FTR-P3CN012W1-01中文资料

n FEATURES

Compact for high density packaging.

(65% volume of previous generation FBR 5 /52 Series).l High contact capacity with proven contact material.

(100,000 operations, 14 V, 25 A achieved, even with reduced size).l 125 C version is available.

l Surface mount compatible version (reflowable) is available.l Coil power savings

(600mW nominal achieved with state-of-the-art magnetic analysis/design).

l Ease of PCB layout

(all terminals on perimeter, coil and contact terminals separated).l Optional over-voltage circuit breaking capability (0.6mm gap, contact our representative).

l Packaging for auto-insertion (tube packing, 30 relays/tube).

l

l RoHS compliant since date code: 0630

Please see page 8 for more information

n ORDERING INFORMATION

[Example]

(a) (b) (c) (d) (e) (f)

FTR-P3 C N 0 2 W ***(a) (b) (d) (e) (f)

FTR-P3 SeriesC N

P 009 0 0 0 2 W

Series Name Contact Arrangement Contact Gap Nominal Coil Voltage

Contact Material Custom Designation

: Form C : 0.3mm gap : 0.6mm gap : 09VDC: 0VDC : 2VDC

: Silver-tin oxide-indium

Nil : Standard (85 C)-01 : High temperature (125 C)

-05 : High temperature (125 C) and reflowable

Note: The part number stamped on the relay cover does not include "FTR". Example: Ordering part number: FTR-P3CN0 2W Stamped on part number: P3CN0 2W

n TYPICAL APPLICATIONS

Power window Door lock Sun roof

Power seat Wiper/IWW

Tilt steering

Retractable antenna

n SPECIFICATIONS

Specification

Item

ArrangementMaterial

ContactpathVoltageDrop(Initial)

Contact

Rating

MaximumCarryCurrent

MaximumInrushCurrent(Reference)MaximumSwitchingCurrent(Reference)MinimumSwitchingLoad*1(Reference)

Coil

OperatingAmbientTemperatureRangeStorageTemperatureRangeOperate(atnominalvoltage)Release(atnominalvoltage)Mechanical

Life

ElectricalVibrationResistanceShock

Resistance

Standard1formC(SPDT)Silver-tinoxide-indiumMaximum100m

(at2A12VDC)

Hightemperatureversion(-01,-05)

25Aat14VDC(lockedmotorload)

25A/1hour(25°C,100%ratedcoilvoltage)35A

35Aat16VDC1A,6VDC

-40°Cto+85°C(nofrost)

-40°Cto+125°C(nofrost)

-40°Cto+100°C(nofrost)-40°Cto+125°C(nofrost)Maximum10ms(notincludingbounce)

Maximum5ms(notincludingbounce,nodiode)Maximum15ms(notincludingbounce,withdiode)10x106operationsminimum

100x103operationsminimum,14VDC,25A(lockedmotorload)

(1operation=1forwardand1reverse)

TimingValues

OperationalOperational

Withstand,nodamage

10-55Hz,1.5mmdoubleamplitude(=9.13G@55Hz)100m/s2minimum(10G)1,000m/s2minimum(100G)100Mohms@500VAC500VACApproximately5g

Other

InsulationResistance(initial)

DielectricWithstandingVoltage(initial)Weight

*1 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operating environment.

2

n COIL DATA CHART

FTR-P3 Series

Model

NominalCoiilVoltage9VDC10VDC12VDC

CoilResistance(±10% at20ºC)

135 167 240

Must OperateVoltage5.5VDC(at20°C)6.9VDC(at85°C)6.3VDC(at20°C)7.9VDC(at85°C)7.3VDC(at20°C)9.2VDC(at85°C)

MustReleaseVoltage(at 20ºC)0.75VDC0.9VDC1.0VDC

CoilPower atNominalVoltage0.6W0.6W0.6W

ThermalResistance(approx.)73°C/W73°C/W73°C/W

FTR-P3CN009W1()FTR-P3CN010W1()FTR-P3CN012W1()

