世纪网通CNG系列常用配置

世纪网通CNG系列常用配置

基本参数设置:

Login:root

Password:centnet

Centnet Cos [Software Version V03.01.r4.330 For CNG300 4FXS]

Copyright (C) By 1999-2004 Centnet Technologies Co..Ltd All rights reserved.

Centnet>con

Please input the Password:(密码为空)

Centnet/Conf>sup(超级管理员登陆)

Please input the Password:(密码为szcentnet)

Centnet/Conf>e0 (设置10M端口)

Centnet/Conf/E0>ip ***.***.***.*** 255.255.255.*** (设置IP地址和子网掩码)

Centnet/Conf/E0>quit

Centnet/Conf>route add def ***.***.***.*** (设置路由地址或网关地址)

Centnet/Conf>wr (写入FLASH闪存)

Centnet/Conf>h323

Centnet/Conf/H323>gk ***.***.***.*** (设置gkip)

Centnet/Conf/H323>h323id ******** (设置h323id)

Centnet/Conf/H323>qu

Centnet/Conf>wr

Centnet/Conf>dia t (设置拨号规则)

Centnet/Conf/Dial T>qu

Centnet/Conf>wr

Centnet/Conf>lin (设置各端口参数)

Centnet/Conf/LineALL>pre del t (删除被叫号码)

Centnet/Conf/LineALL>pre add ******(加入被叫号码)

Centnet/Conf/LineALL>num ****** (设置主叫号码)

Centnet/Conf/LineALL>ter (设置为终端模式)

Centnet/Conf/LineALL>dis (打开来电显示)

Centnet/Conf/LineALL>qu

Centnet/Conf>wr

恢复出厂设置命令：

Centnet/Conf>setdefault

重起网关命令:

Centnet/Conf>reboot

用E穿模式注册网守：

如果已经用GK注册网守,先去除GK命令,Centnet/Conf/H323>no gk

Centnet/Conf>easy ***.***.***.***

如果注册平台需要E.164值

Centnet/Conf/H323>alias ******* (此处为主叫号码的值)

免区号设置(郑州):

Centnet/Conf>dia 0t

Centnet/Conf/Dial 0T>qu

Centnet/Conf>dia t

Centnet/Conf/Dial T>pre +0371

Centnet/Conf/Dial T>qu

Centnet/Conf>wr

网关内部互打：

1.先给每个端口设置号码

Centnet/Conf>lin

Centnet/Conf/LineAll>pre del t (出厂值每个端口被叫号码都为T,如果存在一定要删除,如果已经删除过,这两步可以省略)

Centnet/Conf>lin 0

Centnet/Conf/Line0>pre add 99000

Centnet/Conf/Line0>qu

Centnet/Conf>lin 1

Centnet/Conf/Line1>pre add 99001

Centnet/Conf/Line1>qu

Centnet/Conf>lin 2

Centnet/Conf/Line2>pre add 99002

Centnet/Conf/Line2>qu

Centnet/Conf>lin 3

Centnet/Conf/Line3>pre add 99003

Centnet/Conf/Line3>qu

Centnet/Conf>wr

2.加映射本地的拨号规则

Centnet/Conf>dia 99t

Centnet/Conf/Dial 99T>map 127.0.0.1

Centnet/Conf/Dial 99T>qu

Centnet/Conf>wr

配合多路计费器使用，打开反极信号

Centnet/Conf/LineAll>invertcheck

设置PPPOE拨号连网

Centnet/Conf/E0>pppoe 帐号 密码

打开/关闭路由功能

Centnet/Conf/E0/Nat>start/stop

修改声音的增益问题：

回音调制

1.如果本地听到对方声音小 Centnet/Conf/LineAll>iv d ** (默认32)

2.如果对方听到本地声音小 Centnet/Conf/LineAll>ov d ** (默认32)

音量调制

1.如果本地听到对方声音小 Centnet/Conf/LineAll>iv a ** (默认32)

2.如果对方听到本地声音小 Centnet/Conf/LineAll>ov a ** (默认32)

当电话拨打对方，对方有响铃并可以接通，而本方电话没回铃

Centnet/Conf/Dial T>ter(设置振铃为终端模式，打开假回铃)

修改登陆密码：

Centnet/Conf>enpass *****

修改Config模式密码：

Centnet/Conf>conpass *****

给电话设置模式加密：

Centnet/Conf>app

Centnet/Conf/APP>ivr

Centnet/Conf/APP/IVR>ivrpass ******

Centnet/Conf/APP/IVR>qu

Centnet/Conf/APP>qu

Centnet/Conf>wr

IVR功能开启/关闭

Centnet/Conf/APP/IVR>ivrcon/no ivrcon(当关闭时，按电话**键，系统无任何提示语音)

IVR系统锁定/解锁

Centnet/Conf/APP/IVR>ivrlock/no ivrlock(当被锁定时，按电话**键，系统提示“系统已被锁”)

本文来源：https://www.bwwdw.com/article/bp84.html