DF13-12P-1.25C中文资料

TypeDIP

Mounting Type

Mounting Height

5.3mm

St

ra

ig

ht

Type

SMT5.8mm

RightAngleType

DIP

3.6mm

SMT

sFeatures

1. Miniature Size

Designed in the low profile at mounting height 5.8mm.(SMT mounting straight type)

(For DIP type, the mounting height is to 5.3mm to thestraight and 3.6mm at the right angle)

Correspond to Automatic Mounting

Secure the automatic plain area for the absorptiontype automatic mounting machine.

Straight Type

Absorption area

2. Multi-contact

The double row type achieves the multi-contact up to 40contacts, and secures 30% higher density in the mounting area, compared with the single row type.

3. Correspond to Automatic Mounting

The header provides the grade with the vacuum absorption area, and secures automatic mounting by the embossedtape packaging.

In addition, the tube packaging can be selected.

4. Integral Basic Function Despite Miniature Size

The header is designed in a scoop-proof box structure, andcompletely prevents mis-insertion.

In addition, the surface mounting (SMT) header is equippedwith the metal fitting to prevent solder peeling.

Right Angle Type

Metal fitting

Absorption area

sApplications

Note PC, mobile terminal, miniature type business equipment,and other various consumer equipment, including videocamera

Figure 1

B183

元器件交易网

sProduct Specifications

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

sMaterial

sOrdering Information

qConnector

DF13 #- *S - 1.25 C

q

w

e

r

t

y

tContact Pitch: 1.25mmC : Crimping socket / DSA : Straight through holeDS : Right angle through hole / V : Straight SMTH : Right angle SMT

: DF13

: Blank: With bossA: Without boss

eNumber of ContactsSingle row: 2to 12, 14, 15Double row: 10, 20, 30, 40

qSeries NamewStyle Symbol

V Type

B: Without boss, embossed tape typerConnector Type

C: Without boss, embossed tape typeS: Single row socket / P: Single row pin header

DS: Double row socket / DP: Double row pin header

qContact

DF 13 - 2630 SCF A

q

w

e

qApplicable Cable Size 2630: AWG26to 30wPackaging Type SCF: Socket Contact/Reel

ePlating TypeBlank: Tin platedA : Gold plated

B184

元器件交易网

sSingle Row Socket

[Specific No.] - **, (**)Blank: 1 bag: 100 pcs.

Photo: Contact insertion

sDouble Row Socket

Photo: Contact insertion state

[Specific No.] –**, (**)

Blank: 1 bag: 100 pcs.

B185

元器件交易网

sSingle Row Straight Pin Header (Through hole)

[Specific No.] –**, (

**)Blank: Tin plated

20: Tin plated, tube packaging

BTube Dimensions

qBoard Through-hole Diameter:Ø0.6±0.03

sSingle Row Right Angle Pin Header (Through hole)

[Specific No.] –**, (***)(20): Tin plated tube packaging

BTube Dimensions

qBoard Through-hole Diameter:Ø0.6±

0.03

B186

元器件交易网

BSingle Row Straight Pin Header (SMT)

[Specific No.] –

**

, (

**)(20): Tin plated tube package(50): Gold plated tube package

This pin header is a box type style. Therefore, the header has neither vacuum absorptionface nor embossed tape packaging specification.Unit: mmBPCB mounting pattern BTube Dimensions

Note:If the pattern exists in the shaded area, and isn't treated with resist, it could touch the connector contact.

B187

元器件交易网

sSingle Row Straight Pin Header (SMT)

(Three-Wall/Correspond to Vacuum Absorption)

BPCB mounting pattern

Note 1.This hole isn't needed for "No guide post".Note 2.If the pattern exists in the shaded area,

and isn't treated with resist, it could touchthe connector contact.

[Specific No.] –**, (**)

(20): Tin plated tube packaging(21): Tin plated embossed tape packaging(50): Gold plated tube packaging(51): Gold plated embossed tape packaging

Note 2.Please order the embossed tape packaging product according to reel number. (1000 pcs. per reel)

B188

元器件交易网

sSingle Row Right Angle Pin Header (SMT)(Four-Wall/Correspond to Emboss Absorption)

BPCB mounting pattern

BTube Dimensions

[Specific No.] –**

, (**

)

(20): Tin plated tube packaging(21):

Tin plated embossed tape packaging(50): Gold plated tube packaging(51): Gold plated embossed tape packaging

Note 2.Please order the embossed tape packaging product according to reel number. (1000 pcs. per reel)

B189

元器件交易网

sDouble Row Straight Pin Header (SMT)

(Four-Wall Type Compliant to Emboss Absorption)

Unit: mm

Note 2.Please order the embossed tape packaging product according to reel number. (1 reel: 1000 pcs.)Note 3.The absorption cap is attached to the embossed tape packaging product.

B190

元器件交易网

s

Crimping Contact

qApplicable Cable (Tin Plating Annealed Copper Wire)

sales department.

qRecommended Cable

UL1571

qStrip Length

1.2to 1.9mm

BApplicable Crimping Tool

Hirose won't guarantee any product.

Note 2.The manual crimping tool is used to sequentially cut the reel contact with carrier.

BApplication Pattern

SMT

(Single Row Product)

Through hole(Single Row Product)

SMT

(Double Row Product)

StraightRightAngle

B191

元器件交易网

BEmbossed Carrier Tape Dimensions

KDF13B-*P-1.25V With bossKDF13C-*P-1.25V Without boss

KDF13-*P-1.25HKDF13A-*

P-1.25H

Unit: mm

B192

BPrecautions

1. Recommended Temperature Profile (SMT)

Note 1.This process is allowed up to twice under the same condition.

However, the interval between the first and second processes must be maintained atthe room temperature.

Note 2.The temperature indicates the board surface temperature in the connector lead area.

2. Recommended SolderingCondition (SMT)3. Recommended Screen Thickness (SMT)4. Board Warpage (SMT)5. Recommended SolderingCondition (Through hole) 6. Cleaning Condition7. Connection Condition

Manual soldering: 290ç for 2 seconds

0.15to 0.2mm

Max 0.03mm in the connector center area, based on both connector edges

Flow: 250ç for 3 seconds

Manual soldering: 290ç for 2 seconds

Refer to Nylon Connector Use Hand book.Refer to Nylon Connector Use Hand book.

sCarefully carry out the crimping operation according to "Crimping Condition Sheet" and"Crimping Quality Standard", because the crimping contact is an extremely small style.

8. CautionssBe careful for the excessive scoop insertion/extraction, which will cause damage to theproduct.

B193

本文来源：https://www.bwwdw.com/article/4xfq.html