Note: ( ) is "Nil", "-0 ", or "-05"

3

n CHARACTERISTIC DATA

2. MAXIMUM BREAK CAPACITY

4. OPERATING COIL VOLTAGE RANGE

)

%( egatlov lanimon ot egatlov lioc fo oitaR-40

-20

20406080100

Ambient temperature C

3. COIL TEMPERATURE RISE

Ambient temperature: 20C

)

C120 seerg1000.6 W

ed( es80ir eruta60re0.6 Wpme40

0.6 W

t lioC2000

10

20

30

Applied time (minutes)

5

5. VIBRATION RESISTANCE CHARACTERISTIC

Dual amplitude (mm)

Acceleration (m/s2)

Frequency : 10~2000 Hz

Acceleration : 100 m/s2maximumVibration axis : see drawing belowDetection level : generation of 1 ms

or longer contact opening

Frequency (Hz)

6. SHOCK RESISTANCE CHARACTERISTIC

1,000800600

Shock duration : 111 ms, half-sine wave

Test condition: coil, energized and de-energizedImpact direction: see drawing below

Detection level : generation of 1ms or longercontact opening4002000

X1

X2

Y1Y2

Impact direction

Z1

Z2

: Break contact

(coil de-energized): Make contact (coil energized)

n REFERENCE DATA

Operating/release voltage distribution

Shock level (m/s2)

100

100

Operate and release time distribution

100

Contact resistance distribution

808080

Distribution (%)

Distribution (%)

Distribution (%)

606060

404040

202020

Ratio to rated voltage (%)

00

Time (ms)

Contact resistance (m)

6

n DIMENSIONS AND SCHEMATICS

n PRECAUTIONS

Please refer to the Engineering Reference in our relay databook for general precautions.

7

RoHS Compliance and Lead Free Relay Information

1. General Information

Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.

l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).

l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible).

l “LF” is marked on each outer and inner carton. (No marking on individual relays).

l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists.

Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)

l

2. Recommended Lead Free Solder Profile

l

Recommended solder paste Sn-3.0Ag-0.5Cu.

Reflow Solder condtionFlow Solder condtion:

Pre-heating: Soldering:

maximum 120 C

dip within 5 sec. at 260 C soler bath

Solder by Soldering Iron:

Soldering Iron

Temperature: maximum 360 CDuration: maximum 3 sec.

We highly recommend that you confirm your actual solder conditions

3. Moisture Sensitivity

l

Moisture Sensitivity Level standard is not applicable to electromechanical realys.

4. Tin Whisker

l

Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in

house test.

8

Fujitsu Components International Headquarter Offices

Japan

Fujitsu Component LimitedGotanda-Chuo Building

3-5, Higashigotanda 2-chome, Shinagawa-kuTokyo 8630, JapanTel: (8 -3) 5 9-70 0Fax: (8 -3) 5 9-2626

Email: promothq@Web:

North and South America

Fujitsu Components America, Inc.250 E. Caribbean Drive

Sunnyvale, CA 9 089 U.S.A.Tel: ( - 08) 7 5- 900Fax: ( - 08) 7 5- 970

Email: components@

Web: /us/services/edevices/components/

Europe

Fujitsu Components Europe B.V.Diamantlaan 25

2 32 WV HoofddorpNetherlands

Tel: (3 -23) 55609 0Fax: (3 -23) 5560950

Email: info@

Web: /components/

Asia Pacific

Fujitsu Components Asia Ltd.102E Pasir Panjang Road

#0 -0 Citilink Warehouse ComplexSingapore 8529Tel: (65) 6375-8560Fax: (65) 6273-302

Email: fcal@

Web: /sg/services/micro/components/

©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.

Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.Rev. July 26/2006

9

本文来源：https://www.bwwdw.com/article/6nl4.html