssh01] password cihper xxxxx [Router-luser-ssh01] service-type ssh

[Router-luser-ssh01] authorization-attribute level 3 [Router-luser-ssh01] quit 附:H3C MSR5006配置

#

version 5.20, Release 1809P01 #

sysname Router #

super password level 3 cipher V0T^_X)GN+OQ=^Q`MAF4<1!! #

domain default enable system #

dar p2p signature-file flash:/p2p_default.mtd #

vlan 1 #

domain system

access-limit disable state active

idle-cut disable

self-service-url disable #

user-group system #

local-user admin

password cipher .]@USE=B,53Q=^Q`MAF4<1!!

---- More ---- [16D [16D authorization-attribute level 3 service-type telnet local-user ssh01

password cipher ,-Z#Q

interface Aux0 async mode flow link-protocol ppp #

interface NULL0 #

interface Vlan-interface1

ip address 192.168.1.1 255.255.255.0 #

interface GigabitEthernet0/1 port link-mode route #

interface GigabitEthernet0/2 port link-mode route

#

interface GigabitEthernet0/3

---- More ---- [16D [16D port link-mode route ip address 172.21.33.253 255.255.255.128 #

interface GigabitEthernet0/0 port link-mode bridge #

ssh server enable #

load xml-configuration #

load tr069-configuration #

user-interface con 0 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme user privilege level 3 protocol inbound ssh #

return

本文来源：https://www.bwwdw.com/article/br4d.html