华为28-11路由器设置方法（详细）

A进不了系统(按回车后没有提示符)解决办法：选择Boot Menu:里面的第6

个选项，就是绕过原有配置进入系统<6: Start up and ignore configuration>

Press Ctrl-B to enter Boot Menu Please input Bootrom password: Password Error!

Please input Bootrom password: Boot Menu:

1: Download application program with XMODEM 2: Download application program with NET 3: Set application file type

4: Display applications in Flash 5: Clear application password

6: Start up and ignore configuration 7: Enter debugging environment 8: Boot Rom Operation Menu

9: Do not check the version of the software a: Exit and reboot Enter your choice(1-a): 6

Start up and ignore configuration, Are you sure?[Y/N]y Set Succeeds

B可以进系统(按回车有提示符) Starting at 0x1c00000...

******************************************** * * * Quidway Series Routers Boot ROM, V9.08 * * * ********************************************

Copyright(C) 1997-2004 by HUAWEI TECH CO., LTD. Compiled at 17:12:44 , Jan 10 2005.

Testing memory...OK! 128M bytes SDRAM 32768k bytes flash memory Hardware Version is MTR 1.0 CPLD Version is CPLD 1.0 Press Ctrl-B to enter Boot Menu

The main application file does not exist--flash:/main.bin! The backup application file does not exist--flash:/backup.bin!

The current starting file is secure application file--flash:/secure.bin!

The secure application file is self-decompressing............................... ................................................................................ ................................................................................ ................................................OK! System is starting... Starting at 0x10000...

User interface Con 0 is available. Press ENTER to get started.

tb 27 16:53:14:371 2013 Quidway SHELL/5/LOGIN: Console login from con0

C：提示符下输入dis cur后按空格可显示所有配置 （后打dis cur回车，多敲几次空格显示所有配置） dis cur #

sysname Quidway #

FTP server enable #

ip pool 0 192.168.0.2 192.168.2.254 #

local-server nas-ip 127.0.0.1 key huawei #

domain default enable system #

ip host dns 61.166.150.101 #

radius scheme system server-type huawei

primary authentication 127.0.0.1 1645 primary accounting 127.0.0.1 1646 user-name-format without-domain #

domain system

access-limit disable state active #

local-user admin

password cipher .]@USE=B,53Q=^Q`MAF4<1!! service-type telnet terminal level 3

service-type ftp #

dhcp server ip-pool 1

network 192.168.0.0 mask 255.255.255.0 gateway-list 192.168.0.1 dns-list 61.166.150.101 #

interface Aux0 async mode flow link-protocol ppp #

interface Ethernet0/0

ip address 218.63.231.159 255.255.255.192 nat outbound static nat outbound 2001 #

interface Ethernet0/1

ip address 192.168.0.1 255.255.255.0 nat outbound static #

interface Serial0/0 clock DTECLK1 link-protocol ppp

ip address ppp-negotiate #

interface NULL0 #

acl number 2001

rule 0 permit source 192.168.0.0 0.0.0.255 # rip

network 218.63.231.0 #

dhcp server detect #

ip route-static 0.0.0.0 0.0.0.0 218.63.231.129 preference 60 #

user-interface con 0 user-interface aux 0 user-interface vty 0 4

authentication-mode scheme #

return

D：提示符下输入RESET命令清原来的配置

reset saved-configuration 回车，选择y 先清除原来的配置

reboot //重启清除配置才能生效，第一个选择n 第二个选择y

然后启动完成就是默认配置了，然后告诉我公网ip、 掩码、网关，内网的网段，我跟你编辑配置命令给你

E：提示符下进行重新配置，配置命令，建议一行一行的复制粘贴回车，回车后没有报

error信息就表明配置成功

第一个网线口是接外网的网线，第二个网线口是接内网的网线

Sys

acl number 2001

rule permit source 182.168.0.0 0.0.0.255 interface Ethernet0/0

ip address 220.163.156.19 255.255.255.0 nat outbound 2001 quit 不要这个

[Quidway] dhcp enable

[Quidway] dhcp server ip-pool 1

network 182.168.0.0 mask 255.255.255.0 gateway-list 182.168.0.1 dns-list 222.172.200.68 dns-list 61.166.153.123 interface Ethernet0/1

ip address 182.168.0.1 255.255.255.0 dhcp select global quit不要这个

ip route-static 0.0.0.0 0.0.0.0 220.163.156.1 quit

save //敲save，回车，选择y，即保存配置

F:保存取个文件名(*.cfg) save

The configuration will be written to the device. Are you sure?[Y/N]y

Please input the file name(*.cfg)[flash:/config.cfg]:201302.cfg

结束了

dhcp enable

% Unrecognized command found at '^' position.

这里开始之后的都没敲成功

dhcp enable要在[Quidway]下敲，你却在下敲，肯定会报错。

sys就到[Quidway]

[Quidway-Ethernet0/0]nat outbound 2001 [Quidway-Ethernet0/0]quit

[Quidway]quit //这个quit多敲了，我发给你的配置里面没有 dhcp enable

例子：

Starting at 0x1c00000...

********************************************

* *

* Quidway Series Routers Boot ROM, V9.08 *

* *

********************************************

本文来源：https://www.bwwdw.com/article/ar2r.html