MCS文件格式详解
更新时间:2024-04-18 18:57:01 阅读量: 综合文库 文档下载
Description
The iMPACT software can be used to generate the following PROM file formats:
? ? ?
Intel MCS-86 Hexadecimal Object (.mcs) Motorola EXORmacs (.exo) Tektronix HEX (.tek)
Hexadecimal files (\ASCII format can also be generated using the iMPACT software.
EXO files will not be support past iMPACT 11.4 and PROMGen will need to be used to change these files into MCS files.
For more PROM File Articles and other Configuration Related Articles, see (Xilinx Answer 34104).
Solution
PROMGen can be used to change file format from one type to the another in the following manner. The following changes an \promgen -p hex -r input.mcs -o output.hex PROM File Formats
INTEL MCS-86 HEXADECIMAL OBJECT File Format Code 88
The Intel Hexadecimal Object record format has a 9-character (4 field) prefix前缀 that defines the start of the record, byte count, load address, and record type, as well as a 2-character checksum suffix. 开始记录、字节个数、加载地址、记录类型、2字符的校验和后缀
The 16-bit hexadecimal format allows for a 20-bit segmented address space, and the 32-bit format allows for the 32-bit linear address space. 16 bit形式允许20 bit的分割的地址空间,32 bit形式允许32 bit的线性地址空间。 The six record types are: 00 = Data Record 数据记录
01 = End of File Record (signals the end of the file) 文件结尾记录
02 = Extended Segment Address Record (provides the offset to determine the absolute destination address) 段地址记录
03 = Start Segment Address Record (is ignored during input and not sent during output by Data I/O translator firmware)
04 = Extended Linear Address Record (provides the offset to determine the absolute destination address) * 线性地
址记录
05 = Start Linear Address Record (provides the execution start address) * 起始线性地址记录
*NOTE: The Extended Linear Address Record type and Start Linear Address Record type are supported only in the 32-bit format.
: 10 0010 00 0000 00E0 0400 0000 0400 0000 0C80 0480 E8 :16个字节 地址 数据
: 10 0020 00 0020 FCA7 0C80 0180 4010 01C9 0C00 0180 59 : 10 0030 00 0000 0090 0400 0000 0C00 0380 0000 6000 3D : 10 0040 00 0C00 0580 0000 6000 0400 0000 0400 0000 B7
:02000004000BEF 020000040001F9
:020000040000FA
(The Start Segment Address record (Type 03) is not used by Data I/O firmware.)
The checksum is the two's complement补码 of the binary summation of the preceding bytes in the record (including the byte count, address, and any data bytes) in hexadecimal notation.
The extended segment address record (Type 02) defines Bits 4 to 19 of the 20-bit segment base address. This address will be added to subsequent data record addresses to provide the absolute address. (This record can appear randomly in the file, but for this application, it will be the initial record.)
The extended linear address record (Type 04) defines bits 16 to 31 of the 32-bit linear base address. This address will be added to subsequent data record addresses to provide the absolute address.
NOTE: Always specify the address offset when using this format, even when the offset is zero.
The Data I/O firmware will force the record size to 16 (decimal) if the record size is specified greater than 16. MOTOROLA EXORmacs File Format Code 87
A Motorola data file may begin with a sign-on record, but for this application it will be ignored. (Data records have an 8- or 9-character prefix and a two- character checksum suffix.)
The Byte Count is the number of data bytes in the record plus 3 (for a four-hexadecimal character address) or plus 4 (for a six-hexadecimal character address) for the checksum and address.
The checksum is a one's complement of binary summation of preceding bytes in the record (including byte count, address, and data bytes) in hexadecimal notation.
************************************************************************************************
Tektronix maximum address:..................................................65536 (x100000) Motorola EXORmacs maximum address:..........................16777216 (x100000) 16-bit Intel MCS-86 Hexadecimal maximum address:..........1048576 (x100000) 32-bit Intel MCS-86 Hexadecimal maximum address:....4294967296 (x100000)
************************************************************************************************
TEKTRONIX HEXADECIMAL File Format Code 86
The Tektronix Hexadecimal format for a data file consists of a 9-character prefix (start character, address, byte count, and checksum of the prefix) followed by data bytes and ended by a 2-character checksum of the data characters. The end-of-file record consists only of control characters used to signal the end of the transmission and a byte count and sum-check for verification.
The prefix checksum is the 8-bit sum of the four-bit hexadecimal value of the six digits that make up the address and byte count. The data checksum is the 8-bit sum, modulo 256, of the 4-bit hexadecimal values of the digits that make up the data bytes.
AR# 34104 Description
The Configuration Design Assistant walks you through the recommended design flow for configuration while debugging commonly encountered issues, such as iMPACT software install and error messages, Cable Support, and FPGA related issues.The Design Assistant not only provides useful design and troubleshooting information, but breaks down the scope of configuration issues through this process.
NOTE:This answer record is part of the Xilinx Configuration Solution Center (Xilinx Answer 34904) Xilinx Configuration Solution Center is available to address all questions related to Configuration.
正在阅读:
MCS文件格式详解04-18
花雕酒和女儿红的区别02-09
中国现代史参考题目10-22
中国地质大学研究生院数理学院复试方案06-04
芽孢杆菌活菌数及芽孢数检测方法03-20
在全县残疾人职业技能培训班上的讲话03-16
2013地籍测绘竞赛复习提纲11-30
高中英语各单元词汇填空训练题06-19
- 多层物业服务方案
- (审判实务)习惯法与少数民族地区民间纠纷解决问题(孙 潋)
- 人教版新课标六年级下册语文全册教案
- 词语打卡
- photoshop实习报告
- 钢结构设计原理综合测试2
- 2014年期末练习题
- 高中数学中的逆向思维解题方法探讨
- 名师原创 全国通用2014-2015学年高二寒假作业 政治(一)Word版
- 北航《建筑结构检测鉴定与加固》在线作业三
- XX县卫生监督所工程建设项目可行性研究报告
- 小学四年级观察作文经典评语
- 浅谈110KV变电站电气一次设计-程泉焱(1)
- 安全员考试题库
- 国家电网公司变电运维管理规定(试行)
- 义务教育课程标准稿征求意见提纲
- 教学秘书面试技巧
- 钢结构工程施工组织设计
- 水利工程概论论文
- 09届九年级数学第四次模拟试卷
- 详解
- 格式
- 文件
- MCS