冲浪板QC检验报告SURFBOARDS INSPECT REPORT

该份为冲浪行业冲浪板检验验货报告较为专业的报告报表设计之一

SURFBOARDS INSPECTION REPORT冲浪板验货表DATE时间 INSPECTIR验货员 ORDER NO 验货单号 ITEM NO产品款号 DESIGN NO 设计 号 QTY数量

BOARD SIZE板的尺寸 INSPECT RESULT检验结果 BOARD DETAIL BOARD DESIGN 板的设计

LENGTH长_______

WIDTH宽_______

THICKNESS厚______

CORRECT SURF BLANK CORRECT 3 G5 2GL+1 BOX CORRECT

WRONG PCT FOAM WRONG 2 TWIN FIN 1BOX FIN WRONG

REMARK: EXCEL FOAM REMARK: 2GL+G5 TC-A5 REMARK: 3GL OTHERS_____ OTHERS______

冲浪板细节 BOARD MATERIAL板的材料 INSPECT RESULT检验结果 BOARD FIN MATCH板的尾舵 INSPECT RESULT检验结果 REMARK 补充：

ALL ABOVE CAN USE "V" OR "X" AND REMARK TO SHOW THE STATUS.以上可通过打V或打X来确定，通过备注来说明情况。

TOP板面 BAD POLISH抛光瑕疵 BOARD DEFECTS DENT 凹痕 SCRATCH 擦抓痕

BOTTOM板底

RAILS板缘

冲浪板瑕疵 FOAM DAMAGE发泡损坏 OVER SANDING 过度打磨 HOLES 洞 BAD PAINT 设计喷涂瑕疵 REMARK 补充： HERE USE DEFECTS QTY AND POSITION TO SHOW DEFECTS,IF NOTHING DEFECT,REMARK 0.此处通过描述数量和 位置来说明瑕疵，没有就注明。 BOARD REQUESTED PACKING要 BOARD PRODUCTION PACKING大货包装 求的包装 CORRECT REMARK: BOARD PACKING 冲浪板包装 WRONG

BOARD REQUESTED PACKING WRITE OUR REQUESTED PACKING,PRODUCTION PACKING IF CORRECT REMARK “V”,IF WRONG, REMARK“X”,THEN WRITE STATUS IN REMARK。板子要求的包装请如实填写我司要求的包装，大货包装若正确，打V,错误打X, 并且备注错误的情况。

BOARD WEIGHT 板重量

BOARD REQUESTED WEIGHT

BOARD PRODUCTION WEIGHT ACCEPT:____ REFUSE____

CONCLUSION 总结 ACCEPT: REFUSE:HERE REMARK WHAT'S NEED IMPROVE,AFTER IMPROVE CAN ACCEPT WITH V,REFUSE WITH X. OR THE GOODS NO NEED ANY IMPROVE,JUST REFUSE,WITH X OR JUST ACCEPT WITH V.此栏注明哪些需要修正，修正后接受打V,拒收打X。或是直接拒收不接 受修正打X。不用修正直接接受打V。

SUPPLIER COMMENT供应商意见： SUPPLIER SIGNATURE供应商负责人签名： DATE日期：

SURFBOARDS INSPECTION REPORT冲浪板验货表

本文来源：https://www.bwwdw.com/article/8ad4.html