H3C实验报告大全含18个实验17.0-标准ACL

标准ACL

实验人：高承旺 实验名称：标准acl 实验要求：

不让1.1.1.1 ping通3.3.3.3

实验拓扑：

实验步骤：

网络之间开启RIP协议！ [R1]rip [R1-rip-1]ver 2

[R1-rip-1]undo summary [R1-rip-1]net 192.168.1.0 [R1-rip-1]net 1.0.0.0 [R1-rip-1]q

[R2]rip

[R2-rip-1]ver 2

[R2-rip-1]undo summary [R2-rip-1]net 192.168.1.0 [R2-rip-1]net 192.168.2.0

[R2-rip-1]q

[R3]rip

[R3-rip-1]ver 2

[R3-rip-1]net 192.168.2.0 [R3-rip-1]net 3.0.0.0 [R3-rip-1]q

配置好动态路由后，测试能R1ping通3.3.3.3

配置ACL访问控制列表 [R2]firewall enable [R2]firewall default permit [R2]acl number ? INTEGER<2000-2999> Specify a basic acl INTEGER<3000-3999> Specify an advanced acl INTEGER<4000-4999> Specify an ethernet frame header acl INTEGER<5000-5999> Specify an acl about user-defined frame or packet head [R2]acl number 2000 [R2-acl-basic-2000]rule ? INTEGER<0-65534> ID of acl rule deny Specify matched packet deny permit Specify matched packet permit [R2-acl-basic-2000]rule deny source 1.1.1.1 ? 0 Wildcard bits : 0.0.0.0 ( a host ) X.X.X.X Wildcard of source [R2-acl-basic-2000]rule deny source 1.1.1.1 0 [R2]int s0/2/0 [R2-Serial0/2/0]firewall packet-filter 2000 ? inbound Apply the acl to filter in-bound packets outbound Apply the acl to filter out-bound packets [R2-Serial0/2/0]firewall packet-filter 2000 inbound

ACL查看命令 显示配置的访问控制列表的规则 [R2]display acl all Basic ACL 2000, named -none-, 1 rule, ACL's step is 5 rule 0 deny source 1.1.1.1 0 (5 times matched) [R2]display firewall-statistics all Firewall is enable, default filtering method is 'permit'. Interface: Serial0/2/0 In-bound Policy: acl 2000 Fragments matched normally From 2010-12-17 11:07:09 to 2010-12-17 11:16:29 0 packets, 0 bytes, 0% permitted, 5 packets, 420 bytes, 20% denied, 20 packets, 1072 bytes, 80% permitted default, 0 packets, 0 bytes, 0% denied default, Totally 20 packets, 1072 bytes, 80% permitted, Totally 5 packets, 420 bytes, 20% denied.

配置完事ping不通的 [R1]ping -a 1.1.1.1 3.3.3.3

PING 3.3.3.3: 56 data bytes, press CTRL_C to break Request time out Request time out Request time out Request time out Request time out

--- 3.3.3.3 ping statistics --- 5 packet(s) transmitted 0 packet(s) received 100.00% packet loss

在1上配置出站ACL ，把方法一在R2上的配置去掉！ [R1]firewall enable

[R1-acl-basic-2000]rule 20 deny source 1.1.1.1 0 [R1-Serial0/2/0]firewall packet-filter 2000 outbound [R1]int s0/2/0

[R1]ping -a 1.1.1.1 3.3.3.3

PING 3.3.3.3: 56 data bytes, press CTRL_C to break Request time out Request time out Request time out Request time out Request time out

--- 3.3.3.3 ping statistics --- 5 packet(s) transmitted 0 packet(s) received

100.00% packet loss

注意：标准的acl在应用的时候

本文来源：https://www.bwwdw.com/article/b5s6.html