开模分析报告范本

开模分析报告范本,供大家参考.评估一个模厂开模能力的好坏,不但要看他们的技术力量,还要看他们的TCR能力,从开模分析报告可了解他们工程技术力量水平.

Parting line

Core

PLCavity

The red line is PL ,please confirm !Page 1

开模分析报告范本,供大家参考.评估一个模厂开模能力的好坏,不但要看他们的技术力量,还要看他们的TCR能力,从开模分析报告可了解他们工程技术力量水平.

Texture AreaDraft suggestion1.5° 2° 3° 3.5°

PatternMT11000 MT11010 MT11020 MT11030

Depth (inch)0.0004 0.001 0.0015 0.002

1. Red and blue surface:MT11020

2. please draft the red surfaces from 1.5° to 3°

Page 2

开模分析报告范本,供大家参考.评估一个模厂开模能力的好坏,不但要看他们的技术力量,还要看他们的TCR能力,从开模分析报告可了解他们工程技术力量水平.

Gate location(1)Gate type: Sub gate Gate size: 1x1

Gate Location

1.If the red surface is texture area,the gate will destroy the surface of part. 2. So suggest cancelling the texture of red surface,or approve the proposa 2 (see next page)Page 3

开模分析报告范本,供大家参考.评估一个模厂开模能力的好坏,不但要看他们的技术力量,还要看他们的TCR能力,从开模分析报告可了解他们工程技术力量水平.

Gate location(2)Gate type: banana gate Gate size: 1x1.5

Suggest gate

Gate Location

Page 4

开模分析报告范本,供大家参考.评估一个模厂开模能力的好坏,不但要看他们的技术力量,还要看他们的TCR能力,从开模分析报告可了解他们工程技术力量水平.

Sliders (2)

SLIDE-2

There will be a Slide insert in the tool. The red line is the insert _ line , please confirm.

Page 5

开模分析报告范本,供大家参考.评估一个模厂开模能力的好坏,不但要看他们的技术力量,还要看他们的TCR能力,从开模分析报告可了解他们工程技术力量水平.

Draft check (2) CorePresent Design

Suggest Design

Red surface is undercut, please draft it 0.5° along the core side.

0.5°

Page 6

本文来源：https://www.bwwdw.com/article/8dn4.html